Fate of antimony in municipal solid waste incineration

The average antimony concentration in municipal solid waste is estimated to be about 10-60 ppm. Thermodynamical models predict a volatile behavior for antimony compounds, yet literature mass balances show that about 50% of the antimony input remains in the grate ashes. This fact can be explained by the formation of thermally stable antimonates in the fuel bed due to interactions with alkali or earth-alkali metals. Thermogravimetric experiments revealed an increased thermal stability for antimony oxide in presence of oxygen and calcium oxide. Spiking experiments on the test incinerator TAMARA showed that chlorination processes have a strong effect on antimony volatilization whereas high fuel-bed temperatures and addition of antimony oxide only have a moderate effect. In the grate ashes, antimony shows a pH-depending leaching property, which is typical for anionic species. This fact supports the thesis that antimony is present in the grate ashes in an anionic speciation.     

Adsorption of PCDD/F on MWI fly ash

The removal of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) from waste incinerator off-gas is a costly task, because a considerable part of the PCDD/F may exist in the gas phase (often 50-100% around 200 degrees C). The volatile fraction passes the particle filter and the subsequent gas cleaning equipment, so that an additional unit is needed to remove the gaseous PCDD/F from the flue gas. Moreover, dioxins and furans can accumulate in some parts of the equipment in a way that they can act as a latent source. In this work, we investigate the possibility to adsorb the PCDD/F at the fly ash particles and to remove them during the filtration. The gas/particle partitioning of the PCDD/F depends on the temperature, the vapor pressure, the particle size, the particle number density and on the physical and chemical properties of the particle surface. These relationships are investigated by model calculations and by pilot scale experiments (500 Nm3/h) which employ one selected hexachlorinated dioxin congener. At room temperature, approx. 90% of the HxCDD are found in the particulate phase, while at 135 degrees C that portion is only 10%. This means that at ambient temperatures, the gas/particle partitioning of the dioxin corresponds well to the sublimation equilibrium. At higher temperatures, it is much different from the sublimation equilibrium and the apparent adsorption enthalpy is smaller than the enthalpy of sublimation. This observation is in agreement with literature data. From the above experiments and from similar literature data, the efficiency of fly ash particles as a sink for PCDD/F can be evaluated. The data suggest that the adsorption rate is not the limiting factor for the transfer into the particulate phase. The important factors appear to be the chemical composition of the fly ash and the temperature.     

Spatial and temporal trends of metals and arsenic in German freshwater compartments

Cadmium, lead, mercury, copper, nickel, zinc, and arsenic were analyzed in suspended particulate matter (SPM), zebra mussels, and bream sampled yearly under the program of the German Environmental Specimen Bank (ESB) in the rivers Rhine, Elbe, Danube, Saar, Mulde, and Saale and in Lake Belau. Temporal and spatial trends were analyzed, correlations between metal levels in different specimen types assessed, and sampling sites ranked according to their metal levels by calculating a Multi-Metal Index (MMI) for every specimen type and site. SPM: Highest metal loads were detected in Mulde, Saale, and Elbe right downstream of the Saale confluence. In the Elbe, metal loads in SPM were mostly highest in the upper and middle section of the river while in Rhine and Saar concentrations increased downstream. Temporal trends since 2005 were detected only at three sites. Zebra mussel: MMIs were highest in the tidal section of the Elbe and the lower Rhine and lowest in Lake Belau and the upper Danube. Different temporal trends were detected since the early 1990s depending on site and metal. Bream: As, Pb, Cu, and Hg were analyzed in muscle tissue and Pb, Cd, Cu, and Zn in liver. For both tissues, MMIs were highest in Mulde and Saale and the lower and middle Elbe. Since the early 1990s, Hg, Pb, and Cu decreased in bream muscle at many sites while As increased at 6 of the 17 sites. The findings indicate that Hg, Pb, and Cu have obviously decreased in many freshwater ecosystems in recent years, whereas As and Ni levels have increased at several sites. Metal levels and temporal trends mostly differed between the specimen types under investigation and only few correlations between specimen types were detected. This underlines the importance of including different components of an ecosystem when assessing its environmental quality.     

