Determination of nitrate and other water quality parameters in groundwater from UV/Vis spectra employing partial least squares regression

The use of UV/Vis spectroscopy in combination with partial least squares (PLS) regression for the simultaneous prediction of nitrate and non-purgeable organic carbon (NPOC) in groundwaters was evaluated. A model of high quality was obtained using first order derivative spectra in the range 200-300 nm. Inclusion of non-UV-absorbing constituents in the modeling procedure, i.e., chloride, sulfate, fluoride, total carbon (TC), inorganic carbon (IC), alkalinity, pH and conductivity was also evaluated. This model seemed to be useful for prediction of chloride, TC, IC, alkalinity and conductivity, while its ability to predict sulfate, fluoride and pH was poor. In conclusion, application of PLS regression, which requires neither filtration of samples nor addition of chemicals, is a promising alternative for fast interpretation of geochemical patterns of groundwater quality.     

Historical pollution of seldom monitored trace elements in Sweden--Part A: sediment properties and chronological indicators

Sediment cores from four small oligotrophic boreal lakes, with minor acidification, in remote regions of central Sweden were used for historical interpretation of their metal content, with focus on Cu, Cd, Pb and Zn in Lake Stensj?n, which has the longest sediment record (at least two centuries according to (210)Pb dating). Comparison is made with the other three lakes. Major and trace elements in lake water, porewater and the acid-leached (HNO(3)) solid sediment phase was analysed with ICP-MS. In addition, general lake water chemistry, TOC and principal anions were measured in the aqueous phases. Redistribution processes were interpreted from geochemical modelling. The solid/solution distribution of pe/pH sensitive elements, indicates a minor diagenetic redistribution and the concentration profiles are therefore suitable for chronological evaluation. The ratios of Al, Ti, Sc and V, indicated a qualitative shift of sedimenting material a century ago, which did not have any impact on the retention of trace elements. Lead had a concentration profile, supported by the (206)Pb/(207)Pb ratio, where it was possible to distinguish preindustrial conditions, early industrialisation in Europe, industrialisation in Sweden, and the use of leaded petrol after the Second World War. Cadmium showed a similar concentration pattern. The zinc profile resembled that of cadmium, but with less enrichment. Local lithogenic sources are believed to be quantitatively important. The solid/solution distribution (K(d)) was independent of depth for all four elements. The sediment concentrations of copper and zinc are not related to early industrialisation but its concentration has doubled since the Second World War.     

Diurnal variations of abiotic parameters in a stream,recipient for drainage water in Ranstad,southwest Sweden

During 24 h, water samples were taken for determination of a number of key parameters in a water system containing high concentrations of FeII at circumneutral pH. None of the major constituents (Ca, Mg, Na, K and sulfate) showed diurnal variations, while dissolved oxygen and pH increased during the night. This increase could entirely be explained by the decrease in water temperature. However, the concentration of FeII slightly increased at constant concentration of total Fe during the night, opposite to earlier observations in other systems where the presence of FeII was shown to be controlled by photoreduction. Nocturnal peaks of FeII have also been observed in other systems with high iron concentrations, however, at acidic pH, but without obvious explanation. The mechanisms for this process therefore need further investigation.     

Sulfur recirculation for increased electricity production in Waste-to-Energy plants

Sulfur recirculation is a new technology for reducing boiler corrosion and dioxin formation. It was demonstrated in full-scale tests at a Waste to Energy plant in Göteborg (Sweden) during nearly two months of operation. Sulfur was recirculated as sulfuric acid from the flue gas cleaning back to the boiler, thus creating a sulfur loop.The new technology was evaluated by extensive measurement campaigns during operation under normal conditions (reference case) and operation with sulfur recirculation. The chlorine content of both fly ash and boiler ash decreased and the sulfur content increased during the sulfur recirculation tests. The deposit growth and the particle concentration decreased with sulfur recirculation and the dioxin concentration (I-TEQ) of the flue gas was reduced by approximately 25%. Sulfuric acid dew point measurements showed that the sulfuric acid dosage did not lead to elevated SO₃ concentrations, which may otherwise induce low temperature corrosion.In the sulfur recirculation corrosion probe exposures, the corrosion rate decreased for all tested materials (16Mo3, Sanicro 28 and Inconel 625) and material temperatures (450 °C and 525 °C) compared to the reference exposure. The corrosion rates were reduced by 60–90%. Sulfur recirculation prevented the formation of transition metal chlorides at the metal/oxide interface, formation of chromate and reduced the presence of zinc in the corrosion products. Furthermore, measured corrosion rates at 525 °C with sulfur recirculation in operation were similar or lower compared to those measured at 450 °C material temperature in reference conditions, which corresponds to normal operation at normal steam temperatures. This implies that sulfur recirculation allows for higher steam data and electricity production without increasing corrosion.     

