Using Wet-FGD systems for mercury removal

A plan to control mercury emissions to the atmosphere and to establish mercury emission limits has recently been elaborated by the European Commission, making it necessary to devise an efficient and cost effective mercury removal technology. Towards this end wet flue gas desulfurization units appear as a promising option for multi-pollutant control. However, more investigation on mercury removal and a greater mercury removal efficiency are required to achieve this objective. In the present work scrubber chemistry and the application of various solid additives to enhance mercury removal in wet scrubbers is evaluated. The results obtained show a significant correlation between mercury removal efficiency and the pH of the scrubber slurry and SO2 concentration. A weaker correlation was observed between oxygen or slurry concentration and removal efficiency. Finally several solid oxides were found to be effective additives for enhancing mercury capture in wet scrubbers.     

Predator odour and its impact on male fertility and reproduction in Phodopus campbelli hamsters

 This study investigated the influence of cat urine odour in suppressing development and fertility in Campbell's hamster males. Exposure to this odour from postnatal day 11 until day 45 (sexual maturation) resulted in reduced sex organ weights, reduced testosterone levels and in an increase in abnormalities of the synaptonemal complex in both sex chromosomes and autosomes. Subsequent breeding experiments revealed a significant decrease in litter size. All these data indicate a severe effect of predator odour on the breeding success of potential prey species. It is assumed that these effects are caused by the sulphurous compounds in the urine; however, the underlying mechanisms are not yet known. Received: 31 January 2000 / Accepted in revised form: 6 June 2000     

A GPS-based system for recording the flight paths of birds

 The GPS recorder consists of a GPS receiver board, a logging facility, an antenna, a power supply, a DC-DC converter and a casing. Currently, it has a weight of 33 g. The recorder works reliably with a sampling rate of 1/s and with an operation time of about 3 h, providing time-indexed data on geographic positions and ground speed. The data are downloaded when the animal is recaptured. Prototypes were tested on homing pigeons. The records of complete flight paths with surprising details illustrate the potential of this new method that can be used on a variety of medium-sized and large vertebrates. Received: 2 February 2000 / Accepted in revised form: 17 April 2000     

Sustainability, substance flow management and time. Part I Temporal analysis of substance flows

Flows of chemical substances need to be managed in a sustainable way. Sustainable development as a whole and the sustainable management of substance flows in particular are both time issues. These include the importance of the dynamics of substance flows and the way these interconnect with the use of resources, the avoidance of environmental pollution, and their effects on health and food production. Another prerequisite for the proper management of substance flows is justice within and between generations. This requires a systematic approach and a systematic analysis of the issues as well as of the actions to be taken. One tool for such a systematic approach is temporal analysis. It brings the temporal aspects of the substances themselves and of their intended use, as well as factors affecting the stakeholders, such as decision makers, producers and consumers, into focus. In the past, timing factors were rarely taken into account. Knowledge of the temporal dynamics of substance flows and their resultant outcomes, as well as of their interaction with ecological, economic and social systems, is a basic requirement for successful substance flow management. The need to include temporal aspects into substance flow management and how to do so is outlined here. Included are not only politicians but also practitioners and scientists who must explicitly take into account adequate time scales, points in time, breaks and other forms of time in planning and acting.     

Captopril and its dimer captopril disulfide: photodegradation, aerobic biodegradation and identification of transformation products by HPLC-UV and LC-ion trap-MS(n)

In some countries effluents from hospitals and households are directly emitted into open ditches without any further treatment and with very little dilution. Under such circumstances photo- and biodegradation in the environment can occur. However, these processes do not necessarily end up with the complete mineralization of a chemical. Therefore, the biodegradability of photoproduct(s) by environmental bacteria is of interest. Cardiovascular diseases are the number one cause of death globally. Captopril (CP) is used in this study as it is widely used in Egypt and stated as one of the essential drugs in Egypt for hypertension. Three tests from the OECD series were used for biodegradation testing: Closed Bottle test (CBT; OECD 301 D), Manometric Respirometry test (MRT; OECD 301 F) and the modified Zahn-Wellens test (ZWT; OECD 302 B). Photodegradation (150 W medium-pressure Hg-lamp) of CP was studied. Also CBT was performed for captopril disulfide (CPDS) and samples received after 64 min and 512 min of photolysis. The primary elimination of CP and CPDS was monitored by LC-UV at 210 nm and structures of photoproducts were assessed by LC-UV-MS/MS (ion trap). Analysis of photodegradation samples by LC-MS/MS revealed CP sulfonic acid as the major photodegradation product of CP. No biodegradation was observed for CP, CPDS and of the mixture resulting from photo-treatment after 64 min in CBT. Partial biodegradation in the CBT and MRT was observed in samples taken after 512 min photolysis and for CP itself in MRT. Complete biodegradation and mineralization of CP occurred in the ZWT.     

