A superstructure model for the synthesis of single-contaminant water networks with partitioning regenerators

This paper presents a novel superstructure-based optimization model for the synthesis of industrial water networks with partitioning regenerators. Such regenerators function by splitting a contaminated water stream into a regenerated lean stream and a low-quality reject stream. Membrane separation-based processes are examples of these types of regenerators. The optimization model presented in this work integrates a single, centralized partitioning regenerator with a source–demand superstructure under the assumption that the processes within the plant are of the fixed flow rate type. The formulation is non-linear as a result of the presence of bilinear terms in the regenerator balance equations, but global optimal solutions can be found using commercial software. The features of the model are illustrated by solving case studies from the literature. It is notable from these examples that considerable design flexibility exists in networks of this type, since potentially both the lean and reject streams from the partitioning regenerator can be reused/recycled within the plant.     

Using heat to characterize streambed water flux variability in four stream reaches

Estimates of streambed water flux are needed for the interpretation of streambed chemistry and reactions. Continuous temperature and head monitoring in stream reaches within four agricultural watersheds (Leary Weber Ditch, IN; Maple Creek, NE; DR2 Drain, WA; and Merced River, CA) allowed heat to be used as a tracer to study the temporal and spatial variability of fluxes through the streambed. Synoptic methods (seepage meter and differential discharge measurements) were compared with estimates obtained by using heat as a tracer. Water flux was estimated by modeling one-dimensional vertical flow of water and heat using the model VS2DH. Flux was influenced by physical heterogeneity of the stream channel and temporal variability in stream and ground-water levels. During most of the study period (April-December 2004), flux was upward through the streambeds. At the IN, NE, and CA sites, high-stage events resulted in rapid reversal of flow direction inducing short-term surface-water flow into the streambed. During late summer at the IN site, regional ground-water levels dropped, leading to surface-water loss to ground water that resulted in drying of the ditch. Synoptic measurements of flux generally supported the model flux estimates. Water flow through the streambed was roughly an order of magnitude larger in the humid basins (IN and NE) than in the arid basins (WA and CA). Downward flux, in response to sudden high streamflows, and seasonal variability in flux was most pronounced in the humid basins and in high conductivity zones in the streambed.     

National, holistic, watershed-scale approach to understand the sources, transport, and fate of agricultural chemicals

This paper is an introduction to the following series of papers that report on in-depth investigations that have been conducted at five agricultural study areas across the United States in order to gain insights into how environmental processes and agricultural practices interact to determine the transport and fate of agricultural chemicals in the environment. These are the first study areas in an ongoing national study. The study areas were selected, based on the combination of cropping patterns and hydrologic setting, as representative of nationally important agricultural settings to form a basis for extrapolation to unstudied areas. The holistic, watershed-scale study design that involves multiple environmental compartments and that employs both field observations and simulation modeling is presented. This paper introduces the overall study design and presents an overview of the hydrology of the five study areas.     

Characterization of particulate matter for three sites in Kuwait

Many studies have shown strong associations between particulate matter (PM) levels and a variety of health outcomes, leading to changes in air quality standards in many regions, especially the United States and Europe. Kuwait, a desert country located on the Persian Gulf, has a large petroleum industry with associated industrial and urban land uses. It was marked by environmental destruction from the 1990 Iraqi invasion and subsequent oil fires. A detailed particle characterization study was conducted over 12 months in 2004-2005 at three sites simultaneously with an additional 6 months at one of the sites. Two sites were in urban areas (central and southern) and one in a remote desert location (northern). This paper reports the concentrations of particles less than 10 microm in diameter (PM10) and fine PM (PM2.5), as well as fine particle nitrate, sulfate, elemental carbon (EC), organic carbon (OC), and elements measured at the three sites. Mean annual concentrations for PM10 ranged from 66 to 93 microg/m3 across the three sites, exceeding the World Health Organization (WHO) air quality guidelines for PM10 of 20 microg/m3. The arithmetic mean PM2.5 concentrations varied from 38 and 37 microg/m3 at the central and southern sites, respectively, to 31 microg/m3 at the northern site. All sites had mean PM2.5 concentrations more than double the U.S. National Ambient Air Quality Standard (NAAQS) for PM2.5. Coarse particles comprised 50-60% of PM10. The high levels of PM10 and large fraction of coarse particles comprising PM10 are partially explained by the resuspension of dust and soil from the desert crust. However, EC, OC, and most of the elements were significantly higher at the urbanized sites, compared with the more remote northern site, indicating significant pollutant contributions from local mobile and stationary sources. The particulate levels in this study are high enough to generate substantial health impacts and present opportunities for improving public health by reducing airborne PM.     

