A new attachment device for deployment of monitoring equipment in estuaries and other high-energy environments

Biomonitoring is an important component of estuarine research and monitoring programs because living organisms integrate biological, chemical, and physical conditions over time. The deployment of biomonitoring devices in ecosystems that are subject to changes in water level and flow can be very challenging. This paper describes a new device, which facilitates such applications such as the deployment of periphytometers. The device is designed to encircle posts, poles, or pilings, such as channel markers common in many waterways. This device has been evaluated and approved for use by the US Coast Guard, needed for attachment to navigational aids. It allows attachment of monitoring devices requiring in situ deployment at fixed water depths in systems with dynamic water levels or velocities while minimizing the potential for shading, damage, theft, or poor long-term performance.     

A comparison of hourly with annual air pollutant emissions: Implications for estimating acute exposure and public health risk

Health risks from air pollutants are evaluated by comparing chronic (i.e., an average over 1 yr or greater) or acute (typically 1-hr) exposure estimates with chemical- and duration-specific reference values or standards. When estimating long-term pollutant concentrations via exposure modeling, facility-level annual average emission rates are readily available as model inputs for most air pollutants. In contrast, there are far fewer facility-level hour-by-hour emission rates available for many of these same pollutants. In this report, we first analyze hour-by-hour emission rates for total reduced sulfur (TRS) compounds from eight kraft pulp mill operations. This data set is used to demonstrate discrepancies between estimating exposure based on a single TRS emission rate that has been calculated as the mean of all operating hours of the year, as opposed to reported hourly emission rates. A similar analysis is then performed using reported hourly emission rates for sulfur dioxide (SO₂) and oxides of nitrogen (NO_x) from three power generating units from a U.S. power plant. Results demonstrate greater variability at kraft pulp mill operations, with ratios of reported hourly to average hourly TRS emissions ranging from less than 1 to greater than 160 during routine facility operations. Thus, if fluctuations in hourly emission rates are not accounted for, over- or underestimates of hourly exposure, and thus acute health risk, may occur. In addition to this analysis, we also demonstrate an additional challenge when assessing health risk based on hourly exposures: the lack of human health reference values based on 1-hr exposures.

Implications: Largely due to the lack of reported hourly emission rate data for many air pollutants, an hourly average emission rate (calculated from an annual emission rate) is often used when modeling the potential for acute health risk. We calculated ratios between reported hourly and hourly average emission rates from pulp and paper mills and a U.S. power plant to demonstrate that if not considered, hourly fluctuations in emissions could result in an over- or underestimation of exposure and risk. We also demonstrate the lack of 1-hr human health reference values meant to be protective of the general population, including children.     

Degradation of isoxaben in soils and an aqueous system.

The degradation of isoxaben [N-[3-(1-ethyl-1-methylpropyl)-5-isoxazolyl]-2,6-dimethoxybenzamide] was studied in soil and in an aqueous system. Soil studies were conducted in Erlenmeyer flasks (treated with 1 microg/g isoxaben) and mineralization studies in Biometer flasks (treated with 1 microg/g unlabeled and 14C-isoxaben) incubated at 23 C. Degradation in the aqueous system was performed in Erlenmeyer flasks under aerobic and anaerobic conditions incubated at 23 degrees C. Incubation mixtures were extracted at selected times and analyzed for isoxaben and degradation products by HPLC with product identification confirmed by GC-MS. After 8 weeks, 78% and 23% of the total isoxaben disappeared in nonsterile and sterile soils, respectively. After 12 weeks, approximately 1% of the labeled isoxaben was recovered as CO2 in the Biometer flask experiments; no volatile products were detected, and 5% and 33% of the total radioactivity was recovered from the nonsterile and sterile soils, respectively. In the aquatic system after 8 weeks, isoxaben had decreased from 1microg/g to 0.1 and 0.004 microg/g under aerobic and anaerobic conditions, respectively. Degradation products detected from the soil studies were 3-nitrophthalic acid and 4-methoxyphenol, and 3-nitrophthalic acid in the aqueous system studies. Microbial activity was considered to be a major factor in the degradation of isoxaben in this study.     

