Assessment of ozone effects on local rice cultivar by portable ozone fumigation system in Hanoi, Vietnam

This study examined the effects of troposphere ozone (O3) on rice by developing a portable ozone fumigation system and applied to the field in Hanoi, Vietnam. The system was nearly identical to the open top chamber but designed to easily and cheaply assess the O3 sensitivity of local agricultural crops in the actual field. The rice (Oryza sativa L.) was exposed to ozone during the flowering stage at peri-urban experimental site of Hanoi. The fumigation protocols covered five different levels, namely; non-filtered air (ambient) as the control treatment, 32, 62, 85 and 113 ppb in 7-h mean. It was found that observed impacts corresponded well to similar open-top chamber studies in other Asian countries. The methodology and the system left a large room for improvement and called for very careful interpretation and pre-conditions (e.g. low ambient O3 concentration). However, the portable O3 exposure in the field might open a door to the less developed countries to implement the phytotoxic risk assessment of the local agricultural species.     

Evaluating source separation of plastic waste using conjoint analysis

Using conjoint analysis, we estimated the willingness to pay (WTP) of households for source separation of plastic waste and the improvement of related environmental impacts, the residents' loss of life expectancy (LLE), the landfill capacity, and the CO(2) emissions. Unreliable respondents were identified and removed from the sample based on their answers to follow-up questions. It was found that the utility associated with reducing LLE and with the landfill capacity were both well expressed by logarithmic functions, but that residents were indifferent to the level of CO(2) emissions even though they approved of CO(2) reduction. In addition, residents derived utility from the act of separating plastic waste, irrespective of its environmental impacts; that is, they were willing to practice the separation of plastic waste at home in anticipation of its "invisible effects", such as the improvement of citizens' attitudes toward solid waste issues.     

Time-resolved measurements of aerosol elemental concentrations in indoor working environments

We have measured the elemental concentrations in aerosols with a 2-h time resolution in two different types of working environment: a chemistry laboratory dealing with the processing of advanced nanoparticulate materials and a medium-sized machine workshop. Non-stop 10-day and 12-day samplings were performed at each location in order to determine the concentration trends during the non-working/working and weekday/weekend periods. Supplementary measurements of PM10 aerosols with a 2-day sample collection time were performed with a standard Gent PM10 sampler to compare the elemental concentrations with the time-averaged concentrations detected by the 2D step-sampler. The concentrations were determined a posteriori by analyzing the x-ray spectra of aerosol samples emitted after 3-MeV proton bombardment. The PM10 samples collected in the chemistry laboratory were additionally inspected by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) to determine the chemical compositions of the individual particles. In the workshop, a total PM10 mass sampling was performed simultaneously with a minute resolution to compare the signal with typical outdoor PM10 concentration levels. A factor analysis of the time-resolved dataset points to six and eight factors in the chemistry laboratory and the machine workshop, respectively. These factors describe most of the data variance, and their composition in terms of different elements can be related to specific indoor activities and conditions. We were able to demonstrate that the elemental concentration sampling with hourly resolution is an excellent tool for studying the indoor air pollution. While sampling the total PM10 mass concentration with a minute resolution may lack the potential to identify the emission sources in a “noisy” environment, the time averaging on a day time scale is too coarse to cope with the working dynamics, even if elemental sensitivity is an option.     

Migration of C in the paddy soil-to-rice plant system after C-acetic acid breakdown by microorganisms below the plow layer

Migration of ¹⁴C derived from ¹⁴C-acetic acid was examined by using soils sampled from paddies in four administrative areas in Japan (Aomori, Yamanashi, Ehime and Okinawa) and rice plant in a tracer experiment to understand the fate of ¹⁴C in the paddy soil-to-rice plant system. The loss of ¹⁴C radioactivity levels derived from ¹⁴C-acetic acid was caused by soil microorganism breakdown. A part of the ¹⁴C fixation to soil was caused by microbial assimilation into the fatty acid fraction. ¹⁴C moved upward via two different types of ¹⁴C dynamics in soil: quick movement upward; and constant but slow movement upward. ¹⁴C was highly assimilated into the plant panicle and that was caused by the root-uptake and the transfer of ¹⁴C. Migration of ¹⁴C derived from ¹⁴C-acetic acid relied heavily upon changes of chemical forms and characteristics of ¹⁴C-compound as caused by microorganisms in soil.     

