Levels and tissue-dependent distribution of dioxin in Japanese domestic leafy vegetables--from the 1999 national investigation

In 1999, Japanese domestic leafy vegetables were successively investigated for levels of dioxins, including 17 dibenzo-p-dioxins/dibenzofurans (PCDD/Fs), four non-ortho co-planar PCBs (co-PCBs) and eight mono-ortho co-PCBs, all of which had been assigned toxic equivalency factors (TEFs) by WHO in 1997. The mean levels of dioxins in the edible portions were 0.07 (0.09) pg TEQ/g in spinach, 0.13 (0.14) pgTEQ/g in garland chrysanthemum, 0.01 (0.04) pg TEQ/g in mitsuba (marsh parsley) and 0.01 (0.03) pg TEQ/g in chingentsuai (Brassica Campestris var. chinesis), when non-detects were set to zero (and set to half the limit of detection). In order to understand the dioxin pollution of leafy vegetables in detail, a further investigation of dioxin levels in the tissues of spinach was conducted. As a result, the dioxin levels in the leaves were found to be higher than those in the stem and red collar, but they were much lower than those found in the primary and secondary roots, which are considerably affected by the soil, which is recognized as a sink of airborne dioxins. The dioxin levels in edible portions (leaves, stem and red collar) were obviously lower than those in non-edible portions (primary and secondary roots). In addition, from the finding that several lower-chlorinated PCDD/Fs and co-PCBs, namely 2,3,7,8-TCDD/F, 1,2,3,7,8-PeCDD, 1,2,3,7,8/2,3,4,7,8-PeCDFs, 1,2,3,7,8,9-HxCDD, 1,2,3,4,7,8-/1,2,3,6,7,8-HxCDFs, 3,3',4,4'-TCB, 2,3,3',4,4'-/2,3',4,4',5-PeCBs, and 2,3',4,4',5,5'-HxCB, were more highly represented in the dioxins in the leaves than in those in the secondary roots, it was suggested that in leafy vegetables the deposition of gaseous, presumably moderately volatile dioxins in leaf wax is another pollution pathway in addition to the adhesion of dioxin-contaminated particles including soil.     

Heavy metal removal from aqueous solution using carbonaceous K2S-impregnated adsorbent

A novel carbonaceous adsorbent for heavy metal removal was prepared from raw coal by one-step simple sulfur impregnation using K2S. Raw coal was mixed with K2S powder and then heated at 800°C for 30 min in nitrogen to produce K2S char. The sulfur content and form in K2S char were determined, and the ability of K2S char to adsorb Zn2+, Cd2+ and Pb2+ was examined. The K2S impregnation was e ective at impregnating sulfur into coal, especially in the form of elemental, thiophenic and sulfatic sulfur. The sulfur content of K2S char was higher than those of raw coal and pyrolysis char. The Zn2+ removal in 2.4 mmol/L of Zn2+ solution by K2S char was higher than raw coal with the removal rate of 100%. K2S char adsorbed Pb2+ and Cd2+ in 24 mmol/L of Pb2+ and Cd2+ solution with the removal rate of 97% and 35%, respectively. The elution extents of adsorbed Pb2+ and Cd2+ were zero in distilled water and 27% in 0.1 mol/L HCl solution. These results indicated that an e ective adsorbent for heavy metal ions was prepared from coal using K2S sulfur impregnation, and that the adsorbed metals were strongly retained in K2S char.     

Molding Method, Thermal and Mechanical Properties of Jute/PLA Injection Molding

Natural composites have been important materials system due to preservation of earth environments. Natural fibers such as jute, hemp, bagasse and so on are very good candidate of natural composites as reinforcements. On the other hand regarding matrix parts thermosetting polymer and thermoplastic polymer deriver form petrochemical products are not environmental friendly material, even if thermoplastic polymer can be recycled. In order to create fully environmental friendly material (FEFM) biodegradable polymer which can be deriver from natural resources is needed. Therefore poly(lactic acid) (PLA) polymer is very good material for the FEFM. In this paper jute fiber filled PLA resin (jute/PLA) composites was fabricated by injection moldings and mechanical properties were measured. It is believable that industries will have much attention to FEFM, so that injection molding was adopted to fabricate the composites. Long fiber pellet fabricated by pultrusion technique was adopted to prepare jute/PLA pellet. Because it is able to fabricate composite pellets with relative long length fibers for injection molding process, where, jute yarns were continuously pulled and coated with PLA resin. Here two kinds of PLA materials were used including the one with mold releasing agent and the other without it. After pass through a heated die whereby PLA resin impregnates into the jute yarns and sufficient cooling, the impregnated jute yarns were cut into pellets. Then jute/PLA pellets were fed into injection machine to make dumbbell shape specimens. In current study, the effects of temperature of PLA melting temperature i.e. impregnation temperature and the kinds of PLA were focused to get optimum molding condition. The volume fractions of jute fiber in pellet were measured by several measuring method including image analyzing, density measurement and dissolution methods. Additionally, thermal and mechanical properties were investigated. It is found that 250° is much suitable for jute/PLA long fiber pultrusion process because of its less heat degradation of jute, better impregnation, acceptable mechanical property and higher production efficiency. Additionally the jute fibers seem much effective to increase deflection temperature under load, tensile modulus and Izod strength.     