Substance-related environmental monitoring

Background  Due to the requirements of the EU Water Framework Directive and other legal regulations (e.g., national laws like the German Federal Soil Protection Act), but also due to the implementation of the new EU chemicals management system REACH, environmental monitoring will gain increasing importance for the surveillance of environmental quality as well as for the assessment of chemicals. Against this background, the Work Group on ‘Environmental Monitoring’ of the Division of ‘Environmental Chemistry and Ecotoxicology’ within the German Chemical Society has compiled a position paper on substance-related environmental monitoring. Scope  Core elements of this position paper are the definitions of important terms like monitoring, exposure monitoring, effect monitoring, and integrated monitoring. Moreover, temporal and spatial aspects (monitoring of spatial distributions, trend monitoring, and retrospective monitoring) and their applications are discussed. The main focus of this position paper is the coverage of aspects which have to be observed for the preparation and implementation of a monitoring program. Essential is the clear specification of the targets of the monitoring which determine the development of the monitoring concept and its realization, e.g., if environmental media (compartments) or organisms are most appropriate as samples for the aim of the study. Of course, also the properties of the target substances are important (e.g., lipophilicity/bioaccumulation as pre-requisite for an exposure monitoring with organisms). Finally, the monitoring phases of sample planning, sampling, storage and transport of samples, selection of analytical methods, quality assurance measures as well as reporting are discussed. Perspectives  An important issue for the future is to link the quantification of chemicals in environmental compartments (exposure and pollution monitoring) more closely to the study of biological effects (effect monitoring) than has been the case up to now. Furthermore, by inclusion of a spatial differentiation, a comprehensive evaluation of the state of an ecosystem can be obtained and the relevance of the results improved. Practical examples of monitoring studies which illustrate various aspects covered in this position paper will be presented in a series of publications by members of the Work Group in the following issues of this journal.

Characterization of silver release from commercially available functional (nano)textiles

Silver, both in the nano as well as in other forms, is used in many applications including antimicrobial textiles. Washing of such textiles has already been identified as an important process that results in the release of silver into wastewater. This study thus investigated the release of silver from eight different commercially available silver-textiles during a washing and rinsing cycle. The silver released was size-fractionated and characterized using electron microscopy. In addition, the antimicrobial functionality of the textiles was tested before and after washing. Three of the textiles contained nanosized silver (labeled or confirmed by manufacturers’ information), another used a metallic silver wire and four contained silver in undeclared form. The initial silver content of the textiles was between 1.5 and 2925 mg Ag/kg. Only four of the investigated textiles leached detectable amounts of silver, of which 34-80% was in the form of particles larger than 450 nm. Microscopic analysis of the particles released in the washing solutions identified Ti/Si-AgCl nanocomposites, AgCl nanoparticles, large AgCl particles, nanosilver sulfide and metallic nano-Ag, respectively. The nanoparticles were mainly found in highly agglomerated form. The identified nanotextiles showed the highest antimicrobial activity, whereas some of the other textiles, e.g. the one with a silver wire and the one with the lowest silver content, did not reduce the growth of bacteria at all. The results show that different silver textiles release different forms of silver during washing and that among the textiles investigated AgCl was the most frequently observed chemical form in the washwater.     

