The role of daytime cues in the development of magnetic orientation in a night-migrating bird

To assess the role of celestial rotation during daytime in the development of the magnetic compass course, pied flycatchers (Ficedula hypoleuca Pallas, Muscicapidae) were handraised in Latvia under various celestial and magnetic conditions. Tests were performed during autumn migration in the local geomagnetic field (50 000 nT, 73° inclination) in the absence of celestial cues. A group of birds that had never seen the sky showed a bimodal preference for the migratory southwest-northeast axis, whereas a second group that had been exposed to the natural sky from sunrise to sunset in the local geomagnetic field showed a unimodal preference for the seasonally appropriate southwesterly direction. A third group that had also been exposed to the daytime sky, but in the absence of magnetic compass information, also oriented bimodally along a southwest-northeast axis. These findings demonstrate that observing celestial rotation during daytime enables birds to choose the right end of the migratory axis for autumn migration at the Latvian test location. This transformation of axial behavior into appropriate migratory orientation, however, requires the birds to have simultaneous access to information on both celestial rotation and the geomagnetic field. Received: 19 September 1997 / Accepted after revision: 22 November 1997     

Spawning behaviour and sex hormone levels in adult and precocious brown trout (Salmo trutta L.) males and the effect of anosmia

Summary. In the present experiment the behaviour and endocrine status of males of the brown trout, Salmo trutta L., (Salmoniformes: Salmonidae) were studied when males were kept in a stream tank with a nest digging female. Groups of mature adult males and precocious intact or anosmic male parr were placed with the nesting female so that the group resembled a natural spawning situation with big anadromous fish acting as dominant males and precocious parr acting as “sneakers”. A control experiment was also run with only males without a female present. In intact parr there were significant positive correlations between the per cent of the total observation time spent with a female, milt volume, and plasma concentration of 17α, 20β-dihydroxy-4-pregnen-3-one. Anosmic parr had significantly lower volumes of strippable milt and gonadal steroid hormone levels compared with intact parr. However, no differences were found in the control experiment. Significantly fewer anosmic parr attended and courted the nesting female and those anosmic fish that attended the female had significantly lower plasma levels of gonadal hormones. Intact parr also displayed a greater number of agonistic acts against other parr without any difference in fighting ability. No differences in aggression occured in the control experiment. In adult males together with a female, post-experimental gonadal steroid hormone levels were higher than pre-experimental levels. Positive correlations between aggression and androgen hormone levels were observed in adult males. No differences in plasma hormone levels were observed between adult males and intact precocious males. The results show that olfactory occlusion results in low steroid hormone levels and milt volumes in precocious males placed in a spawning situation. The courting behaviour was also affected by anosmia. Odours from the nesting female may have caused the enhanced plasma hormone levels and stimulated the males to attend the female. Received 15 May 1997; accepted 29 June 1997.     

Simulative governance: on the collaborative narrative of civil society participation in the CDM stakeholder framework

The Kyoto Protocol’s Clean Development Mechanism (CDM) is often cited as an exemplar of new, hybrid forms of global environmental governance operating at the public–private interface. Practically, enacting this arrangement involves a wide range of non-state actors. This broad involvement is here assumed to mark a shift towards more polycentric and networked modes of governance in which agents collaborate as ‘stakeholders’ in the process of consensual rule-setting and implementation. Using post-political critique, the depoliticising effects of the stakeholder framework on civil society actors are interrogated, using formal and informal participation opportunities to raise concerns regarding specific CDM projects. The analysis suggests that the CDM’s collaborative narrative of stakeholding structurally fails to stimulate public (re)engagement and is, instead, a prime example of simulative governance that struggles to achieve the simultaneity of two incompatibilities: the participatory revolution and the post-political turn.     

