Impacts of microbial redox conditions on the phase distribution of pyrene in soil-water systems

Variations in the soil/sediment organic matter (SOM)-hydrophobic organic contaminant (HOC) bindings upon microbially mediated redox conditions were examined. While the extractability of pyrene associated with soil declined after its biodegradation began during aerobic incubation, its variations were almost constant (±3.0-4.4%) during anoxic/anaerobic incubations. The dissolved organic matter released from the soil incubated under highly reduced conditions became more humified and aromatic, had a higher average molecular weight, and was more polydispersed compared to that obtained from oxic incubation, similar to the SOM alterations in the early stage of diagenesis (humification). The concentrations of pyrene in the aqueous phase increased significantly during the soil incubations under highly reduced conditions due to its favorable interaction with the altered DOM. Our results suggest that the microbially mediated redox conditions have significant impacts on SOM and should be considered for the transport, fate, bioavailability, and exposure risk of HOCs in the geo-environments.     

Mercury removal from incineration flue gas by organic and inorganic adsorbents

Experiments were performed to investigate various adsorbents for their mercury removal capabilities from incineration flue gases. Four different materials were tested; Zeolite, Bentonite, activated carbon (AC), and wood char. Real incineration off-gas and in-lab simulated combustion flue gases (N2 + Hg) were used. Three cylindrical-shaped sorbent columns with 5 cm in diameter and 20 cm in length were used. The gas flow rate was fixed at 660 l/h at all times. Concentrations of NO, CO, O2, CO2, SO2, H2O, HCl, and mercury were continuously monitored. Mercury removal efficiencies of natural Zeolite and Bentonite were found to be much lower than those of the referenced AC. Amount of Hg removed were 9.2 and 7.4 microg/g of Zeolite and Bentonite, respectively. Removal efficiencies of each layer consisted of inorganic adsorbents were no higher than 7%. No significant improvement was observed with sulfur impregnation onto the inorganic adsorbents. Organic adsorbents (wood char and AC) showed much higher mercury removal efficiencies than those of inorganic ones (Zeolite and Bentonite). Mercury removal efficiency of wood char reached over 95% in the first layer, showing almost same effectiveness as AC which currently may be the most effective adsorbents for mercury. Amount of mercury captured by wood char was approximately 0.6 mg/g of wood char, close to the amount captured by AC tested in this study. Hence, wood char, made from the waste woods through a gasification process, should be considered as a possible alternative to relatively expensive AC.     

Sediment characteristics,phosphorus types and phosphorus release rates between river and lake sediments

The Han river is 469.7 km long with 26219-km2 area watershed, and is the primary drinking water source for the 20 million people that live in Seoul, Kangwon-Do and Kyunggi-Do, Korea. Phosphorus release from sediments impacts water quality, and is endangering the beneficial use of the river. This research measures phosphorus release and predicts future releases from bottom sediments of two tributary areas (Chungpyung Lake (CPL) and Jamsil submerged dam (JSD) area in the Han river). Sediment samples were taken over a 4-year period from four points in the Jamsil dam area and from 92 points in CPL. The sediments were analyzed for total phosphorus, the form of the phosphorus and release rates under different conditions to the water column. Sediment phosphorus distribution from CPL was 3-5% adsorbed-P (Ads-P), 15-20% non-apatite-P (NAI-P), 25-30% apatite-P (A-P) and 45-57% residual-P (R-P). In the JSD area, the phosphorus distribution ranges were 1-3% Ads-P, 22-39% NAI-P, 26-40% A-P and 30-39% R-P. Laboratory experiments showed that phosphorus release rates from 60 to 80 mg/m2 week in JSD area and ranged from 25 to 40 mg/m2 week in CPL sediments.     

Evaluation of PCDD/Fs characterization in animal feed and feed additives

Safety control of feed and feed additives is necessary to have safe food of animal origin. Based on media reports, nine incidents regarding dioxins and/or PCBs contaminations occurred worldwide during the last decade. Korea is a country which imports feed and feed additives. In this study, various kinds of feed and feed additives were analyzed to monitor the contamination level of dioxins. The level of PCDD/Fs in fish oil was the highest with a concentration of 23.33ngkg(-1), which is equivalent to a toxicological concentration of 4.68ngWHO-TEQ/kg. Feed from animals origin such as chicken meal, animal fat, fish meal, fish oil, and shell powder showed relatively higher concentrations of PCDD/Fs. Feed from plants origin, minerals, and additives ranged from non-detects for bit pulp and ethoxyquin to 8.28ngkg(-1) for dl-methionine. From a toxicological point of view, the highest concentration in vitamins was 0.08ngWHO-TEQ/kg among the feed additives. 2,3,4,7,8-PeCDF was the dominant congener in samples of fish oil, fish meal, and shell powder. Animal fat showed that the pattern of PCDD/Fs depends on the sources of contamination. A sample of animal fat showed 1,2,3,4,7,8-HxCDF and the other sample showed 1,2,3,4,7,8-HxCDD as a primary congener. Generally, low levels of PCDDs were detected in feed additives. Patterns of PCDD/Fs in choline chloride were different with that in choline chloride from an incident in Europe in 2000.     