Estimating the resuspension rate and residence time of indoor particles

Resuspension experiments were performed in a single-family residence. Resuspension by human activity was found to elevate the mass concentration of indoor particulate matter with an aerodynamic diameter less than 10 microm (PM10) an average of 2.5 times as high as the background level. As summarized from 14 experiments, the average estimated PM10 resuspension rate by a person walking on a carpeted floor was (1.4 +/- 0.6) x 10(-4) hr(-1). The estimated residence time for PM in the indoor air following resuspension was less than 2 hr for PM10 and less than 3 hr for 2-microm tracer particles. However, experimental results show that the 2-microm tracer particles stayed in the combined indoor air and surface compartments much longer (>19 days). Using a two-compartment model to simulate a regular deposition and resuspension cycle by normal human activity (e.g., walking and sitting on furniture), we estimated residence time for 2-microm conservative particulate pollutants to be more than 7 decades without vacuum cleaning, and months if vacuum cleaning was done once per week. This finding supports the observed long residence time of persistent organic pollutants in indoor environments. This study introduces a method to evaluate the particle resuspension rate from semicontinuous concentration data of particulate matter (PM). It reveals that resuspension and subsequent exfiltration does not strongly affect the overall residence time of PM pollutants when compared with surface cleaning. However, resuspension substantially increases PM concentration, and thus increases short-term inhalation exposure to indoor PM pollutants.     

PCB remediation in schools: a review

Growing awareness of polychlorinated biphenyls (PCBs) in legacy caulk and other construction materials of schools has created a need for information on best practices to control human exposures and comply with applicable regulations. A concise review of approaches and techniques for management of building-related PCBs is the focus of this paper. Engineering and administrative controls that block pathways of PCB transport, dilute concentrations of PCBs in indoor air or other exposure media, or establish uses of building space that mitigate exposure can be effective initial responses to identification of PCBs in a building. Mitigation measures also provide time for school officials to plan a longer-term remediation strategy and to secure the necessary resources. These longer-term strategies typically involve removal of caulk or other primary sources of PCBs as well as nearby masonry or other materials contaminated with PCBs by the primary sources. The costs of managing PCB-containing building materials from assessment through ultimate disposal can be substantial. Optimizing the efficacy and cost-effectiveness of remediation programs requires aligning a thorough understanding of sources and exposure pathways with the most appropriate mitigation and abatement methods.     

Managing water services in tropical regions: From land cover proxies to hydrologic fluxes

Watershed investment programs frequently use land cover as a proxy for water-based ecosystem services, an approach based on assumed relationships between land cover and hydrologic outcomes. Water flows are rarely quantified, and unanticipated results are common, suggesting land cover alone is not a reliable proxy for water services. We argue that managing key hydrologic fluxes at the site of intervention is more effective than promoting particular land-cover types. Moving beyond land cover proxies to a focus on hydrologic fluxes requires that programs (1) identify the specific water service of interest and associated hydrologic flux; (2) account for structural and ecological characteristics of the relevant land cover; and, (3) determine key mediators of the target hydrologic flux. Using examples from the tropics, we illustrate how this conceptual framework can clarify interventions with a higher probability of delivering desired water services than with land cover as a proxy.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-014-0578-8) contains supplementary material, which is available to authorized users.     

Can’t See the (Bamboo) Forest for the Trees: Examining Bamboo’s Fit Within International Forestry Institutions

Over the centuries, governments and international agencies have developed a wide range of institutions to manage timber resources and conserve values provided by treed lands. Concerns regarding the sustainable supply of timber have provided opportunities for the development of substitute resources; however, bamboo and other non-timber forest resources have not been a part of the development of these institutions. Bamboo is a unique Non-Timber Forest Product, as it is often classified as forest or timber, and therefore must adhere to the same regulations as timber. Given the recent global expansion of bamboo, it is timely to examine the interplay between bamboo and the traditional institutions of forest governance. This paper aims to contribute to debates regarding cognitive institutional constraints on the development of substitute natural resources using bamboo as a case study, with specific focus on the applicability of Forest Stewardship Council certification, timber legality verification and Reducing Emissions from Deforestation and Forest Degradation to bamboos.