Adsorption Kinetics of Dyes in Single and Binary Systems Using Cyanoguanidine-Crosslinked Chitosan of Different Deacetylation Degrees

The crosslinking of chitosan with cyanoguanidine shows some advantages, such as the improved the stability in acid solutions and the decrease of adsorbent cost. In this work, cyanoguanidine-crosslinked chitosan and pure chitosan were prepared to apply in the adsorption of Food Yellow 4 (FY4) and Food Blue 2 (FB2), in single and binary systems. Effects of pH and deacetylation degree (DD) of chitosan in adsorption were evaluated. The adsorbents were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The kinetic data were analyzed by pseudo-first order, pseudo-second order and Avrami models. The conditions of pH 3 and DD 95% were the more suitable to reach the highest adsorption capacities in all experimental assays. Under these conditions, the adsorption capacities for FY4 were approximately of 392 and 200 mg g^?1 and, for FB2 were approximately of 370 and 184 mg g^?1, respectively, in the single and binary systems. The Avrami model was suitable to represent the kinetic curves in all conditions, and the highest adsorption capacities were found for FY4 in binary aqueous system, being for the pure chitosan of 229 mg g^?1 and crosslinked chitosan of 218 mg g^?1. The Langmuir and extended Langmuir models presented a good fit to the equilibrium data in both systems. It was found that, the chitosan crosslinked with cyanoguanidine improved the chemical stability of chitosan as adsorbent.     

Sb、Ce共掺杂SnO2/C/Ti电极对含酚废水的电催化性能研究

采用溶胶-凝胶法合成Sb、Ce共掺杂SnO2/C/Ti电极,经XC-72R炭黑吸附后得到钛基炭载金属氧化物SnO2-Sb(2.5%(质量分数,下同))-Ce(2.5%)/C/Ti电极,利用电化学交流阻抗法(EIS)测试电极的交流阻抗值随电位和不同浓度苯酚的变化情况。结果表明,在不同电位(0.10、0.95、1.01V)时,SnO2-Sb(2.5%)-Ce(2.5%)/C/Ti电极的膜电阻、电化学电阻、总电阻和苯酚氧化阻力随着电位的增加而减小;此外,在恒电位(0.95V)、不同质量浓度(100、200、300mg/L)苯酚溶液的条件下,电极的膜电阻、电化学电阻、总电阻和苯酚氧化阻力随着苯酚浓度的增加而增大。电极在反应过程中表现良好的活性,对苯酚的催化氧化较彻底。     

The effects of ergonomics training on the knowledge, attitudes, and practices of teleworkers

PROBLEM: The rapid growth of teleworking has raised several social and legal issues regarding an employer's responsibility for the safety of an employee's home office. In this paper, researchers discuss the need for safety training for teleworkers and the effectiveness of a home office ergonomics training program. METHOD: Study participants (N = 50) were randomly assigned into a treatment or control group. The treatment group completed the ergonomics training and a pre- and posttest. The control group completed the pre- and posttests without training. RESULTS: The study demonstrated the need for teleworker ergonomics training. More than 85% of participants had not received teleworker training before, and 44% had experienced pain or discomfort while teleworking. Participants who completed the training significantly improved their scores on knowledge, attitude, and practices subtests. In a follow-up survey, participants indicated that they had made ergonomic changes to their offices based on the training. Several participants indicated that the pain or discomfort that they had been experiencing was eliminated or reduced as a result of the training.     

Laboratory observations on spawning,brood size and egg hatchability of the Antarctic krill Euphausia superba from Prydz Bay,Antarctica

Forty-three female Euphausia superba were collected from three sites in Prydz Bay, Antarctica in January 1985. Most gravid females took 3 to 14 d to spawn after capture and some less mature females released eggs after 21 d. Most females spawned only once; overall mean brood size was 2 809 eggs and mean hatchability for eggs from the premoult females was 69.7%. For seven females spawning a second time, overall mean brood size was 597 eggs. Mean hatchability for second-spawn eggs from five premoult females was 67.1%. Possible origins of the second-spawned eggs were small numbers of matured eggs left in the ovaries after the first spawning or eggs developed from those of peripheral nucleolus and vitellogenic stages. Throughout the 8 wk of observations, there was no apparent development of eggs in females which had released all their eggs at one spawning.     

Heavy metal sources identification and sampling uncertainty analysis in a field-scale vegetable soil of Hangzhou, China

At a field-scale (6.7 ha), 100 surface soil samples were collected from a vegetable field to determine total concentrations of Cd, Co, Cu, Hg, Mn, Ni and Zn. To identify possible sources of these metals and characterize their spatial variation, classic statistic and geostatistic techniques were applied. Through correlation and geostatistical analysis, it was found that the primary inputs of Co, Mn and Ni were due to pedogenic sources, whereas the sources of Hg and Cd were mainly due to human activities. Because of their different sources, their variations followed: Hg > Cd ≈ Cu > Zn ≈ Co ≈ Mn ≈ Ni. Based on their relationships with other soil properties, co-kriging was used to minimize sampling density. Sampling numbers for Cd, Cu, Zn, Mn, Co and Ni can be reduced from 100 to 90, 80, 70, 60, 60 and 60, respectively, without losing accuracy relative to ordinary kriging.     

