CHEMICAL ANALYSIS OF CO2 REMOVAL IN TRAY AERATORS1

ABSTRACT: This paper presents a discussion of the chemistry of CO₂ removal in tray aerators, and different sets of equations that are applicable to several initial water chemical conditions are proposed. These chemical equations and a statistical model to predict the kinetic constant were tested with field data observed by other researchers in pilot units and in a full scale plant. The water temperature in their experiments was around 15°C.     

ESTIMATION OF ENERGY REQUIREMENTS OF MORNING DEW EVAPORATION FROM LEAF SURFACES1

ABSTRACT: Evapotranspiration from vegetation is generally computed without consideration for early morning energy loss involved in drying wet leaf surfaces. In humid areas where dew formation is frequent, estimation of energy requirements for evaporating dew should be of interest. In this study, sensible heat flux (H) was computed from wind and temperature profile measurements over the study site. A leaf wetness sensor was used to measure the duration of evaporation from an exposed leaf surface, and net radiation was measured with a radiometer. The energy flux during the period of wet leaf surface evaporation was integrated over time. A cattail lysimeter situated at the site indicated the time when evapotranspiration started after wet leaves were dry. The energy requirements to dry an exposed wet leaf surface was estimated using energy balance methods. The mean value based on 44 days of observations from mid February to early May of 1993 indicates that the energy required to evaporate dew from openly exposed wet leaves was 5 percent of the total daily evapotranspiration of cattails with a coefficient of variation of 0.72. The mean time required to evaporate dew from exposed leaf surfaces from the onset of positive net radiation was 78 minutes. The mean dew evaporation in a morning from an exposed leaf surface was 0.16 mm with a maximum value of 0.41 mm. The energy required to dry wet leaves is a factor that should be considered when modeling evapotranspiration at hourly or shorter time intervals. Also, physical evapotranspiration models need to account for energy requirements for drying dew and rainfall wetted leaves.     

An ecological perspective on nanomaterial impacts in the environment

Growing concerns over the potential for unintended, adverse consequences of engineered nanoparticles (ENPs) in the environment have generated new research initiatives focused on understanding the ecological effects of ENPs. Almost nothing is currently known about the fate and transport of ENPs in environmental waters, soils, and sediments or about the biological impacts of ENPs in natural environments, and the bulk of modern nanotoxicogical research is focused on highly controlled laboratory studies with single species in simple media. In this paper, we provide an ecological perspective on the current state of knowledge regarding the likely environmental impacts of nanomaterials and propose a strategy for making rapid progress in new research in ecological nanoscience.     

Long-term coal gasification-based power with near-zero emissions. Part B: Zecomag and oxy-fuel IGCC cycles

In this second part of the work, two other long-term technologies for power generation from coal are investigated. The Zecomag plant has the same syngas production system of the Zecomix plant, described in the first part of this paper, but hydrogen-rich syngas is here burned with air in an open-cycle gas turbine. The aim is a simplification of the power island, more similar to a combined cycle; however, CO₂ capture falls from 100% to about 90% and NO_x emissions are present.An advanced oxy-fuel IGCC is the second plant investigated in this paper, presenting the same zero-emission potential of Zecomix. Syngas is produced in a high pressure, dry feed, oxygen blown gasifier and cleaned in a hot-gas-clean-up system. Clean syngas is then burned with oxygen and expanded in a turbine, using compressed recirculated CO₂ to moderate firing temperature and to cool turbine blades.The loss of net efficiency, with respect to Zecomix, is very limited (1–2 points) with both configurations. In order to better evaluate the performances obtained, a comparison with reference state-of-the art IGCCs and a long-term IGCC without CO₂ capture is also presented.     

