Demonstration of a high throughput on-board hydrogen generation reactor system using aluminum coil as fuel for a vehicle

A novel on-board hydrogen generation concept using Al coil with NaOH was investigated. The reaction rate was successfully controlled by introducing a pumping system for the NaOH solution. The time for the flow to develop fully was mainly dependent on the solution temperature, and the fastest start time recorded was 60 sec at a solution temperature of 70°C. The maximum H₂ generation rate was 200 L min^–1 with a prototype design of the on-board hydrogen generation system 1/8 times the size of a full-size reactor. The H₂ generation process coupled with the solution pumping system was simulated with three-dimensional fluid dynamic software, and the calculated H₂ flow and temperature rise of the system were validated with experimental data.     

Online Water Monitoring Method as a Water Security Tool: A Feasibility View

Since the tragic event on September 11, 2001 (9/11), homeland security has been the center of major attention not only in the United States but also around the world. Among homeland security agenda, more concerns on drinking water system have been drawn into the forefront attention from the public and water industry. Governmental agencies have been called upon to strongly protect the water resources from becoming a possible terror target. The online monitoring of a water system offers the potential to reduce the possible danger from a terrorist contamination as well as from unintentional chemical spills. As potential terrorist contaminants, seven chemical compounds (aldicarb, cycloheximide, dicrotophos, nicotine, sodium arsenate, sodium cyanide, and sodium fluoroacetate) were studied at different doses, in order to determine their detectability when they are present in a water system, including intake, treatment, and distribution. These contaminants were monitored by measuring simple water quality parameters such as conductivity, pH, chlorine residual, turbidity, total organic carbon (TOC), and UV254. Results indicated that the contaminants used for the study were detected at certain toxicity concentrations through the online water quality monitoring method. This method provides a useful tool for watching water resources against possible terror attacks, and also keeping safe water quality.     

An evaluation of indoor and outdoor biological particulate matter

The incidences of allergies, allergic diseases and asthma are increasing world wide. Global climate change is likely to impact plants and animals, as well as microorganisms. The World Health Organization, U.S. Environmental Protection Agency, U.S. Department of Agriculture, U.S. Department of Health and Human Services, and the Intergovernmental Panel on Climate Change cite increased allergic reactions due to climate change as a growing concern. Monitoring of indoor and ambient particulate matter (PM) and the characterization of the content for biological aerosol concentrations has not been extensively performed. Samples from urban and rural North Carolina (NC), and Denver (CO), were collected and analyzed as the goal of this research. A study of PM₁₀ (<10 μm in aerodynamic diameter) and PM_2.5 (<2.5 μm in aerodynamic diameter) fractions of ambient bioaerosols was undertaken for a six month period to evaluate the potential for long-term concentrations. These airborne bioaerosols can induce irritational, allergic, infectious, and chemical responses in exposed individuals. Three separate sites were monitored, samples were collected and analyzed for mass and biological content (endotoxins, (1,3)-β-d-glucan and protein). Concentrations of these bioaerosols were reported as a function of PM size fraction, mass and volume of air sampled. The results indicated that higher concentrations of biologicals were present in PM₁₀ than were present in PM_2.5, except when near-roadway conditions existed. This study provides the characterization of ambient bioaerosol concentrations in a variety of areas and conditions.     

The effect of operational parameters on the photocatalytic degradation of pesticide

The photocatalytic degradation of Cartap Hydrochloride, a synthetic pesticide. has been investigated over coated TiO2 photocatalysts irradiated with a ultraviolet (UV) light. The effect of operational parameters, i.e., Cartap Hydrochloride concentration, reaction time, light intensity and additive on the degradation rate of aqueous solution of Cartap Hydrochloride has been examined. Results show that the employment of efficient photocatalysts and the selection of optimal operational parameters may lead to degradation of Cartap Hydrochloride solutions.     

Catalytic wet oxidation of ammonia: why is N2 formed preferentially against NO3 -?