Biogeochemical model (BGC-ES) and its basin-level application for evaluating ecosystem services under forest management practices

It is important for humans to live in harmony with ecosystems. Evaluation of ecosystem services (ES) may be helpful in achieving this objective. In Japan, forest ecosystems need to be re-evaluated to prevent their degradation due to lack of forest management.In order to evaluate the effects of forest management on forest ES, we developed a process-based biogeochemical model to estimate water, carbon, and nitrogen cycles in forest ecosystems (BGC-ES). This model consists of four submodels: biomass, water cycle, carbon-nitrogen (CN) cycles, and forest management. The biomass submodel can calculate growth of forest biomass under forest managements.Several parameters of the model were calibrated using data from observations of evapotranspiration flux and quality of stream flow in forests. The model results were compared with observations of runoff water from a dam catchment site and with carbon flux observations.Our model was coupled with a basin-level GIS database of forests. Evaluations under various forest management scenarios were carried out for forests in a basin contained in the Ise Bay basin (Chubu region, Japan), where plantations (artificial forests) seemed to have degraded from poor forest management.Comparing our simulation results with those of forests without management in the basin, we found that the amounts of absorbed carbon and runoff were larger in managed forests. In addition, the volume of harvested timber was larger and its quality (diameter) was better in managed forests. Changes of ES within the various scenarios were estimated for their economic value and were compared with the cost of forest management.     

Comparison of the changes in temperatures among rural, urban and metropolitan areas around the Inland Sea in Japan

We investigated the changes in temperatures in Takamatsu, Tadotsu and Osaka areas in Japan. Data of temperatures in Takamatsu (urban area: 1942-2009), Tadotsu (rural area: 1893-2009) and Osaka (metropolitan area: 1883-2009) areas around the Inland Sea in Japan was obtained from Japan Meteorological Agency. The changes in temperatures in three areas in Japan were analyzed and compared. By using data from 1942 to 2009, various parameters of temperatures were significantly correlated with years. The changes in mean temperature in August and in a year in Takamatsu area for 50 years were highest (August: 1.6°C, Year: 1.8°C) among three areas. In addition, correlation coefficient rate between years and the number of days over the level of 34°C in August in Takamatsu area was highest (r = 0.567, p < 0.0001). Parameters of temperatures were gradually increased with years in all three areas. The heat island effect in Takamatsu area was similar to Osaka area in Japan.     

NEAR‐STREAM LANDUSE EFFECTS ON STREAMWATER NUTRIENT DISTRIBUTION IN AN URBANIZING WATERSHED1

ABSTRACT: We investigated spatial and temporal relationships among surface and subsurface watershed attributes and stream nutrient concentrations in urbanizing Johnson Creek watershed in northern Oregon. We sampled stream water at eight urban and five nonurban locations from March 1998 through December 1999. We sampled eight wells distributed over the two primary aquifers in the watershed. Using a Geographic Information System (GIS), percentages of landuse attributes within a radius of 30, 91, and 152 m from each sample site were quantified. We analyzed relationships between (1) nutrient concentrations and percentage cover of different landuse attributes, and (2) nutrient concentrations and underlying hydrologic units. We did not find a significant relationship between ground water chemistry and stream water chemistry. We found elevated levels of phosphorus (P) concentrations correlated with urban landuse, while higher nitrogen (N) concentrations were correlated with nonurban (primarily agricultural) landuse. We concluded that elevated levels of N in nonurban areas of Johnson Creek watershed were associated with agricultural practices. We further concluded that urban development factors such as increases in storm drains, dry wells, and impermeable surfaces may be responsible for higher input of P to the stream in urbanizing areas of the Johnson Creek watershed.     