Numerical model for a watering plan to wash out organic matter from the municipal solid waste incinerator bottom ash layer in closed system disposal facilities

Bottom ash from municipal solid waste incineration (MSWI) is a main type of waste that is landfilled in Japan. The long-term elution of organic matter from the MSWI bottom ash layers is a concern because maintenance and operational costs of leachate treatment facilities are high. In closed system disposal facilities (CSDFs), which have a roof to prevent rainfall from infiltrating into the waste layers, water must be supplied artificially and its quantity can be controlled. However, the quantity of water needed and how to apply it (the intensity, period and frequency) have not been clearly defined. In order to discuss an effective watering plan, this study proposes a new washout model to clarify a fundamental mechanism of total organic carbon (TOC) elution behavior from MSWI bottom ash layers. The washout model considers three phases: solid, immobile water and mobile water. The parameters, including two mass transfer coefficients of the solid-immobile water phases and immobile-mobile water phases, were determined by one-dimensional column experiments for about 2 years. The intensity, period and frequency of watering and other factors were discussed based on a numerical analysis using the above parameters. As a result, our washout model explained adequately the elution behavior of TOC from the MSWI bottom ash layer before carbonation occurred (pH approximately 8.3). The determined parameters and numerical analysis suggested that there is a possibility that the minimum amount of water needed for washing out TOC per unit weight of MSWI bottom ash layer could be determined, which depends on the two mass transfer coefficients and the depth of the MSWI bottom ash layer. Knowledge about the fundamental mechanism of the elution behavior of TOC from the MSWI bottom ash layer before carbonation occurs, clarified by this study, will help an effective watering plan in CSDFs.     

Centralization of dairy farming facilities for improved economics and environmental quality

In Japan, most farm animal excreta has been stored directly on farmland. Runoff from this storage has often caused water pollution. Biogasification is anticipated as an important technology to manage excreta properly, but complex problems hinder its introduction. Economic aspects of management have been especially difficult for dairy farmers. For this study, structural problems regarding introduction of biogasification into dairy farming were identified. Subsequently, a desirable system of dairy farming including biogasification was suggested, and an evaluation model of the financial balance was constructed. A case study using current financial balances of several systems of dairy farming was evaluated using the constructed model and actual data. The systems were based on several policy alternatives including the suggested system mentioned above. Results show that a farmer can obtain sufficient income from a system featuring centralization of dairy housing and biogasification facilities and coordinated management by over six farmers.     

Factors affecting waste generation: a study in a waste management program in Dhaka City, Bangladesh

Information on waste generation, socioeconomic characteristics, and willingness of the households to separate waste was obtained from interviews with 402 respondents in Dhaka city. Ordinary least square regression was used to determine the dominant factors that might influence the waste generation of the households. The results showed that the waste generation of the households in Dhaka city was significantly affected by household size, income, concern about the environment, and willingness to separate the waste. These factors are necessary to effectively improve waste management, growth and performance, as well as to reduce the environmental degradation of the household waste.     

Multi-agent traffic simulations to estimate the impact of automated technologies on safety

Abstract

Objective: The objective of this article was to develop a multi-agent traffic simulation methodology to estimate the potential road safety improvements of automated vehicle technologies.

Methods: We developed a computer program that merges road infrastructure data with a large number of vehicles, drivers, and pedestrians. Human errors are induced by modeling inattention, aimless driving, insufficient safety confirmation, misjudgment, and inadequate operation. The program was applied to simulate traffic in a prescribed area in Tsukuba city. First, a 100% manual driving scenario was set to simulate traffic for a total preset vehicle travel distance. The crashes from this simulation were compared with real-world crash data from the prescribed area from 2012 to 2017. Thereafter, 4 additional scenarios of increasing levels of automation penetration (including combinations of automated emergency braking [AEB], lane departure warning [LDW], and SAE Level 4 functions) were implemented to estimate their impact on safety.

Results: Under manual driving, the system simulated a total of 859 crashes including single-car lane departure, car-to-car, and car-to-pedestrian crashes. These crashes tended to occur in locations similar to real-world crashes. The number of crashes predicted decreased to 156 cases with increasing level of automation. All of the technologies considered contributed to the decrease in crashes. Crash reductions attributable to AEB and LDW in the simulations were comparable to those reported in recent field studies. For the highest levels of automation, no assessment data were available and hence the results should be carefully treated. Further, in modeling automated functions, potentially negative aspects such as sensing failure or human overreliance were not incorporated.

Conclusions: We developed a multi-agent traffic simulation methodology to estimate the effect of different automated vehicle technologies on safety. The crash locations resulting from simulations of manual driving within a limited area in Japan were preliminary assessed by comparison with real-world crash data collected in the same area. Increasing penetration levels of AEB and LDW led to a large reduction in both the frequency and severity of rear-end crashes, followed by car-to-car head-on crashes and single-vehicle lane departure crashes. Preliminary estimations of the potential safety improvements that may be achieved with highly automated driving technologies were also obtained.