The aim of this work is to study the colour and chemical modifications of the surfaces in chestnut wood samples as a consequence of irradiating in a controlled environment. The changes were investigated by a new analytical approach by combining traditional techniques such as reflectance spectrophotometry in the visible range and Fourier transform infrared spectroscopy with new hyperspectral imaging, in order to obtain forecast models to describe the phenomenon. The statistical elaboration of the experimental data allowed to validate the measurements and to obtain models enabling to relate the investigated parameters; the elaboration of the hyperspectral images by chemometric methods allowed for studying the changes in the reflectance spectra. A result of great importance is the possibility to correlate the oxidation of wood chemical components with the colour change in a totally non-invasive modality. This result is particularly relevant in the field of cultural heritage and in general in the control processes of wooden materials. 相似文献
Environmental Science and Pollution Research - Particulate matter with size less than or equal to 2.5 μm (PM2.5) samples were collected from an urban site Pune, India, during April... 相似文献
Environmental Science and Pollution Research - Pollution-induced community tolerance (PICT) has been used to demonstrate effects of sediment contamination on microbes and meiofauna. Our study... 相似文献
Green algae Cladophora aegagropila, present in cooling water of thermal power plants, causes many problems and complications, especially during summer. However, algae and its metabolites are rarely eliminated by common removal methods. In this work, the elimination efficiency of electrochemically prepared potassium ferrate(VI) on algae from cooling water was investigated. The influence of experimental parameters, such as Fe(VI) dosage, application time, pH of the system, temperature and hydrodynamics of the solution on removal efficiency, was optimized. This study demonstrates that algae C. aegagropila can be effectively removed from cooling water by ferrate. Application of ferrate(VI) at the optimized dosage and under the suitable conditions (temperature, pH) leads to 100% removal of green algae Cladophora from the system. Environmentally friendly reduction products (Fe(III)) and coagulation properties favour the application of ferrate for the treatment of water contaminated with studied microorganisms compared to other methods such as chlorination and use of permanganate, where harmful products are produced.
This paper discusses the economic potential in terms of income changes that may result from conversion to low-external-input agriculture (LEIA) organic farming in a Kenya’s catchment area. A spreadsheet model applying the gross margin and net present value analysis was developed to estimate economic returns to labour and land of alternative smallholder cropping systems in the East Mau Catchment. The income and costs over a 10-year horizon associated with current cropping practices of a typical farm household cultivating 1.12 hectares of maize–bean intercrop, Irish potato, carrots, tomatoes, cabbages and kales mix were characterized based on field work conducted in 2008–2010. An “average” smallholder LEIA organic farm was simulated based on the conventional one, and its income discounted. A comparison was then made of the two farm types. Results indicate annual net present value returns to cropped land average Ksh 21,878/ha ($ 267/ha) and Kshs 22,561/ha (€ 275/ha) in 2010 values for conventional and prototype LEIA organic farming systems, respectively. Net returns are particularly sensitive to crop yields and price and cost of fertilizers and seeds. Further efforts should be made to provide an economic analysis of other LEIA organic farming practices such as composting, double digging and agroforestry in terms of additional labour costs resultant. The model can be extended to build more scenarios on the role of price premiums. Additionally, further research should be done to exploit the socio-demographic factors affecting the adoption of low-external-input systems. 相似文献
Regional Environmental Change - Increased dieback and mortality of “dark needle conifer” (DNC) stands (composed of fir (Abies sibirica), Siberian pine (Pinus sibirica) and spruce (Picea... 相似文献
Ecological footprint of mining can be used as an indicator to monitor and regulate mining operations and ensure long-term environmental sustainability. It can be viewed as a mining footprint, which is surrogate of the environmental impacts of mining. In this paper, a methodological framework is developed to demonstrate how ecological footprint can be used as an indicator of environmental degradation. Nine air quality and 26 soil quality samples are collected from the adjoining area of a mechanized coal mine, located in Raniganj coal mining belt of Burdwan district, West Bengal. Geographical information system is used for data interpolation and preparation of air and soil quality maps. The weights of different air and soil quality parameters are calculated by running principal component analysis. These derived weights are used for preparation of final composite air and soil quality maps. The composite maps show the mining footprints, expressed as land equivalent, around the active mine sites. The impact zones reveal the extent of degradation of the soil and air qualities in the areas near a mine. It is found that the impact zones, with respect to air and soil qualities, extend over areas which are 7.7 and 7.8 times the actual mining areas, that is, the area covered under mining operations, respectively. The results show the extent of degradation of air and soil qualities of the area. At different stages of mining, these footprints can be used as indicators to reveal the areas where soil and air qualities are adversely impacted. 相似文献
Currently, energy consumption for cooking in rural households of India is mostly based on fuelwood used in traditional stoves. This paper presents results of a study carried out in a forest fringe area of India on cooking energy use. The concept of calculating levelized cost as cost per unit of useful energy is applied on source–device combinations of cooking and validated in Bargaon Community Development Block of Sundergarh District in Odisha, India. About 92 % of the households in the study area use fuelwood as the only energy source for cooking; the total use of fuelwood for only cooking, in the Block is nearly 1.8 times the total sustainable wood supply showing an urgent need for promoting alternative cooking energy options. This paper also presents an assessment of different cooking options in terms of cost per unit of useful cooking energy. LPG, biogas and gasifier stoves are found to be far too expensive for the local people. Briquette-fired improved stoves appear to be a promising cooking energy option in the study area. Government support and intervention are recommended for promoting this option. 相似文献
Research across several decades has mapped the way complex environmental issues with complicated policy implications are often differentially framed within the media, public, and policy agendas with major implications for how they are understood, discussed, and decided. Building on this work, this this study compared news coverage of the debate over natural gas “fracking” in New York, Pennsylvania, and North Carolina between the period 2008 and 2013. Examining state newspapers, the analysis evaluated the types of sources used, the assertions of these sources, and how the issue of fracking was framed. From a general perspective, this study reveals how differences in framing of an environmental and scientific controversy can be attributed to the locally relevant sources used in reporting, as well as the political, economic, and social factors that might be unique to a state. Specific to the debate over natural gas “fracking,” this study adds to our understanding of how such state-based factors influence the portrayal of the issue in the news media. 相似文献
There is concern about the hazard of acute residential CO exposures from portable gasoline-powered generators, which can result in death or serious adverse health effects in exposed individuals. To address this hazard, the U.S. Consumer Product Safety Commission has developed low CO emission prototype generators by adapting off-the-shelf emission control technologies onto commercially available generators. A series of tests was conducted to characterize the indoor CO concentrations resulting from portable generators operating in the attached garage of a research house under seven different test house/garage configurations. The tested generators include both unmodified and modified low CO emission prototypes. It was found that CO concentrations varied widely, with peak house CO concentrations ranging from under 10 ppm to over 10,000 ppm. The highest concentrations in the house resulted from operation of the unmodified generator in the garage with the garage bay door closed and the house access door open. The lowest concentrations resulted from operation of a modified low CO emission prototype in the garage with the garage bay door open and the house access door closed. These tests documented reductions of up to 98% in CO concentrations due to emissions from two low CO emission portable generators compared to a stock generator.
Implications: Improper portable generator use has caused 800 U.S. deaths in the past 14 years. Generators operated in attached garages can cause CO to quickly reach deadly levels. Two low-emission prototypes generators were tested and had CO emissions reduced by up to 98%. Low-emission generators can reduce the risk of consumer poisonings and deaths. 相似文献