Studies on photochemistry of aromatic hydrocarbons V: Photochemical reaction of chlorobenzene with nitrogen oxides in air

The investigations on the photochemical reaction of chlorobenzene with nitrogen oxides in air were carried out using the reaction vessels made of Pyrex glass and quartz, respectively. The irradiation of chlorobenzene in the Pyrex glass vessel gave m-chloronitrobenzene, 2-chloro-6-nitrophenol, 2-chloro-4-nitrophenol and 4-chloro-2-nitrophenol, while the irradiation of chlorobenzene in the quartz vessel resulted in m-chloronitrobenzene, p-nitrophenol, 2-chloro-4-nitrophenol, 3-chloro-2-nitrophenol, 3-chloro-6-nitrophenol and 3-chloro-4-nitrophenol.The formation mechanism of these chloronitrophenols was considered using the theory of the nitro-nitrite rearrangement of chloronitrobenzenes.     

Local use of agricultural lands and natural resources as the commons in Gunung Halimun National Park,West Java,Indonesia

The theory of the commons encompasses two interpretations: one based on 'manifest customs', whilst the other relates to 'latent customs'. The former asserts that individuals behave as rational economic units, pursuing their own profit based on economic mechanisms, whilst social restrictions relating to the use of resources within communities act to prevent the total destruction of the natural environment. In contrast, the latter holds that people behave according to the morality or ethics embedded within the society, and that this contributes to sustainable resource management.

A field survey conducted in West Java as part of the present study revealed that a system of communal ownership of lands and resources is widely practiced on land that is strictly private property, including paddy fields, cultivated swiddens, gardens and so forth, facilitated by the distribution of land, lending and borrowing of land and collaborative labour systems. This customary management system is considered a prime example of the commons resource management. Furthermore, communal lands were also seen to play a significant role in the distribution of land and resources amongst community members to supplement daily needs. In addition, these customary land-use systems, as the commons, are considered to contribute towards mitigating the gap between rich and poor.     

Simultaneous removal of dissolved organic matter and bromide from drinking water source by anion exchange resins for controlling disinfection by-products

Anion exchange resins （AERs） with different properties were evaluated for their ability to remove dissolved organic matter （DOM） and bromide, and to reduce disinfection by-product （DBP） formation potentials of water collected from a eutrophic surface water source in Japan. DOM and bromide were simultaneously removed by all selected AERs in batch adsorption experiments. A polyacrylic magnetic ion exchange resin （MIEX） showed faster dissolved organic carbon （DOC） removal than other AERs because it had the smallest resin bead size. Aromatic DOM fractions with molecular weight larger than 1600 Da and fluorescent organic fractions of fulvic acid- and humic acid-like compounds were efficiently removed by all AERs. Polystyrene AERs were more effective in bromide removal than polyacrylic AERs. This result implied that the properties of AERs, i.e. material and resin size, influenced not only DOM removal but also bromide removal efficiency, MIEX showed significant chlorinated DBP removal because it had the highest DOC removal within 30 rain, whereas polystyrene AERs efficiently removed brominated DBPs, especially brominated trihalomethane species. The results suggested that, depending on source water DOM and bromide concentration, selecting a suitable AER is a key factor in effective control of chlorinated and brominated DBPs in drinking water.     

Fungal levels in houses in the Fukushima Daiichi Nuclear Power Plant evacuation zone after the Great East Japan Earthquake

Residences located within 20 km of the damaged Fukushima Daiichi Nuclear Power Plant were evacuated shortly after the Great East Japan Earthquake. The levels of airborne and surface fungi were measured in six houses in the evacuation zone in August 2012 and February 2013. Airborne fungal levels in all of the houses in the summer were higher than the environmental standard levels for residential houses published in Architectural Institute of Japan (>1000 colony-forming units [CFU]/m³). In two houses whose residents rarely returned to visit, fungal levels were extremely high (>52,000 CFU/m³). Although fungal levels in the winter were much lower than those in the summer, they were still higher than environmental standard levels in several houses. Indoor fungal levels were significantly inversely related to the frequency with which residents returned, but they were not correlated with the air exchange rates, temperature, humidity, or radiation levels. Cladosporium spp. and Penicillium spp. were detected in every house. Aspergillus section Circumdati (Aspergillus ochraceus group) was also detected in several houses. These fungi produced ochratoxin A and ochratoxin B, which have nephrotoxic and carcinogenic potential. The present study suggests that further monitoring of fungal levels is necessary in houses in the Fukushima Daiichi Nuclear Power Plant evacuation zone, and that some houses may require fungal disinfection.

Implications: The results suggest that residents’ health could be at risk owing to the high levels of airborne fungi and toxic fungi Aspergillus section Circumdati. Therefore, monitoring and decontamination/disinfection of fungi are strongly recommended before residents are allowed to return permanently to their homes. In addition, returning to home with a certain frequency and adequate ventilation are necessary during similar situations, e.g., when residents cannot stay in their homes for a long period, because fungal levels in houses in the Fukushima Daiichi Nuclear Power Plant evacuation zone were inversely correlated with the frequency with which residents returned to visit their houses.