Economic and environmental value stream map (E2VSM) simulation for multi-product manufacturing systems

Value stream mapping (VSM) is a well-accepted tool within lean manufacturing concept which is often used for analysing and designing the flow of materials and information required to manufacture a product. However, the analysis is static and single product oriented, which fails to cope with either the variation of production plan or a multi-product environment. In addition, the environmental impact of a manufacturing system is highly associated with the dynamic consumption of energy and resources. Despite the recent integration of VSM with simulation or environmental studies (in the domain of energy efficiency), still neglected is the dynamic assessment of all the resources involved in a multi-product production environment. This paper presents a methodology for modelling multi-product manufacturing systems with dynamic material, energy and information flows with the aim to generate economic and environmental value stream maps (E²VSM). The proposed methodology is validated with an industrial case.     

Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard composites

This study investigated some of the important physical (thickness swelling) and mechanical (modulus of rupture, modulus of elasticity and internal bond) properties of single-layer particleboard panels made from eucalyptus (Eucalyptus camaldulensis Dehn.), waste of grass clippings (Lolium perenne L.) and combinations of the two. The chemical properties (pH, holocelluse and alpha cellulose contents, and water, alcohol-benzene and 1% sodium hydroxide solubilities) of the raw materials were also determined. Panels with a 6:94 ratio of grass-to-eucalyptus particles had the required mechanical properties for interior fitments including furniture and general uses. Boards manufactured with 100% grass clippings exhibited the lowest quality. The overall panel properties improved with a lower percentage of grass clippings added. Based on initial results, it also appears that grass should compose no more than 13% to achieve acceptable panel properties for interior fitments and general uses.     

Bench-scale composting of source-separated human faeces for sanitation

In urine-diverting toilets, urine and faeces are collected separately so that nutrient content can be recycled unmixed. Faeces should be sanitized before use in agriculture fields due to the presence of possible enteric pathogens. Composting of human faeces with food waste was evaluated as a possible method for this treatment. Temperatures were monitored in three 78-L wooden compost reactors fed with faeces-to-food waste substrates (F:FW) in wet weight ratios of 1:0, 3:1 and 1:1, which were observed for approximately 20 days. To achieve temperatures higher than 15 degrees C above ambient, insulation was required for the reactors. Use of 25-mm thick styrofoam insulation around the entire exterior of the compost reactors and turning of the compost twice a week resulted in sanitizing temperatures (>or=50 degrees C) to be maintained for 8 days in the F:FW=1:1 compost and for 4 days in the F:FW=3:1 compost. In these composts, a reduction of >3 log(10) for E. coli and >4 log(10) for Enterococcus spp. was achieved. The F:FW=1:0 compost, which did not maintain >or=50 degrees C for a sufficiently long period, was not sanitized, as the counts of E. coli and Enterococcus spp. increased between days 11 and 15. This research provides useful information on the design and operation of family-size compost units for the treatment of source-separated faeces and starchy food residues, most likely available amongst the less affluent rural/urban society in Uganda.     

Lysimeter Experiments to Investigate the Fate of Chemicals in Soils – Comparison of Five Different Lysimeter Systems

Several lysimeter scenarios and approaches exist to study the fate of agro-chemicals or contaminants from deposition in soil columns. In many systems just transport and leaching of the parent compound is followed, in some systems the leaching and transport of the metabolites is investigated as well. In more sophisticated lysimeter systems the volatilization and also the mineralization of the applied chemicals can be additionally monitored. Depending on the lysimeter system used and on the fact whether the applied chemicals are ¹⁴C-labeled or not, different results and various interpretations of the results might be achieved. Different lysimeter systems are described in this paper and a real dataset of a specific lysimeter experiment was transferred and evaluated in a virtual approach in the different lysimeter systems in order to show the advantages and disadvantages of the various systems.     