Annual cycles of phytoplankton community-structure and bloom dynamics in the Neuse River Estuary, North Carolina

The spatiotemporal distributions of major phytoplankton taxa were quantified to estimate the relative contribution of different microalgal groups to biomass and bloom dynamics in the eutrophic Neuse River Estuary, North Carolina, USA. Biweekly water samples and ambient physical and chemical data were examined at sites along a salinity gradient from January 1994 through December 1996. Chemosystematic photopigments (chlorophylls and carotenoids) were identified and quantified using high-performance liquid chromatography (HPLC). A recently-developed factor-analysis procedure (CHEMTAX) was used to partition the algal group-specific chlorophyll a (chl a) concentrations based on photopigment concentrations. Results were spatially and temporally integrated to determine the ecosystem-level dynamics of phytoplankton community-constituents. Seasonal patterns of phytoplankton community-composition changes were observed over the 3 yr. Dinoflagellates reached maximum abundance in the late winter to early spring (January to March), followed by a spring diatom bloom (May to July). Cyanobacteria were more prevalent during summer months and made a large contribution to phytoplankton biomass, possibly in response to nutrient-enriched freshwater discharge. Cryptomonad blooms were not associated with a particular season, and varied from year to year. Chlorophyte abundance was low, but occasional blooms occurred during spring and summer. Over the 3 yr period, the total contribution of each algal group, in terms of chl a, was evenly balanced, with each contributing nearly 20% of the total chl a. Cryptomonad, chlorophyte, and cyanobacterial dynamics did not exhibit regular seasonal bloom patterns. High dissolved inorganic-nitrogen loading during the summer months promoted major blooms of cryptomonads, chlorophytes, and cyanobacteria. Received: 12 September 1997 / Accepted: 12 December 1997     

Filtration CharacteristicsOf Fly Ash from a Pulverized Coal-Fired Power Plant

The operating characteristics of a pilot baghouse and the filtering characteristics of fly ash filtered from the flue gas of a pulverized coal-fired power plant were studied by techniques developed in the engineering research laboratories of the National Center for Air Pollution Control in Cincinnati. The permeability of the dust cake varied with the operating conditions of the baghouse in a way that significantly affects the pressure drop and power requirements of the system.     

Estimating Full IM240 Emissions from Partial Test Results: Evidence from Arizona

ABSTRACT

The expense and inconvenience of enhanced-vehicle-emissions testing using the full 240-second dynamometer test has led states to search for ways to shorten the test process. In fact, all states that currently use the IM240 allow some type of fast-pass, usually as early in the test as second 31, and Arizona has allowed vehicles to fast-fail after second 93. While these shorter tests save states millions of dollars in inspection lanes and driver costs, there is a loss of information since test results are no longer comparable across vehicles. This paper presents a methodology for estimating full 240-second results from partial-test results for three pollutants: HC, CO, and NO_x. If states can convert all tests to consistent IM240 readings, they will be able to better characterize fleet emissions and to evaluate the impact of inspection and maintenance and other programs on emissions over time. Using a random sample of vehicles in Arizona which received full 240-second tests, we use regression analysis to estimate the relationship between emissions at second 240 and emissions at earlier seconds in the test. We examine the influence of other variables such as age, model-year group, and the pollution level itself on this relationship. We also use the estimated coefficients in several applications. First, we try to shed light on the frequent assertion that the results of the dynamometer test provide guidance for vehicle repair of failing vehicles. Using a probit analysis, we find that the probability that a failing vehicle will pass the test on the first retest is greater the longer the test has progressed. Second, we test the accuracy of our estimates for forecasting fleet emissions from partial-test emissions results in Arizona. We find forecasted fleet average emissions to be very close to the actual fleet averages for light-duty vehicles, but not quite as good for trucks, particularly when NO_x emissions are forecast.     

Pyrite-driven reactive oxygen species formation in simulated lung fluid: implications for coal workers’ pneumoconiosis

The origin of coal worker's pneumoconiosis (CWP) has been long debated. A recent epidemiological study shows a correlation between what is essentially the concentration of pyrite within coal and the prevalence of CWP in miners. Hydrogen peroxide and hydroxyl radical, both reactive oxygen species (ROS), form as byproducts of pyrite oxidative dissolution in air-saturated water. Motivated by the possible importance of ROS in the pathogenesis of CWP, we conducted an experimental study to evaluate if ROS form as byproducts in the oxidative dissolution of pyrite in simulated lung fluid (SLF) under biologically applicable conditions and to determine the persistence of pyrite in SLF. While the rate of pyrite oxidative dissolution in SLF is suppressed by 51% when compared to that in air-saturated water, the initial amount of hydrogen peroxide formed as a byproduct in SLF is nearly doubled. Hydroxyl radical is also formed in the experiments with SLF, but at lower concentrations than in the experiments with water. The formation of these ROS indicates that the reaction mechanism for pyrite oxidative dissolution in SLF is no different from that in water. The elevated hydrogen peroxide concentration in SLF suggests that the decomposition, via the Fenton mechanism to hydroxyl radical or with Fe(III) to form water and molecular oxygen, is initially inhibited by the presence of SLF components. On the basis of the oxidative dissolution rate of pyrite measured in this paper, it is calculated that a respirable two micron pyrite particle will take over 3?years to dissolve completely.