Microbial spheres: a novel cyanobacterial–diatom symbiosis

Cyanobacteria, algae and bacteria are widespread inhabitants of North Sea microbial mats. Our studies of these populations showed uncommon modes of living and extraordinary structures, which have not been described before. The structures are spherical objects covering a community of cyanobacteria, diatoms and bacteria. The cultivation of these communities in the laboratory and intensive observations of their exceptional movement has led to some spectacular findings. The sphere formations go through different phases with variation in the dominance of different microorganisms. The role of the bacteria is the most important in the first phase, and can be increased by the addition of signal substances. Spheres surrounded by envelopes of unknown composition and permeability appear, with numerous bacteria and sporadic diatoms inside. Then the cyanobacteria penetrate the spheres and arrange themselves at the surface. The communities proliferate over some weeks and are finally released. Laboratory expositions of the microbial communities to different parameters pinpoint the limits of sphere formation. The metabolic products of the sphere communities are concentrated in the spheres and lead to a different kind of compound compared with the surrounding environment. In this way, the microbial communities strongly influence the structure of the sediments. Uncommon circular structures, which develop into spheres between 0.08 and 3 mm in size were found in subcultures of non-axenic filamentous cyanobacteria enrichments from North Sea microbial mats. These filamentous cyanobacteria (Phormidium sp.) together with associated benthic diatoms of the genus Navicula and associated heterotrophic bacteria were held as reproducible synergistic cultures. Phormidium sp. filaments tightly intertwined with each other, formed the surface of the spheres, trapping diatoms inside. The formation of "spheres" was the result of radial and synchronous movements of the cyanobacteria. In old cultures, the direction of the cyanobacterial movement has turned in the opposite direction, away from the sphere. The integrity of large "spheres" was influenced by chemotactic phenomena and maintained by some type of trichome-trichome interaction. This suggests the presence of metabolic secondary products, which attract cyanobacteria and influence their movement in a form of chemotactic response.     

Copper ore post-flotation settling tanks in Poland: social acceptance or objection?

Environment, Development and Sustainability - The issues concerning mining have been causing a wide variety of emotions. Objection to and disagreement with new investments, but also social...     

Legacies,socio-economic and biophysical processes and drivers: the case of future forest cover expansion in the Polish Carpathians and Swiss Alps

Mountain forest areas are key for providing a wide range of ecosystem services and are hot spots for land use change processes, in particular, increase in forest cover at the expense of mountain pastures and meadows. Mountain forest systems in eastern and western Europe have likely similar future socio-economic situations but significantly different socio-economic history. Using a scenario-based land use modelling approach (Dyna-CLUE framework) we model three scenarios (trend, liberalisation and self-sufficiency) of future land use in the Polish Carpathians and the Swiss Alps, focussing on forest cover change. We find that forest cover increase can be expected to continue in European mountainous regions under all likely scenarios, limited only by relatively strict policy interventions. Biophysical factors, rather than socio-economic ones, are key for defining the suitability for, and therefore likely locations of future forest cover, but land use legacy plays a very important role in the spatial patterns of future forest cover, particularly in eastern Europe.

     

Sources of fine particles in the South Coast area,California

PM_2.5 (particulate matter less than 2.5 μm in aerodynamic diameter) speciation data collected between 2003 and 2005 at two United State Environmental Protection Agency (US EPA) Speciation Trends Network monitoring sites in the South Coast area, California were analyzed to identify major PM_2.5 sources as a part of the State Implementation Plan development. Eight and nine major PM_2.5 sources were identified in LA and Rubidoux, respectively, through PMF2 analyses. Similar to a previous study analyzing earlier data (Kim and Hopke, 2007a), secondary particles contributed the most to the PM_2.5 concentrations: 53% in LA and 59% in Rubidoux. The next highest contributors were diesel emissions (11%) in LA and Gasoline vehicle emissions (10%) in Rubidoux. Most of the source contributions were lower than those from the earlier study. However, the average source contributions from airborne soil, sea salt, and aged sea salt in LA and biomass smoke in Rubidoux increased.To validate the apportioned sources in this study, PMF2 results were compared with those obtained from EPA PMF (US EPA, 2005). Both models identified the same number of major sources and the resolved source profiles and contributions were similar at the two monitoring sites. The minor differences in the results caused by the differences in the least square algorithm and non-negativity constraints between two models did not affect the source identifications.     