Molecular response of the sponge Suberites domuncula to bacterial infection

The aim of this study was the documentation of the molecular immune response of Suberites domuncula upon bacterial infection. Additionally, the bacteria that are naturally present in the sponge after prolonged aquarium maintenance were characterized. After 6 months of maintenance of S. domuncula in seawater aquaria, only one bacterial 16S rDNA sequence could be recovered, which belongs to the genus Pseudomonas. Concomitantly, morphologically uniform bacteria were found encapsulated in bacteriocytes. These findings indicate that certain bacteria, possibly of the genus Pseudomonas, are able to persist for long periods in host bacteriocytes. Subsequent to performing a previously established infection assay with S. domuncula, a potentially pathogenic Vibrio sp. was isolated from the tissues. Furthermore, the host tissue disintegrated and asexual propagation bodies (gemmules) were formed. In order to gain insights into the molecular events occurring after bacterial infection, the stress-response kinases, p38 protein kinase and JNK protein kinase, were analyzed. It is demonstrated that these two kinases are activated (phosphorylated) upon incubation of the tissue with the bacterial endotoxin lipopolysaccharide (LPS). Moreover, LPS strongly inhibits protein synthesis. It is concluded that there are many functionally different interactions between S. domuncula and bacteria and that the animal possesses mechanisms to differentiate between bacteria and to respond accordingly.     

Life cycle of PCBs and contamination of the environment and of food products from animal origin

This report gives a summary of the historic use, former management and current release of polychlorinated biphenyls (PCBs) in Germany and assesses the impact of the life cycle of PCBs on the contamination of the environment and of food products of animal origin. In Germany 60,000 t of PCBs were used in transformers, capacitors or as hydraulic oils. The use of PCB oils in these “closed applications”, has been banned in Germany in 2000. Thirty to 50% of these PCBs were not appropriately managed. In West Germany, 24,000 t of PCBs were used in open applications, mainly as additive (plasticiser, flame retardant) in sealants and paints in buildings and other construction. The continued use in open applications has not been banned, and in 2013, an estimated more than 12,000 t of PCBs were still present in buildings and other constructions. These open PCB applications continuously emit PCBs into the environment with an estimated release of 7–12 t per year. This amount is in agreement with deposition measurements (estimated to 18 t) and emission estimates for Switzerland. The atmospheric PCB releases still have an relevant impact on vegetation and livestock feed. In addition, PCBs in open applications on farms are still a sources of contamination for farmed animals. Furthermore, the historic production, use, recycling and disposal of PCBs have contaminated soils along the lifecycle. This legacy of contaminated soils and contaminated feed, individually or collectively, can lead to exceedance of maximum levels in food products from animals. In beef and chicken, soil levels of 5 ng PCB-TEQ/kg and for chicken with high soil exposure even 2 ng PCB-TEQ/kg can lead to exceedance of EU limits in meat and eggs. Areas at and around industries having produced or used or managed PCBs, or facilities and areas where PCBs were disposed need to be assessed in respect to potential contamination of food-producing animals. For a large share of impacted land, management measures applicable on farm level might be sufficient to continue with food production. Open PCB applications need to be inventoried and better managed. Other persistent and toxic chemicals used as alternatives to PCBs, e.g. short chain chlorinated paraffins (SCCPs), should be assessed in the life cycle for exposure of food-producing animals and humans.     

The humanitarian common logistic operating picture: a solution to the inter‐agency coordination challenge

Although significant progress has been made in developing the practice of humanitarian logistics, further improvements in efficiency and effectiveness have the potential to save lives and reduce suffering. This paper explores how the military/emergency services’ concept of a common operating picture (COP) can be adapted to the humanitarian logistics context, and analyses a practical and proven approach to addressing the key challenge of inter‐agency coordination and decision‐making. Successful adaptation could provide the mechanism through which predicted and actual demands, together with the location and status of material in transit, are captured, evaluated, and presented in real time as the basis for enhanced decision‐making between actors in the humanitarian supply network. Through the introduction of a humanitarian logistics COP and its linkages to national disaster management systems, local communities and countries affected by disasters and emergencies will be better placed to oversee and manage their response activities.