The role of catalyst and the reason for the preferential formation of N(2) in the catalytic oxidation reaction of ammonia in water over a Ru (3wt.%)/TiO(2) catalyst were elucidated. It was verified that the catalyst in the reaction had no direct relevance to the selective formation of N(2), but was responsible only for the oxidation of aqueous ammonia, NH(3)(aq), finally giving a molecule of nitrous acid. The preferential production of N(2) was experimentally demonstrated due to the homogeneous aqueous phase reaction of the nitrous acid-dissociated NO(2)(-) with NH(4)(+) ions. Even under the highly oxidizing condition, NO(2)(-) was much more likely to react with NH(4)(+) to form N(2) than being oxidized over the catalyst to NO(3)(-) as long as NH(4)(+) was available in solution.     

Inhalation of concentrated ambient particulate matter near a heavily trafficked road stimulates antigen-induced airway responses in mice

The goal of this study was to test the following hypotheses: (1) exposure to mobile emissions from mobile sources close to a heavily trafficked roadway will exacerbate airway inflammation and allergic airway responses in a sensitized mouse model, and (2) the magnitude of allergic airway disease responses will decrease with increasing distance from the roadway. A particle concentrator and a mobile exposure facility were used to expose ovalbumin (OVA)-sensitized BALB/c mice to purified air and concentrated fine and concentrated ultrafine ambient particles at 50 m and 150 m downwind from a roadway that was heavily impacted by emissions from heavy duty diesel-powered vehicles. After exposure, we assessed interleukin (IL)-5, IL-13, OVA-specific immunoglobulin E, OVA-specific immunoglobulin G1, and eosinophil influx as biomarkers of allergic responses and numbers of polymorphonuclear leukocytes as a marker of inflammation. The study was performed over a two-year period, and there were differences in the concentrations and compositions of ambient particulate matter across those years that could have influenced our results. However, averaged over the two-year period, exposure to concentrated ambient particles (CAPs) increased the biomarkers associated with airway allergies (IL-5, immunoglobulin E, immunoglobulin G1 and eosinophils). In addition, mice exposed to CAPs 50 m downwind of the roadway had, on the average, greater allergic responses and showed greater indications of inflammation than did mice exposed to CAPs 150 m downwind. This study is consistent with the hypothesis that exposure to CAPs close to a heavily trafficked roadway influenced allergic airway responses.     

Control of bacterial growth in water using synthesized inorganic disinfectant

Chlorine is a popular method for controlling bacterial growth in cooling towers. However, there are several drawbacks such as the difficulties in maintaining the disinfection efficacy particularly at high temperature and pH. In order to overcome these difficulties, an inorganic disinfectant based on silver and copper, which is called EEKO-BALL (commercial name), was recently developed. EEKO-BALL is made from specific ceramics and coating materials. This study was performed to evaluate the efficacy of EEKO-BALL and compare it with that of silver (Ag+) and copper (Cu2+) ions. In addition, a field study was undertaken to investigate the control of bacterial growth in several cooling tower systems. The results showed that the contact time required for inactivating 99% of E. coli was 15 min in the EEKO-BALL stock solution at 25 degrees C, pH 7.3, with 0.05 mgl(-1) Ag and 0.05 mgl(-1) Cu. EEKO-BALL was approximately four times more effective than silver and copper ions in inactivating E. coli at 25 degrees C, pH 7.3. The control of bacterial growth in the cooling towers was found to be effective, lasting more than two months after a one-time installation of the EEKO-BALL. Overall, this study suggests that EEKO-BALL can effectively work as an inorganic disinfectant for bacterial growth control.     

Next generation guided wave health monitoring for long range inspection of pipes

Shown in this paper are recent accomplishments of robust leading edge technologies in the guided wave technique and the technology transfer to the Gas and Petrochemical Industries. Focusing of guided wave beams is a key for success, compared to conventional axisymmetric excitation. Guided wave scanning and significant sensitivity enhancement are established via the newly implemented focusing scheme. In addition, using both longitudinal and torsional modes is essential to improve sensitivity and reliability in data analysis over the conventional technique based on only longitudinal or torsional. The related theoretical studies and experimental data are also presented along with field test results for confirmation.