A SELF-VERIFYING HYBRID COMPUTER MODEL OF RIVER-BASIN HYDROLOGY1

ABSTRACT. As demands upon available water supplies increase, there is an accompanying increase in the need to assess the downstream consequences resulting from changes at specific locations within a hydrologic system. The problem is approached in this study by hybrid computer simulation of the hydrologic system. Modeling concepts are based upon the development of basic relationships which describe the various hydrologic processes. Within a system these relationships are linked by the continuity-of-mass principle. Spatial resolution is achieved by considering the modeled areas as a series of subbasins. The time increment adopted for the model is one month, so that time varying quantities are expressed in terms of mean monthly values. The model is general in nature and is applied to a particular hydrologic system through a programmed verification procedure whereby model coefficients are evaluated for the particular system. In this study the model is applied to the Bear River basin of western Wyoming, southern Idaho, and northern Utah. Comparisons between observed and computed outflow hydrographs show good agreement. The utility of the model is demonstrated by predicting the effects of various possible water resource management alternatives. The verified hybrid computer program can be digitized for application to the digital computer.     

A HYBRID COMPUTER PROGRAM FOR PREDICTING THE CHEMICAL QUALITY OF IRRIGATION RETURN FLOWS1

ABSTRACT. A hybrid computer program was developed to predict the water and salt outflow from a river basin in which irrigation is the major user of water. The model combines a chemical model which predicts the quality of water percolated through a soil profile with a general hydrologic model. The chemical model considers the reactions that occur in the soil, including the exchange of calcium, magnesium, and sodium cations on the soil complex, and the dissolution and precipitation of gypsum and lime. The chemical composition of the outflow is a function of these chemical processes within the soil, plus the blending of undiverted inflows, evaporation, transpiration, and the mixing of sub surface return flows with groundwater. The six common ions of western waters, namely calcium (Ca⁺⁺), magnesium (Mg⁺⁺), sodium (Na⁺), sulfate (SO₄⁼), chloride (Cl^?), and bicarbonate (HCO₃^?) were considered in the study. Total dissolved solids (TDS) outflow was obtained by adding the individual ions. The overall model operates on a monthly time unit. The model was tested on a portion of the Little Bear River basin in northern Utah. The model successfully simulated measured outflows of water and each of the six ions for a 24-month period. The usefulness of the model was demonstrated by a management study of the prototype system. For example, preliminary results indicated that the available water supply could be used to irrigate additional land without unduly increasing the salt outflow from the basin. With minor adjustments the model can be applied to other hydrologic areas.     

Post-remediation evaluation of a LNAPL site using electrical resistivity imaging

Present understanding of the earth's subsurface is most often derived from samples at discrete points (wells) and interpolations or models that interpret the space between these points. Electrical resistivity imaging techniques have produced an improved capability to map contaminants (especially NAPLs--NonAqueous Phase Liquids) away from traditional wells using actual field data. Electrical resistivity image data, confirmed by drilling, have demonstrated that LNAPL (Light NAPL--less dense than water, such as gasoline) contaminants exist outside of a delineated and remediated area in Golden, Oklahoma. The data also demonstrate that LNAPL exists between monitoring and remediation wells which indicate low contaminant levels when sampled. Additionally, the electrical images provided the drilling location with the highest concentration of hydrocarbon ever found on the site, even after two phases of remediation work had been performed, although the sampling protocols varied. The results indicate that current methods of post-remediation site characterization are inadequate for complete site characterization.     

