Transport impacts on atmosphere and climate: Land transport

Emissions from land transport, and from road transport in particular, have significant impacts on the atmosphere and on climate change. This assessment gives an overview of past, present and future emissions from land transport, of their impacts on the atmospheric composition and air quality, on human health and climate change and on options for mitigation.In the past vehicle exhaust emission control has successfully reduced emissions of nitrogen oxides, carbon monoxide, volatile organic compounds and particulate matter. This contributed to improved air quality and reduced health impacts in industrialised countries. In developing countries however, pollutant emissions have been growing strongly, adversely affecting many populations. In addition, ozone and particulate matter change the radiative balance and hence contribute to global warming on shorter time scales. Latest knowledge on the magnitude of land transport's impact on global warming is reviewed here.In the future, road transport's emissions of these pollutants are expected to stagnate and then decrease globally. This will then help to improve the air quality notably in developing countries. On the contrary, emissions of carbon dioxide and of halocarbons from mobile air conditioners have been globally increasing and are further expected to grow. Consequently, road transport's impact on climate is gaining in importance. The expected efficiency improvements of vehicles and the introduction of biofuels will not be sufficient to offset the expected strong growth in both, passenger and freight transportation. Technical measures could offer a significant reduction potential, but strong interventions would be needed as markets do not initiate the necessary changes. Further reductions would need a resolute expansion of low-carbon fuels, a tripling of vehicle fuel efficiency and a stagnation in absolute transport volumes. Land transport will remain a key sector in climate change mitigation during the next decades.     

Environmental impact of flood: the study of arsenic speciation in exchangeable fraction of flood deposits of Warta river (Poland) in determination of "finger prints" of the pollutants origin and the ways of the migration

The paper presents the application of the hyphenated technique - high-performance liquid chromatography with atomic absorption spectrometry detection with hydride generation (HPLC-HG-AAS) - in the determinations of inorganic forms of arsenic: As(III) and As(V) in the exchangeable fraction of flood deposits. The separation of analytical signals of the determined arsenic forms was obtained using an ion-exchange column in a chromatographic system with the atomic absorption spectrometer as a detector, at the determination limits of 5 ng g⁻¹ for As(III) and 10 ng g⁻¹ for As(V). Flood deposits were collected after big flood event in valley of the Warta river which took place in summer 2010. Samples of overbank deposits were taken in Poznań agglomeration and vicinity (NW Poland). The results of determinations of arsenic forms in the exchangeable fraction of flood deposits allowed indication of a hypothetical path of deposits migration transported by a river during flood and environmental threats posed by their deposition by flood.     

The Future of Baltic Sea Populations: Local Extinction or Evolutionary Rescue?

Environmental change challenges local and global survival of populations and species. In a species-poor environment like the Baltic Sea this is particularly critical as major ecosystem functions may be upheld by single species. A complex interplay between demographic and genetic characteristics of species and populations determines risks of local extinction, chances of re-establishment of lost populations, and tolerance to environmental changes by evolution of new adaptations. Recent studies show that Baltic populations of dominant marine species are locally adapted, have lost genetic variation and are relatively isolated. In addition, some have evolved unusually high degrees of clonality and others are representatives of endemic (unique) evolutionary lineages. We here suggest that a consequence of local adaptation, isolation and genetic endemism is an increased risk of failure in restoring extinct Baltic populations. Additionally, restricted availability of genetic variation owing to lost variation and isolation may negatively impact the potential for evolutionary rescue following environmental change.     

Profile of trace elements in Parasol Mushroom (Macrolepiota procera) from Tucholskie Forest

The aim of this study was to determine 19 elements contents and bioconcentration potential in fruiting bodies of Parasol Mushroom (Macrolepiota procera) collected from the Tucholskie Forest complex in Poland. Also discussed were Cd, Pb and Hg contents of edible caps in relation to the current regulatory standards. K, P and Mg were particularly abundant in caps and stipes, median values were 38-49, 13, and 1.6-1.6 mg/g dry weight, and followed by Ca, Na and Rb at 110-540, 44-240 and 20-50 μg/g dw, respectively. Concentrations of Al, Fe, Zn, Cu and Mn were from less than 50 to 180 μg/g dw, while concentrations of other elements were ～l.0?μg/g dw or less. Cu, K, Ag, Cd, Na, Rb, Zn and Hg were bioconcentrated (BCF >1), while Al, Ba, Fe, Mn, Co, Sr, Pb and Cr were not bioaccumulated (BCF <1). Cd and Pb content of Parasol Mushroom's edible caps collected from some sites in the Tucholskie Forest exceed the maximum levels set in the EU for cultivated mushrooms.     

Optimized yeast-based in vitro bioassay for determination of estrogenic and androgenic activity of hydroxylated / methoxylated metabolites of BDEs / CBs and related lipophilic organic pollutants

ABSTRACT

Persistent organic pollutants (POPs) are known to show endocrine disrupting (ED) activity, including interactions with hormone receptors. The aim of this work was to develop a bioassay applicable for evaluation of ED potency of highly lipophilic metabolites of POPs. To that end, a yeast-based bio-assay protocol was used. Estrogenic / androgenic activity of some native brominated biphenyl ethers (BDEs) / chlorinated biphenyls (CBs), and their hydroxylated / methoxylated metabolites was assessed. Since data (including potency compared to reference native hormones) obtained using different protocols vary, the possibility that yeast transforms POPs into some more potent compounds was first checked; it seems that no such transformation is important from the test applicability standpoint. The developed method was sensitive with EC50 values 6.5*10^?11 M and 4.5*10^?9 M calculated for E2 and DHT, respectively. Both CBs and BDEs show weak estrogenic activity negatively correlated with the degree of their halogenation, but their metabolites are significantly more potent xenohormones. 4-OH-2,2′,4′,6′-TeCB was the most potent estrogen receptor (ER) agonist among all tested compounds; its activity was only 1,000 times lower than that of native E2.     

