Molten carbonate fuel cells fed with biogas: Combating H2S

The use of biomass and waste to produce alternative fuels, due to environmental and energy security reasons, is a high-quality solution especially when integrated with high efficiency fuel cell applications. In this article we look into the coupling of an anaerobic digestion process of organic residues to electrochemical conversion to electricity and heat through a molten carbonate fuel cell (MCFC). In particular the pathway of the exceedingly harmful compound hydrogen sulphide (H₂S) in these phases is analysed. Hydrogen sulphide production in the biogas is strongly interrelated with methane and/or hydrogen yield, as well as with operating conditions like temperature and pH. When present in the produced biogas, this compound has multiple negative effects on the performance and durability of an MCFC. Therefore, there are important issues of integration to be solved.Three general approaches to solve the sulphur problem in the MCFC are possible. The first is to prevent the formation of hydrogen sulphide at the source: favouring conditions that inhibit its production during fermentation. Secondly, to identify the sulphur tolerance levels of the fuel cell components currently in use and develop sulphur-tolerant components that show long-term electrochemical performance and corrosion stability. The third approach is to remove the generated sulphur species to very low levels before the gas enters the fuel cell.     

Anhydrous ethanol production by extractive distillation: A solvent case study

Production of anhydrous ethanol in large scale has been made by extractive distillation using conventional solvents like ethylene-glycol. In the present paper, extractive distillation process is studied to obtain pure ethanol using ethylene-glycol and tetraethylene-glycol as solvents. Residue curve maps are used to analyse the proposed distillation processes in interpreting mixture behaviours and feasibility of distillation columns. The industrial process is simulated at steady state from residue curve map analysis. Simulation results for the ethanol/water mixture using ethylene-glycol, the conventional solvent, and tetraethylene-glycol, an alternative solvent, are presented. These results showed that the process using tetraethylene-glycol is reliable, although it requires more energy than the process with ethylene-glycol. However, ethylene-glycol has a considerable toxicity level while tetraethylene-glycol is non-toxic.     

Groundwater geochemistry diagnostics during in situ ERH remediation

In situ remediation represents a series of challenges in interpreting the monitoring data on remedial progress. Among these challenges are problems in determining the progress of the remediation and the mechanisms responsible, so that the process can be optimized. The release of organic pollutants to groundwater systems and in situ remediation technologies alter the groundwater chemistry, but outside of natural attenuation studies using inorganic chemical analyses as indicators of intrinsic biodegradation, typically little attention has been paid to the changes in inorganic groundwater chemistry. Smith (2008) noted that during an electrical resistance heating remediation that took place at a confidential site in Chicago, a two‐orders‐of‐magnitude increase in chloride concentrations occurred during the remediation. This increase in chloride resulted in a corresponding increase in calcium as a result of what is known as the common ion effect. Carbon dioxide is the gas found in highest concentrations in natural groundwater (Stumm & Morgan, 1981), and its fugacity (partial pressure) corresponds directly with calcium concentrations. Carbon dioxide at supersaturation in groundwater is capable of dissolving organic compounds, such as trichloroethene, facilitating removal of nonaqueous‐phase liquids at temperatures below the boiling point of water. One means of diagnosing these reactions is through the use of compound‐specific isotopic analysis, which is capable of distinguishing between evaporation, biodegradation, and differences in sources. The appropriate diagnosis has the potential to optimize the benefits from these reactions, lower energy costs for removal of nonaqueous‐phase liquids, and direct treatment where it is needed most. © 2010 Wiley Periodicals, Inc.     

Measurement of the pesticide methomyl by modified quartz crystal nanobalance with molecularly imprinted polymer