Clogging of Filtering Material Systems Used for Disposable Respirators

The article shows the problem of clogging in connection with the parameters of filtering materials used in respiratory protective equipment. The results of investigations of airflow resistance changes during the depositing of dust inside the filtering material are presented. The configuration of layers differing in mass per unit area and the number of layers, were taken into consideration. For each configuration, the clogging abilities and the changes of airflow resistance as a reason of loading with dust were assessed. The analysis of tested materials confirms the hypothesis that there is an important coincidence between the properties of the material used in filtering equipment and the clogging coefficient. The results show that the filter should have a layered structure and that the outer layer should be made of a nonwoven of relatively high surface density.     

Aspects of Tests and Assessment of Filtering Materials Used for Respiratory Protection Against Bioaerosols. Part II: Sweat in the Environment,Microorganisms in the Form of a Bioaerosol

The second part of the article presents the results of a study of antimicrobial activity of filter nonwovens with an addition of biocides, as a function of the presence of sweat in the environment and the method of microbe deposition on a nonwoven in the form of a liquid and a bioaerosol. At the same time, the filtration efficiency of nonwovens against microorganisms in the form of a bioaerosol was tested with the dynamic method. The results showed that the addition of sweat on the surface of a nonwoven resulted in an insignificant decrease of biological activity that still remained high. Moreover, an active nonwoven showed biostatic and biocidal activity only when microbes were deposited on the surface in the form of a solution. The nonwoven did not show any biological activity after deposition of microorganisms with the dynamical method in the form of a bioaerosol.     

A Contribution to the Study of the Antidust Respirators’ Real Performance

In most industrial enterprises, hazardous factors are present in quantities exceeding permissible levels. Such a situation requires using antidust respiratory protection. It has been suggested, however, that filters for respirators are not assessed properly and that lab results might not be related to real filtering efficiency in industry. This article contains test results of some commercially available filtering half-masks, including the effect of loading with real dust, high humidity, high temperature, and a combination of loading with dust and high humidity on the half-masks’ performance. The results show that the effect of these factors is considerable and that a combination of loading with silica dust and exposing to high humidity can cause a complete loss of performance.     

The effect of the corticosteroid hormone cortexolone on the metabolites produced during phenanthrene biotransformation in Cunninghamella elegans

The metabolism of phenanthrene and the mammalian corticosteroid hormone cortexolone by the fungus Cunninghamella elegans was studied. The amounts of the cortexolone transformation products, cortisol and epicortisol, were affected by the presence of phenanthrene. Approximately 40% more cortisol was produced by C. elegans in cultures with phenanthrene. In contrast, epicortisol formation decreased. C. elegans transformed phenanthrene to phenanthrene trans-1,2-,3,4-, and 9,10-dihydrodiols, phenols, diphenols (diols) and glucoside conjugates of 1-, 2-, 3-, 4-, and 9-phenanthrols. Almost all of the phenanthrene initially added was metabolized to ethyl acetate extractable metabolites. In the mycelia and culture medium extracts, phenanthrol glucosides represented 80% and 94% of the total metabolites, respectively. The major metabolite was the glucoside conjugate of 1-phenanthrol. The presence of cortexolone affected the biodegradation of phenanthrene by decreasing the amounts of phenanthrene metabolites compared to control cultures.     

Snowpack-stored atmospheric surface-active contaminants traced with snowmelt water surface film rheology

Environmental Science and Pollution Research - The aim of the study was to quantify the adsorptive and thermo-elastic properties of snowmelt water surface films and their spatial-temporal evolution...