Investigation into the relationship between major and minor element contents and particle size and leachability of boron in fly ash from coal fuel thermal power plants

A basic investigation of boron in discharged fly ash by coal fuel thermal power plants in several worldwide locations was carried out. Eight kinds of fly ash sample were prepared from eight coal fuel thermal power plants. Two of the fly ash samples were used to examine the relationship between the concentration of boron in fly ash and the particle size. When the particle size of fly ash is smaller, there is a possibility that it will be released into the air and spread over a wide area in the environment. However, it has become apparent that fly ash of smaller particle size has a higher concentration of boron and a higher enrichment factor. In other fly ash samples, the boron contents were examined and leaching tests were carried out. There is acidic fly ash as well as alkaline fly ash that contains larger amounts of acidic or basic salts. On alkaline fly ash, when the concentration of boron bound to Fe-Mn oxide is low; it has become apparent that leaching boron is increased in a solution with lower pH of approximately 4 which is nearly the pH of acid rain.     

Effects of soil-applied lead on seedling growth and ectomycorrhizal colonization of loblolly pine

Six-month-old loblolly pine (Pinus taeda) were grown for 15 weeks in two native soils amended with 0, 30, 60, 120, 240 or 480 mg kg(-1) Pb as PbCl2. Ectomycorrhizae were quantified, by morphotype, as the total number of tips per centimeter, and as the number of tips for each morphotype and for Cenococcum geophilum. Total numbers of non-ectomycorrhizal short roots and necrotic tips were recorded. Total height and biomass exhibited a non-linear response to soil-applied lead. Growth generally was greatest in the controls and higher treatments, and least in the intermediate treatments. In both soils, Pb concentrations in roots increased linearly with increasing levels of soil-applied Pb. Neither foliage nor stems exhibited significant increases in Pb concentrations with increasing levels of Pb. Significant linear decreases in total numbers of ectomycorrhizal tips and significant linear increases in non-ectomycorrhizal short roots and necrotic tips occurred with increasing levels of Pb in the soil. The majority of individual morphotypes decreased with increasing Pb. However, the number of ectomycorrhizal tips formed by C. geophilium increased with increasing soil Pb levels after 15 weeks of treatment. These results indicate that short-term loblolly pine seedling growth is not inhibited by increasing Pb levels. Ectomycorrhizal formation decreased, and alterations in species composition occurred as a result of increasing concentrations of soil-applied Pb. These effects on ectomycorrhizae may cause long-term changes in nutrient and water balances, which could reduce tree vigor.     

Pelvic restraint cushion sled test evaluation of pelvic forward motion

Objective: This study was designed to evaluate the performance of a pelvic restraint cushion (PRC), a submarining countermeasure that deploys under the thighs when a crash is detected in order to block the forward motion of the pelvis.

Methods: Sled tests approximating low- and high-speed frontal impacts were conducted with 4 female postmortem human subjects (PMHS) restrained by a lap and shoulder belt in the right front passenger seat. The subjects were tested with and without a PRC.

Results: The PRC is effective in reducing forward motion of the PMHS pelvis and reduces the risk of injury due to lap belt loading in a high-speed frontal crash.

Conclusions: Although small sample size limits the utility of the study's findings, the results suggest that the PRC can limit pelvic forward motion and that pelvic injury due to PRC deployment is not likely.     

Evaluation of a Statewide Matching Grant Program for the Collection of Household Hazardous Waste

Between Fall 1985 and Spring 1987, the Massachusetts Departments of Environmental Management and Environmental Quality Engineering awarded communities $490,000 in matching state grants for the collection of household hazardous waste. Funded collections resulted in the disposal of approximately 291 tons of waste at an average cost of $9 per gallon. Household participation rates ranged from 0.2 percent to 5.8 percent. An average of 10 gallons of household hazardous waste was disposed of per participating household. Total collection costs including local and state shares exceeded $900,000. Differences in participation, wastes collected and collection costs among communities were due to variations in outreach and education efforts, experience, bid specifications, wastes collected, setup costs, and collection techniques. The relative high cost per participating household and low participation rate suggest the need for alternative approaches to the management of household hazardous waste which will be explored in future grant cycles.