Nitrogen removal from wastewater and bacterial diversity in activated sludge at different COD/N ratios and dissolved oxygen concentrations

The impact of the organic carbon to nitrogen ratio (chemical oxygen demand (COD)/N) in wastewater and dissolved oxygen (DO) concentration on carbon and nitrogen removal efficiency, and total bacteria and ammonia-oxidizing bacteria (AOB) communities in activated sludge in constantly aerated sequencing batch reactors (SBRs) was determined. At DO of 0.5 and 1.5 mg O₂/L during the aeration phase, the efficiency of ammonia oxidation exceeded 90%, with nitrates as the main product. Nitrification and denitrification achieved under the same operating conditions suggested the simultaneous course of these processes. The most effective nitrogen elimination (above 50%) was obtained at the COD/N ratio of 6.8 and DO of 0.5 mg O₂/L. Total bacterial diversity was similar in all experimental series, however, for both COD/N ratios of 6.8 and 0.7, higher values were observed at DO of 0.5 mg O₂/L. The diversity and abundance of AOB were higher in the reactors with the COD/N ratio of 0.7 in comparison with the reactors with the COD/N of 6.8. For both COD/N ratios applied, the AOB population was not affected by oxygen concentration. Amplicons with sequences indicating membership of the genus Nitrosospira were the determinants of variable technological conditions.     

Further investigation of the heavy metal content of the teeth of the bank vole as an exposure indicator of environmental pollution in Poland

The content of heavy metals in mineralised dental tissues is an indicator of the exposure of their mineral phase to heavy metals during the time of tooth development and dental tissue formation. Therefore, teeth have been used as bio-indicators which accurately reflect the environmental or dietary exposure of animals and humans to heavy metals. This study follows from the earlier work in which it was demonstrated that the teeth from bank voles inhabiting various environmentally polluted and non-polluted forests in Southern Poland were reliable indicators of exposure to heavy metals. Using analytical techniques employed in the earlier study heavy metal concentrations were obtained in the teeth of bank voles trapped in 1998-2000 to determine if efforts to clean up the environment could be detected in changes in heavy metal concentrations in the teeth. The results show that these efforts are reflected in lower concentrations of heavy metals in the teeth but that cross border contamination remains a problem.     

Biosorption of Cr3+, Cd2+ and Cu2+ ions by blue-green algae Spirulina sp.: kinetics, equilibrium and the mechanism of the process

The process of biosorption of heavy metal ions (Cr3+, Cd2+, Cu2+) by blue-green algae Spirulina sp. is discussed in this paper. Spirulina sp. was found to be a very efficient biosorbent. The aim of the present study was to investigate quantitatively the potential binding sites present at the surface of Spirulina sp., using both potentiometric titrations and adsorption isotherms. The kinetic experiments showed that the process equilibrium was reached quickly, in less than 5-10 min. It was found that the equilibrium dependence between biosorption capacity and bulk metal ion concentration could be described with Langmuir equation. This suggests that the mechanism of biosorption is rather chemisorption than physical adsorption and was further confirmed by the low surface area associated with physical adsorption and by the presence of cations that appeared in the solution after biosorption. The maximum contribution of physical adsorption in the overall biosorption process was evaluated as 3.7%. It was proposed that functional groups on the cell surface contributed to the binding of metal ions by a biosorbent via equilibrium reaction. Three functional groups capable of cation exchange were identified on the cell surface. The biomass was described as weakly acidic ion exchanger. Since deprotonation of each functional group depends on pH, the process of biosorption is strongly pH-dependent. This was confirmed in the biosorption experiments carried out at different pH. The contribution of functional groups in the biosorption process was confirmed by chemical modification of the groups. Chemically blocked groups did not show neither biosorption nor ion-exchange capabilities. It has been shown that growth conditions can affect the metal adsorption properties of microalgae. The paper also discusses desorption characteristics of the biosorbent. The criteria for desorption were high elution efficiency and preservation of biosorptive properties. Desorbent that possessed these characteristics was nitric acid.     

3D printing filament as a second life of waste plastics—a review

In recent times, the issue of plastic recycling has become one of the leading issues of environmental protection and waste management. Polymer materials have been found an application in many areas of daily life and industry. Along with their extended use, the problem of plastic wastes appeared because, after withdrawal from use, they became persistent and noxious wastes. The possibility of reusing polymeric materials gives a possibility of valorization—a second life—and enables effective waste utilization to obtain consumable products. The 3D printing market is a well-growing sector. Printable filaments can be made from a variety of thermoplastic materials, including those from recycling. This paper focuses on a review of the available literature on the production of filaments for 3D printers from recycled polymers as the alternative to present approach of central selective collection of plastics. The possibility of recycling of basic thermoplastic materials and the impact of processing on their physicochemical and mechanical properties were verified (Lanzotti et al. 2019). In addition, commercially available filaments produced from recycled materials and devices which allow self-production of filaments to 3D printing from plastic waste were reviewed.