On-road and laboratory investigation of low-level PM emissions of a modern diesel particulate filter equipped diesel passenger car

Modern diesel particulate filter (DPF) systems are very effective in reducing particle emissions from diesel vehicles. In this work low-level particulate matter (PM) emissions from a DPF equipped EURO-4 diesel vehicle were studied in the emission test laboratory as well as during real-world chasing on a high-speed test track. Size and time resolved data obtained from an engine exhaust particle sizer (EEPS) and a condensation particle counter (CPC) are presented for both loaded and unloaded DPF condition. The corresponding time and size resolved emission factors were calculated for acceleration, deceleration, steady state driving and during DPF regeneration, and are compared with each other. In addition, the DPF efficiency of the tested vehicle was evaluated during the New European Driving Cycle (NEDC) by real time pre-/post-DPF measurements and was found to be 99.5% with respect to PM number concentration and 99.3% for PM mass, respectively. PM concentrations, which were measured at a distance of about 10 m behind the test car, ranged from 1 to 1.5 times background level when the vehicle was driven on the test track under normal acceleration conditions or at constant speeds below 100 kmh^?1. Only during higher speeds and full load accelerations concentrations above 3 times background level could be observed. The corresponding tests in the emission laboratory confirmed these results. During DPF regeneration the total PM number emission of nucleation mode particles was 3–4 orders of magnitude higher compared to those emitted at the same speed without regeneration, while the level of the accumulation mode particles remained about the same. The majority of the particles emitted during DPF regeneration was found to be volatile, and is suggested to originate from accumulated sulfur compounds.     

Vertical distribution of organochlorine pesticides in humus along Alpine altitudinal profiles in relation to ambiental parameters

In forest soils along vertical profiles located in different parts of the Alps, concentrations of persistent organic pollutants (POPs), namely organochlorine pesticides (OCPs) like dichlorodiphenyltrichloroethanes (DDTs), hexachlorobenzene (HCB), hexachlorocyclohexanes (HCH), heptachlor, aldrin, dieldrin and mirex, were measured. Though local characteristics of the sites are influenced by numerous factors like orographic and meteorological parameters, forest stand characteristics and humus parameters, we ascertained a marked vertical increase of concentrations of some organochlorine compounds in the soil. On the basis of climatological values of each site, we found that the contamination increase with altitude can be ascribed to a certain ‘cold condensation effect’. In addition, the perennial atmospheric deposition of POPs is controlled by precipitation. Other key parameters explaining the accumulation of POPs are the soil organic carbon stocks, the turnover times, the re-volatilisation and degradation processes, which vary with altitude.     

The Danube Region—On Stream with Animal Welfare Assessment in the Last 35 Years: A Review of Research on Animal Welfare Assessment in a Multi-lingual Area in Europe

This review presents first ever literature survey on historical development of farm animal welfare indicators and assessment in the Danube region. This area, encompassing European Eastern countries and the Balkans, is to a large extent heterogeneous in terms of culture and language. However, international (English) publications were disproportionally small compared to the amount of research institutions and animal welfare activities present in the region. Therefore, the authors aimed at investigating the published literature, focusing on country level and on native languages. Data were collected for the 1980–2015 period referring to scientific papers published in international and national journals, papers and abstracts in proceedings of the international and national conferences, reviews, monographs, short communications, Ph.D., Master and Graduation theses. Welfare assessment of all farm animal species was observed including fish. Over 180 papers were in line with the preselected index. Data collected showed that publishing dynamics grew rapidly towards the last decade. Most of the studies were focused on animal welfare indicators such as stress, injuries and mutilations, behaviour, body condition and management practices. Cattle, chickens, pigs and sheep were the predominant species investigated. The study revealed that experts from the region were greatly involved in the studies of animal welfare indicators and assessment, contributing to development of the currently most widely used animal welfare assessment protocols, thus having an important role in animal welfare research and protection.     

A new approach to estimate nuclide ratios from measurements with activities close to background

Measurements of low-level radioactivity often give results of the order of the detection limit. For many applications, interest is not only in estimating activity concentrations of a single radioactive isotope, but focuses on multi-isotope analyses, which often enable inference on the source of the activity detected (e.g. from activity ratios). Obviously, such conclusions become questionable if the measurement merely gives a detection limit for a specific isotope. This is particularly relevant if the presence of an isotope, which shows a low signal only (e.g. due to a short half-life or a small transition probability), is crucial for gaining the information of interest.     

How honeybees perceive communication dances,studied by means of a mechanical model

Summary A mechanical model of a dancing honeybee was used to investigate the role of various components of the wagging dance in the transfer of information to follower bees. The model simulates the dance, carries a scent, and has an acoustic near-field similar to that of live dancers. The movements of the model are controlled by a computer, and selected components of the dance can be manipulated independently of others. The number of bees approaching scented baits at various distances and directions from the hive was observed, both during simulated normal dances and dances in which different components provided potentially conflicting information about the location of the food. The results indicate that the wagging run is the master component of the dance. The figure-of-eight dance path does not seem to convey information. Both sound and wagging must be present in the dance, but no specific roles were found for these components. Both sound and wagging convey information about distance and direction, and they appear to be largely redundant. Offprint requests to: A. Michelsen     

The causes of the tremble dance of the honeybee,Apis mellifera

Tremble dances are sometimes performed by returning forager bees instead of waggle dances. Recent studies by Seeley (1992) and Kirchner (1993) have revealed that this behaviour is part of the recruitment communication system of bees. The ultimate cause of tremble dances is, according to Seeley (1992), an imbalance between the nectar intake rate and the nectar processing capacity of the colony. This imbalance is correlated with a long initial search time of returning foragers to find bees to unload them. However, it remained unclear whether a long search time is the direct proximate cause of tremble dancing. Here we report that a variety of experimental conditions can elicit tremble dances. All of them have in common that the total search time that foragers spend searching for unloaders, until they are fully unloaded, is prolonged. This finding supports and extends the hypothesis that a long search time is the proximate cause of tremble dancing. The results also confirm the previous reports of Lindauer (1948) and others about factors eliciting tremble dancing.