Speicheldrüsenhyperplasien durch Noradrenalin

The Science of Nature -     

Man-made chemicals found in remote areas of the world: the experimental definition for POPs

Members of the United Nations Economic Commission for Europe (UN-ECE) signed a legally binding protocol on persistent organic pollutants (POPs) in February 1998 under the Convention on Long-Range Transboundary Air Pollution. A treaty that intends to control the production, import, export, disposal and use of toxic chemicals that persist for decades in the environment has been formally signed at a conference in May 2001 in Stockholm. The 2001 POP treaty, like the 1998 LRTAP POP protocol, contains a provision on adding further chemicals to the initial group of twelve or fifteen. The occurrence of a compound or a group of compounds in so called remote and pristine areas, e.g. in the Artic or in the Southern Hemisphere, proves its stability under the chemical and biological conditions of the environment. Compounds identified in this way, in samples taken primarily in very remote regions of the planet, are classified by their environmental fate and global distribution as persistent organic pollutants (POPs), regardless of any political assessments.     

Polypropylene as regenerable absorber for PCDD/F emission control

A new method for the PCDD/F reduction in exhaust gases of incineration plants is based on the property of polypropylene (PP) of interacting with PCDD/F to a variable degree depending on the temperature. After having been loaded with PCDD/F at approx. 80 degrees C, the PP absorber material can be regenerated by a temperature increase of about 50 degrees C. Hence, PP can be applied in a closed cycle as a thermally regenerable PCDD/F separator without an additional waste flow being generated. The setup of the pilot plant and the first results achieved shall be described.     

Skimming behaviour and spreading potential of Stenus species and Dianous coerulescens (Coleoptera: Staphylinidae)

Rove beetles of the genus Stenus Latreille and the genus Dianous Leach possess pygidial glands containing a multifunctional secretion of piperidine and pyridine-derived alkaloids as well as several terpenes. One important character of this secretion is the spreading potential of its different compounds, stenusine, norstenusine, 3-(2-methyl-1-butenyl)pyridine, cicindeloine, α-pinene, 1,8-cineole and 6-methyl-5-heptene-2-one. The individual secretion composition enables the beetles to skim rapidly and far over the water surface, even when just a small amount of secretion is emitted. Ethological investigations of several Stenus species revealed that the skimming ability, skimming velocity and the skimming behaviour differ between the Stenus species. These differences can be linked to varied habitat claims and secretion saving mechanisms. By means of tensiometer measurements using the pendant drop method, the spreading pressure of all secretion constituents as well as some naturally identical beetle secretions on the water surface could be established. The compound 3-(2-methyl-1-butenyl)pyridine excelled stenusine believed to date to be mainly responsible for skimming relating to its surface activity. The naturally identical secretions are not subject to synergistic effects of the single compounds concerning the spreading potential. Furthermore, evolutionary aspects of the Steninae’s pygidial gland secretion are discussed.     

Integrating selected ecological effects of mixed European beech–Norway spruce stands in bioeconomic modelling

The simplicity of many bioeconomic models has been criticised several times, due to their lack of realism resulting from a deterministic nature and a single-species focus. In this context it was interesting to test the financial sensitivity of bioeconomic modelling against fairly well documented ecological effects in mixed forests. For this purpose our study linked existing results of ecological research with bioeconomic modelling. The presented methodological approach could not only show the importance of considering ecological effects in bioeconomic models; it in fact enabled prioritising ecological research from a financial point of view.In a first step, the possible influence of the tree species mixture on forest stand resistance, productivity and timber quality was derived from existing studies. In a second step, the available Monte Carlo simulations for Norway spruce (Picea abies [L.] Karst.) and European beech (Fagus sylvatica L.), simulated under site conditions and risks typical of southern Germany, were extended by the mentioned ecological effects and then evaluated from a financial perspective.The results showed a clear influence of all tested ecological effects on the financial indicators, financial risk and return. While testing each ecological effect separately, an increased resistance against wind, snow and insect attacks had the greatest influence on financial risk and return. It over-proportionally enhanced the financial return while simultaneously the financial risk was reduced. In contrast, a degraded timber quality could eliminate the positive effect of risk compensation in mixed forests almost completely. The least influence on the financial indicators finally showed a changed volume growth in mixed forests.A combination of the separately tested ecological effects (increased resistance, changed volume growth and decreased timber quality), between both tree species, underlined the dominating importance of the stand resistance. The integration of ecological effects, induced by interdependent tree species, in our bioeconomic model resulted in significantly lower financial risk than ignoring these effects. Moreover, the financial return of mixed stand variants with a proportion of Norway spruce greater than 60% even exceeded that of the most profitable pure stand.In conclusion this paper clearly confirmed that ignoring ecological effects in bioeconomic models could lead to seriously biased financial results. While a changed volume growth proved rather to be of minor importance for European beech/Norway spruce stands, tree resistance and timber quality may change the financial results significantly.