A simple and cost-effective analysis method based on quartz crystal nanobalance (QCN) coated with a molecularly imprinted polymer (MIP) for measurement of methomyl was investigated. In the first part of this study, a sensitive, selective and reliable quartz crystal nanobalance (QCN) sensor was designed for the selective determination of methomyl in aqueous solutions. In the second part, in order to demonstrate the applicability and performance of the fabricated sensor in the real world situation, it was successfully applied for the determination of methomyl residual in photo catalytic degradation by ZnO powders in aqueous solutions. The fabricated sensor presents a high selectivity and sensitivity (4.56 Hz per mg L^?1) for methomyl and it can be used for determination of methomyl concentration ranged between 1 to 45 mg L^?1. Furthermore, good reproducibility, R.S.D. = 2.14% (n = 5) was observed. To investigate the performance of the sensor, the change in the insecticide concentration during the photocatalytic degradation of methomyl by ZnO was investigated by QCN and UV/Vis spectroscopy. Results obtained from QCN sensor and UV/Vis spectroscopy measurement are in good mutual agreement. So the fabricated sensor may provide an efficient, low cost, easy-to-use method for the in-field evaluation of specific targeted analytes in aqueous solutions which in turn may lead to improved food and water safety.     

Photochemical Reactivities of Paraffinic Hydrocarbon-Nitrogen Oxide Mixtures Upon Addition of Propylene or Toluene

Effects associated with photochemical air pollution were measured during irradiation of n-butane-nitrogen oxide or n-butane-ethane-nitrogen oxide mixtures, with small amounts of propylene or toluene added. The effects measured including nitrogen dioxide and oxidant dosages, yields of formaldehyde and peroxy-acetyl nitrate, and eye irritation response. The results obtained clearly show that beneficial effects result from selective changes in hydrocarbon composition as well as from reduction of total hydrocarbon concenfration. Exclusion of olefins and alkylbenzenes was highly effective in reducing oxidant dosage, formaldehyde and peroxyacetyl nitrate concentrations, and eye irritation response. The only penalty was a modest increase in nitrogen dioxide dosage. A large reduction in nitrogen oxide concentration reduced nitrogen dioxide dosage and eye irritation response, but with the penalty of a large increase in oxidant dosage. The desirability of preferentially reducing olefins and alkylbenzenes rather than paraffinic hydrocarbons, acetylene, and benzene is strongly supported by this study. Research and development efforts should be directed toward preferential hydrocarbon control by mechanical or catalytic control     

Effect of water washing on the thermal behavior of rice straw

Rice straw can be used as a renewable fuel for heat and power generation. It is a viable mean of replacing fossil fuels and preventing pollution caused by open burning, especially in the areas where this residual biomass is generated. Nevertheless, the thermal conversion of rice straw can cause some operating problems such as slag formation, which negatively affects thermal conversion systems. So, the main objective of this research is studying the combustion behavior of rice straw samples collected from various regions by applying thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). In addition, the thermal behavior of ashes from rice straw was also analyzed in order to detect their melting points, and ash sintering was detected at different temperatures within the range between 550 and 1000 °C. Since washing rice straw with water could reduce the content of undesirable inorganic compounds related to the ash fusibility, samples of washed rice straw were analyzed under combustion conditions to investigate its differences regarding the thermal behavior of rice straw. The results showed that rice straw washing led to a significant improvement in its thermal behavior, since it reduced the ash contents and sintering formation.     

Black carbon aerosols in urban air in South Asia

We report data from a yearlong (2006–2007) study of black carbon concentrations ([BC]) measured at 5-min intervals with an Aethalometer in Karachi, Pakistan. Daily mean [BC] varied from about 1 to 15 μg m^?3. However, short-term spikes exceeding 40 μg m^?3 were common, occurring primarily during the morning and evening rush-hour periods. The [BC] values were highest during November through February, ～10 μg m^?3, and lowest during June through September, ～2 μg m^?3. Diurnal, seasonal, and day-of-the-week trends are discussed. It is demonstrated that these trends are strongly affected by meteorological patterns. A simple expression is applied to the concentration profiles to separate the effects of meteorological conditions and elucidate the underlying emissions patterns. Daily emissions varied from 14,000 to 22,000 kg of BC per day. When integrated over the year emissions for Karachi Proper were estimated at 6.7 kilometric tons per year and emissions for greater Karachi were 17.5 kilometric tons per year. Folding in the populations of each area yields BC emissions of 0.74 and 1.1 kg per person per year, respectively. Applying the model to previously collected data at Lahore, Pakistan yields emissions during November–January that are around a factor of two higher than those in Karachi, but because the BC measurements in Lahore covered only three months, no estimates of annual emissions were attempted. Given the large populations of these cities the local health impact from PM alone is expected to be severe but because of the high [BC] emissions the impact on the global climate may be equally significant.