Estimating pesticide runoff in small streams

Surface runoff is one of the most important pathways for pesticides to enter surface waters. Mathematical models are employed to characterize its spatio-temporal variability within landscapes, but they must be simple owing to the limited availability and low resolution of data at this scale. This study aimed to validate a simplified spatially-explicit model that is developed for the regional scale to calculate the runoff potential (RP). The RP is a generic indicator of the magnitude of pesticide inputs into streams via runoff. The underlying runoff model considers key environmental factors affecting runoff (precipitation, topography, land use, and soil characteristics), but predicts losses of a generic substance instead of any one pesticide. We predicted and evaluated RP for 20 small streams. RP input data were extracted from governmental databases. Pesticide measurements from a triennial study were used for validation. Measured pesticide concentrations were standardized by the applied mass per catchment and the water solubility of the relevant compounds. The maximum standardized concentration per site and year (runoff loss, R_Loss) provided a generalized measure of observed pesticide inputs into the streams. Average RP explained 75% (p < 0.001) of the variance in R_Loss. Our results imply that the generic indicator can give an adequate estimate of runoff inputs into small streams, wherever data of similar resolution are available. Therefore, we suggest RP for a first quick and cost-effective location of potential runoff hot spots at the landscape level.     

Anaerobic inhibition and biodegradation of antibiotics in ISO test schemes

Municipal sewage is the main exposure route for antibiotics that are used in human medical care. Antibiotics that adsorb to the primary sludge and/or sur-plus activated sludge will enter the anaerobic digesters of municipal sewage treatment plants. Here anaerobic biodegradation or inhibition of anaerobic bacteria resulting in a disturbance of the process might occur. ISO standards 13641 (2003) and 11734 (1999) were used for assessing the anaerobic inhibition of 16 and the anaerobic biodegradability of 9 antibiotics respectively. Digestion sludge from a municipal sewage treatment plant (1g/l d.s.) was used as inoculum in both tests. In ISO 13641 (2003) most antibiotics showed only moderate inhibition effects after a 7 day incubation period, with EC50 values between 24 mg/l and more than 1000 mg/l (equal to mg/g d.s.). In contrast, metronidazol was decisively toxic to anaerobic bacteria with an EC50 of 0.7 mg/l. In the anaerobic degradation tests according to ISO standard 11734 (1995), only benzylpenicillin showed certain ultimate biodegradation after 60 days and most antibiotics inhibited the digesting sludge in the respective parallel tested inhibition controls. Thus the inhibition of anaerobic bacteria by antibiotics observed in the degradation tests was higher than expected from the results of the inhibition tests. The possible explanations are that distinct substrates are used (yeast extract versus sodium benzoate), that the digestion sludge loses activity during the washing steps performed for the degradation tests and that the exposure time in the degradation tests was 8 times longer than in the inhibition test.     

Vertical profile of PCDD/Fs, dioxin-like PCBs, other PCBs, PAHs, chlorobenzenes, DDX, HCHs, organotin compounds and chlorinated ethers in dated sediment/soil cores from flood-plains of the river Elbe, Germany

Concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other organic micropollutants were determined in dated sediment/soil cores collected from the flood-plain of the river Elbe near Pevestorf (PT), approximately 125 km upstream of Hamburg, and Heuckenlock (HL) in southeast of Hamburg. Concentrations of PCDD/Fs peaked sharply at PT in the 1950s and at HL at the end of the 1940s. Cluster analyses provide evidence that the region of Bitterfeld-Wolfen (about 350-400 km upstream of Hamburg) could be the source of the PCDD/F contamination existing in the cores PT and HL since the 1940s. Obviously it is caused by sediments of the river Elbe of a similar composition. Whereas the PCDD/Fs, HCHs (hexacyclohexane isomers), DDX (DDT, DDD, DDE), and tetrachlorinated ethers in PT and HL presumably originated predominantly from the Bitterfeld-Wolfen region, organotin compounds in HL and dichlorinated haloethers in HL during the 1940s and 1950s can probably largely be attributed to emissions from the Hamburg region. Although they are separated by a large distance, in both sediment cores PT and HL concentrations and composition patterns of most organic micropollutants analyzed widely match. Inductively it can be concluded that similar contaminations will be found in many of the river bank soils between the Bitterfeld-Wolfen region and Hamburg. Excavation of top soils may uncover highly contaminated materials. Since the dated sediment cores show the variation in contaminants in the Elbe sediments over a defined time period, it is possible to make an approximate assessment of the actual degree of contamination to be expected in areas where in previous decades contaminated dredged sediments from the Elbe and from the Port of Hamburg have been deposited on land and used for building plots or for agricultural purposes.