Effects of activated carbon types and service life on removal of endocrine disrupting chemicals: amitrol, nonylphenol, and bisphenol-A

Removal performances of endocrine disrupting chemicals (EDC) such as amitrol, nonylphenol, and bisphenol-A were evaluated in this study using granular activated carbon (GAC) adsorption. This study found that GAC adsorption was effective in removal of EDCs with high K_ow value. Nonylphenol and bisphenol-A were effectively adsorbed onto all carbons (including the used carbons) tested in this study. As indicated by K_ow value, nonylphenol was more effectively adsorbed than bisphenol-A. The coal-based carbon was found more effective than other carbons in the adsorption of nonylphenol and bisphenol-A due to its larger pore volume. The adsorption capacity reduced with the operation year, and the extent of the reduction was different depending upon the carbon type and the operation year. Amitrol was effectively removed by biological degradation, but was poorly adsorbed. Since the microbes residing at the used carbons already accustomed to amitrol, the used carbons removed amitrol better than the virgin carbons. Although the coal-based carbon showed the best removal performance of amitrol, GAC adsorption could not be recommended for amitrol removal because considerable portion of incoming amitrol (9–87%) passed through GAC adsorption column. According to this study, pore volume mainly influenced the adsorption capacity, but the surface charge was also important due to electrical interaction. The adsorption parameters for nonylphenol and bisphenol-A provided by this study could be valuable when GAC adsorption was considered to handle an accidental spill of nonylphenol and bisphenol-A.     

Tetracycline as a selector for resistant bacteria in activated sludge

Tetracycline, one of the most widely used antibiotics, is excreted into wastewater after consumption by humans and animals. The focus of this research was to evaluate the fate of tetracycline resistant bacteria in the activated sludge process as a function of tetracycline loading. The studies were conducted with aerobic biological sequencing batch reactors (SBRs). When comparing 250 microgl(-1) tetracycline fed SBRs with parallel SBRs having a background influent wastewater tetracycline concentration of approximately 1 microgl(-1), tetracycline fed reactors were found to have increased concentrations and production rates of tetracycline resistant bacteria, higher net growth rates of resistant bacteria, and higher percentages of tetracycline resistant bacteria, which were amplified by increase in organic loading and growth rates.     

The measurement of corporate environmental performance and its application to the analysis of efficiency in oil industry

This paper addresses a measurement of corporate environmental performance, and its application to the analysis of efficiency in the petroleum firms. In order to measure firms' environmental performance, we suggest a framework called “Gscore” that consists of five categories, namely general environmental management (GEM), input, process, output, and outcome. Gscore is a proxy measure of corporate environmental performance based on voluntary environment, health, and safety (EHS) report and is calculated by aggregating the points of the above five-categories. We apply our measurement framework to the data of 39 firms' voluntary EHS reports which are available on the internet. Ten of them, on which efficiency analysis was conducted with Gscore, assets, employee, and profits, are in petroleum and refining industry. According to our results: (1) a gap is found between rhetoric and practical environmental management stemming from calculating the relation between GEM and data part in 39 EHS reports. (2) On the whole, EHS reports of petroleum firms have something in common, but there are significant differences in the type and amounts of disclosed data among the EHS reports. (3) From the results of efficiency analysis, it is found that the number of employee exerts a considerable influence on determining the relative efficiency of petroleum firms, then Gscore, profits, and assets in sequence. Furthermore, Exxon, Ashland, Phillips Petroleum, and ARCO are shown to be efficient among 10 petroleum firms.     

Pseudomosaicism for trisomy 13: Three case reports

Pseudomosaicism is of particular concern in prenatal diagnosis when it involves mosaicism for a cytogenetic abnormality associated with a clinical syndrome which is compatible with postnatal life, such as trisomies for chromosomes 13, 18, and 21. The lack of data regarding the outcome of pregnancies involving these specific kinds of pseudomosaicism makes genetic counselling difficult. Three cases of prenatal diagnosis of pseudomosaicism for trisomy 13, each of which had a normal outcome, will be presented (Tables 1 and 2). The three main areas for consideration are: (1) the genetic counselling issues, (2) the additional prenatal diagnostic options available to evaluate the status of the fetus in an attempt to identify some of the clinical features of trisomy 13, and (3) the outcome of the pregnancies.     

Temporal variability of the elemental composition in urban street dust

Urban Street dust is recognized as a source of urban air and runoff degradation. This paper takes a preliminary step toward a better understanding of temporal variability in street dust chemistry and of the controlling mechanisms. Street dust samples, collected over four seasons in the city of Hamilton, Canada, show a variability dependent on element and source-anthropogenic sources exhibiting the greatest temporal variability. In addition, elements attributed to common sources exhibit similar temporal patterns. The use of generic or even one-time samples may seriously misrepresent the elemental make-up of urban street dust. Based on the samples collected in this study, a number of questions/insights are posed to further the study of street dust temporal variability.