Recovery of Sediment Characteristics in Moraine,Headwater Streams of Northern Minnesota After Forest Harvest1

Merten, Eric C., Nathaniel A. Hemstad, Randall K. Kolka, Raymond M. Newman, Elon S. Verry, and Bruce Vondracek, 2010. Recovery of Sediment Characteristics in Moraine, Headwater Streams of Northern Minnesota After Forest Harvest. Journal of the American Water Resources Association (JAWRA) 46(4): 733-743. DOI: 10.1111/j.1752-1688.2010.00445.x Abstract: We investigated the recovery of sediment characteristics in four moraine, headwater streams in north-central Minnesota after forest harvest. We examined changes in fine sediment levels from 1997 (preharvest) to 2007 (10 years postharvest) at study plots with upland clear felling and riparian thinning, using canopy cover, proportion of unstable banks, surficial fine substrates, residual pool depth, and streambed depth of refusal as response variables. Basin-scale year effects were significant (p < 0.001) for all responses when evaluated by repeated-measures ANOVAs. Throughout the study area, unstable banks increased for several years postharvest, coinciding with an increase in windthrow and fine sediment. Increased unstable banks may have been caused by forest harvest equipment, increased windthrow and exposure of rootwads, or increased discharge and bank scour. Fine sediment in the channels did not recover by summer 2007, even though canopy cover and unstable banks had returned to 1997 levels. After several storm events in fall 2007, 10 years after the initial sediment input, fine sediment was flushed from the channels and returned to 1997 levels. Although our study design did not discern the source of the initial sediment inputs (e.g., forest harvest, road crossings, other natural causes), we have shown that moraine, headwater streams can require an extended period (up to 10 years) and enabling event (e.g., high storm flows) to recover from large inputs of fine sediment.     

A simple model to assess nitrogen and phosphorus contamination in ungauged surface drainage networks: application to the Massaciuccoli Lake Catchment, Italy

Modeling is a common practice to evaluate factors affecting water quality in environmental systems impaired by point and nonpoint losses of N and P. Nevertheless, in situations with inadequate information, such as ungauged basins, a balance between model complexity and data availability is necessary. In this paper, we applied a simplified analytical model to an artificially drained floodplain in central-western Italy to evaluate the importance of different nutrient sources and in-stream retention processes and to identify critical source areas. We first considered only a set of chemical concentrations in water measured from February through May 2008 and from November 2008 through February 2009. We then broadened available data to include water discharge and hydraulic-head measurements to construct a hydrogeological model using MODFLOW-2000 and to evaluate the reliability of the simplified method. The simplified model provided acceptable estimates of discharge (ranging from 0.03-0.75 m s) and diffuse nutrient inputs from water table discharge and in-stream retention phenomena. Estimates of PO-P and total P retention (ranging from 1.0 to 0.6 μg m s and from 1.18 to 0.95 μg m s for PO-P and total P, respectively) were consistent with the range of variability in literature data. In contrast, the higher temporal variability of nitrate concentrations decreased model accuracy, suggesting the need for more intensive monitoring. The model also separated the dynamics of different reaches of the drainage network and identified zones considered critical source areas and buffer zones where pollutant transport is reduced.     

Lead astray: scale,environmental justice and the El Paso smelter

Residents in Paso del Norte (El Paso, Texas; Sunland Park, New Mexico; and Juárez, Mexico) have been concerned about heavy metal contamination in their communities since the 1970s, when high blood lead levels were found in children living in Smeltertown – a company town for the local metals smelter. After the smelter's closure in 1999, and throughout onsite and offsite cleanup efforts, residents have continued to express concerns about these contamination issues. Using a politics of scale framework and analysing ethnographic data and government, media and scientific documents, this paper identifies a set of major disjunctures between the scales of heavy metal contamination and the scales at which that contamination is regulated. These disjunctures exacerbate regional environmental injustice by complicating public participation, neglecting vulnerability and displacing hazards to new communities. Consequently, applying a politics of scale framework to this case study highlights regulatory and policy failures to address environmental justice.     

Community-Based Monitoring in support of local sustainability

Community-based monitoring (CBM) activities in Canada are increasing. A conceptual framework developed for and used to guide a pilot CBM project in 31 Canadian communities is evaluated. The framework provided the strategic direction necessary for successful implementation of the pilot and proved useful in the training of community coordinators hired for the project. Limitations of the framework include its inadequate attention to community diversity, its linearity, and insufficient expression of the adaptive and synergistic nature of its components. In order to support local sustainability, CBM appears to require an approach that is context-specific, iterative, and adaptive. Given these emergent characteristics, an enhanced conceptual framework for CBM in Canada is developed based on four dynamic themes: community mapping, participation assessment, capacity building, and information delivery.