Determination of isocyanic acid in air

A method is presented for the determination of isocyanic acid (ICA), HNCO, in air samples as a di-n-butylamine (DBA) derivative. The method is based on sampling in midget impinger flasks containing 10 ml of 0.01 mol l-1 DBA in toluene. Quantification was made using liquid chromatography (LC) and electrospray mass spectrometry (MS) monitoring positive ions. The instrumental detection limit for the LC-MS was 10 fmol of ICA-DBA. ICA was generated by thermal decomposition of urea. A standard solution containing the DBA derivatives of ICA was prepared by collecting the emitted ICA in an impinger flask containing DBA. ICA in the reference solution was characterised by LC and time-of-flight (TOF) MS and quantified by LC chemiluminescent nitrogen detection (LC-CLND). The instrumental detection limit for the LC-CLND was 1 ng of nitrogen. ICA was emitted during thermal degradation of PFU resins and polyurethane (PUR) lacquers, from car metal sheets. ICA was the most dominant isocyanate and in PUR coating up to 8% of the total weight was emitted as ICA and for PFU resins up to 14% was emitted as ICA. When air samples were collected in an iron foundry during casting in sand moulds with furan resins, concentrations of ICA in the range 50-700 micrograms m-3 were found in the working atmosphere.     

I will not go,I cannot go: cultural and social limitations of disaster preparedness in Asia,Africa, and Oceania

While much work has been invested in addressing the economic and technical basis of disaster preparedness, less effort has been directed towards understanding the cultural and social obstacles to and opportunities for disaster risk reduction. This paper presents local insights from five different national settings into the cultural and social contexts of disaster preparedness. In most cases, an early warning system was in place, but it failed to alert people to diverse environmental shocks. The research findings show that despite geographical and typological differences in these locations, the limitations of the systems were fairly similar. In Kenya, people received warnings, but from contradictory systems, whereas in the Philippines and on the island of Saipan, people did not understand the messages or take them seriously. In Bangladesh and Nepal, however, a deeper cultural and religious reasoning serves to explain disasters, and how to prevent them or find safety when they strike.     

Chain-Length Shortening of Methyl Ethyl Hydroxyethyl Cellulose: An Evaluation of the Material Properties and Effect on Foaming Ability

During the past century, plastics have become a natural element in our every-day life. Lately however, an awareness about the fossil origin and often non-degradable nature of many plastics is rising. This has resulted in the emergence of some bio-based and/or biodegradable plastics, often produced from renewable resources. One possible candidate for bioplastics production could be found in cellulose. This paper aims at contributing information regarding a cellulose derivative, which could possibly be used in foamed plastics applications. Therefore, the reduction of the chain-length of a methyl ethyl hydroxyethyl cellulose (MEHEC), assessed by size exclusion chromatography, and the effect of chain-length on the foaming behaviour were studied. The foaming was accomplished with a hot-mould technique using aqueous polymer solutions. The generated steam was here used as the blowing agent and important parameters were polymer concentration and solution viscosity. The density of the produced foams was assessed and was in some cases comparable to that of commodity foams. It was found that reducing the chain-length enabled an increase of the initial polymer concentration for the foaming process. This is believed to be beneficial for creating more structurally stable foams of this type.     

A global Fordian compromise?—And what it would mean for the transition to sustainability

At first, it may seem as if the sustainable transition would force us to make a cynical trade-off between (a) the immediate needs of the global poor and (b) the future needs of the global rich. Crucial objectives, such as climate stability, are commonly held to be unattainable if the rest of the world would come to enjoy present Western living standards.Challenging this pessimistic analysis, this essay explores the possibility of opening up advanced technological paths to environmental sustainability by means of a “global Fordian compromise”. Built around trade reform, such a compromise would resemble its historic namesake by not seeking individual moral reform, as emphasized in environmental citizenship theory, but rather by drawing on the momentum of existing socio-economic dynamics.     

Bimodal orientation and the occurrence of temporary reverse bird migration during autumn in south Scandinavia

Extensive ringing data from a coastal site (Falsterbo Bird Observatory) in southwesternmost Sweden were used to investigate the occurrence of reverse autumn migration among 20 passerine bird species of widely different migration categories. The data demonstrate that reverse migration is a widespread and regular phenomenon among nocturnal as well as diurnal migrants and among irruptive migrants, temperate zone migrants, and long-distance migrants destined for tropical winter quarters. The reoriented movements were directed approximately opposite to the normal migration direction, i.e. between NNW and ENE from the coast and towards inland. Median distances of reverse movements varied between 9 and 65 km. Some individuals of irruptive and partial migrants settled to winter in the reverse direction. Bird species with relatively small fat reserves at capture were more likely to perform reverse migratory movements than species with larger fat deposits. In two species birds performing forward migration were significantly heavier within 10 days after capture than individuals performing reverse movements. The reoriented movements probably are of adaptive significance for birds confronted with the sea and pre-disposed to refuelling during migration. A bimodal orientation mechanism will bring the birds from an area with high competition for food and high predation risk to more suitable resting and feeding grounds before resuming migration in the forward direction and crossing the barrier. Received: 11 July 1995/Accepted after revision: 19 November 1995