Nitrogen recovery in an integrated system for wastewater treatment and tilapia production

An integrated system, consisting of Up-flow Anaerobic Sludge Blanket (UASB)-duckweed-tilapia ponds was used for recovery of sewage nutrients and water recycling. A UASB reactor with 40 liter working volume was used as pre-treatment unit followed by a series of three duckweed ponds for nitrogen recovery. The treated effluent and duckweed biomass was used to feed fishponds stocked with Nile tilapia (Oreochromis niloticus). The UASB reactor was fed with raw, domestic sewage at 6 h hydraulic retention time. The three duckweed ponds were stocked with Lemna gibba and fed with UASB effluent at 15 days hydraulic retention time. Nitrogen recovery from UASB effluent via duckweed biomass represented 81% of total nitrogen removal and 46.5% from the total nitrogen input to the system. In subsequent fishponds the nitrogen recovery from duckweed as fish feed was in the range of 13.4–20%. This nitrogen in fish biomass represented 10.6–11.5 g N from the total nitrogen in the raw sewage fed to the UASB reactor. The growth performance of tilapia (Oreochromis niloticus) showed specific growth rates (SGR) in the range of 0.53–0.97. The range of feed conversion ratio (FCR) and protein efficiency ratio (PER) were 1.2–2.2 and 2.1–2.28, respectively. The results of the experiments showed total fish yield and net fish yield in the range of 17–22.8 ton/ha/y and 11.8–15.7 ton/ha/y respectively. In conclusion UASB-duckweed-tilapia ponds provide marketable by-products in the form of duckweed and fish protein, which represent a cost recovery for sewage treatment.     

Fish bioassay monitoring of waste effluents

Spills of toxic materials into bodies of water receiving industrial waste discharges can be prevented only if frequent or continuous assessments of effluent quality can be made. Currently available methods can automatically measure individual physical or chemical waste components but cannot assess toxicity caused by the interaction of components or the presence of an unsuspected material. Aquatic organisms, in contrast, respond to their total environment and in this way integrate the effects of all the various chemical and physical waste parameters.This study evaluates the possibility of using the continuously and automatically recorded responses of fish to monitor the toxicity of industrial waste effluents. A review of previously developed toxicity monitoring systems is followed by a field evaluation of a method that uses the computer-monitored ventilatory patterns of 12 bluegills (Lepomis macrochirus Rafinesque) to monitor the toxicity of an industrial waste effluent as it flows into a river. No known toxic spills occurred in the effluent during the operation of this system, but acetone added to the effluent waste caused responses from the fish at concentrations which peaked near the 96-hr LC₅₀ level. Some responses were also noted when no known toxicant was present; these were related to environmental disturbances and system design problems. Recommendations are made for the design of future biologic monitoring units.     

Mass Spectrometric Detection and Identification of Polar Pesticides and their Degradation Products - A Comparison of Different Ionization Methods

Due to increasing use of polar pesticides, they are found together with their degradation products in ground- and surface waters serving for drinking water treatment. The triazine derivatives acetamido-atrazine, ametryne, atrazine, cyanazine, deethylatrazine, deethyldeisopropyl-hydroxyatrazine, deethyl-hydroxyatrazine, deisopropyl-atrazin, deisopropyl-hydroxyatrazine, desmetryn, hydroxyatrazine, prometryne, propazine, simazine, terbumeton, terbutryne and terbutylazine, and the pesticides 2,4-D, dichlorprop, isoproturon, diuron, metolachlor, glyphosate, metsulfuronmethyl and dalapon, all of them belonging to this type of pesticides, have been studied. For determination of triazine derivatives UV detection by means of diode array detector (DAD) as well as mass spectrometric (MS) detection coupled by thermospray interface (TSP) have been used successfully after liquid chromatoraphic (LC) separation. Interfaces like thermospray (TSP), electrospray (ESP) and atmospheric pressure chemical ionisation (APCI) were examined with regard to their suitability for substance-specific detection of polar pesticides by flow injection analysis (FIA) with MS- and tandem mass spectroscopic detection (MS/MS) without preceding LC separation. Optimised detection conditions for these pesticides using FIA are presented, and solutions for occurring problems are offered.     

The stable isotope signature of methane emitted from plant material under UV irradiation

Recent experiments have shown that dry and fresh leaves, other plant matter, as well as several structural plant components, emit methane upon irradiation with UV light. Here we present the source isotope signatures of the methane emitted from a range of dry natural plant leaves and structural compounds. UV-induced methane from organic matter is strongly depleted in both ¹³C and D compared to the bulk biomass. The isotopic content of plant methoxyl groups, which have been identified as important precursors of aerobic methane formation in plants, falls roughly halfway between the bulk and CH₄ isotopic composition. C3 and C4/CAM plants show the well-established isotope difference in bulk ¹³C content. Our results show that they also emit CH₄ with different δ¹³C value. Furthermore, δ¹³C of methoxyl groups in the plant material, and ester methoxyl groups only, show a similar difference between C3 and C4/CAM plants. The correlation between the δ¹³C of emitted CH₄ and methoxyl groups implies that methoxyl groups are not the only source substrate of CH₄.Interestingly, δD values of the emitted CH₄ are also found to be different for C3 and C4 plants, although there is no significant difference in the bulk material. Bulk δD analyses may be compromised by a large reservoir of exchangeable hydrogen, but no significant δD difference is found either for the methoxyl groups, which do not contain exchangeable hydrogen. The δD difference in CH₄ between C3 and C4 plants indicates that at least two different reservoirs are involved in CH₄ emission. One of them is the OCH₃ group, the other one must be significantly depleted, and contribute more to the emissions of C3 plants compared to C4 plants. In qualitative agreement with this hypothesis, CH₄ emission rates are higher for C3 plants than for C4 plants.     

Fetal brain imaging in isolated congenital heart defects – a systematic review and meta-analysis

Congenital heart defects (CHDs) are associated with neurodevelopmental (ND) delay. This study aims to assess evidence for impaired prenatal brain development, in fetuses with CHD. A systematical search was performed, and 34 studies evaluating the fetal brain [magnetic resonance imaging (MRI) or ultrasound] in isolated CHD were included (1990–2015). Data regarding cerebral abnormalities, head circumference growth and middle cerebral artery flow were extracted. Prenatal MRI was studied in ten articles (445 fetuses), resulting in a pooled prevalence of 18% (95%CI −6%; 42%) for combined structural and acquired cerebral abnormalities. Prenatal head circumference was studied in 13 articles (753 fetuses), resulting in a pooled z-score of −0.51 (95%CI −0.84; −0.18). Doppler was studied in 21 articles (1412 fetuses), resulting in a lower middle cerebral artery pulsatility index (z-score −0.70 95%CI −0.99; −0.41) in left-sided CHD only. We conclude that prenatal MRI and ultrasound demonstrate brain abnormalities, delay in head growth and brainsparing in subgroups of CHD. However, large MRI studies are scarce, and ultrasound data are biased towards severe and left-sided CHD. Long-term follow-up studies correlating prenatal findings with postnatal ND outcome are limited, and data are lacking to support counseling families regarding ND outcome based on prenatal findings suggestive of altered brain development. © 2016 John Wiley & Sons, Ltd.