Measurement of photosynthetic production of a marine phytoplankton population using a stable 13C isotope

The use of stable isotope of carbon, ¹³C, for the determination of the photosynthetic rate of a marine phytoplankton population was examined. Particular concern was paid to the effects of non-phytoplanktonic organic carbon and the enrichment of inorganic carbon on the estimation of the photosynthetic rate. Photosynthetic rates determined by the ¹³C method showed a remarkable agreement with those determined by the ¹⁴C method. Insitu determinations of photosynthetic rate were made in three different water types: open ocean, coastal and neritic waters, which included oligo- and mesotrophic waters, by using the ¹³C method established.     

Reductive dechlorination of non-ortho substituted polychlorinated biphenyls by ultraviolet irradiation in alkaline 2-propanol

The photodechlorination pathways of 3,3′,4,5,5′-pentachlorobiphenyl (3,3′,4,5,5′-PentaCB) and the related lower polychlorinated biphenyl congeners irradiated at 254 nm in alkaline 2-propanol were elucidated. Steric effect is the most important factor for controlling the dechlorination pattern of these substrates. Electronic effect also influences the photoreactivity of chlorine substituents.     

Inactivation of SARS-CoV-2 by Ozonated Glycerol

We evaluated the SARS-CoV-2-inactivation activity of ozonated glycerol (OG). When a viral solution with 1% fetal bovine serum (FBS) was mixed with test solutions at a ratio of 1:19 and incubated for 20 s, OG with ozone concentrations of over 1000 ppm inactivated ≥ 94.38% of the virus. Extension of the reaction time to 1 h led to the inactivation of ≥ 99.82% of the virus (the viral titer was below the detection limit). Extension to 24 h resulted in concentrations over 200 ppm OG inactivating ≥ 99.87% of the virus (the viral titers were below the detection limit). Next, viral solutions with 1, 20, and 40% FBS were mixed with test solutions at a ratio of 1:19 and incubated for 5 min. Whereas the virucidal activity of 500 ppm OG was very limited in the presence of 1% FBS (79.47% inactivation), it increased in the presence of 20 and 40% FBS (95.13 and 97.95% inactivation, respectively; the viral titers were not below the detection limit). Meanwhile, over 1000 ppm OG inactivated ≥ 99.44% of the virus regardless of the FBS concentration (the viral titers were below the detection limit). Extension of the reaction time to 1 h led to 500 ppm OG inactivating ≥ 99.91 and ≥ 99.95% of the virus with 20 and 40% FBS, respectively (the viral titers were below the detection limit). These results suggested that OG might be useful as a virucidal agent against SARS-CoV-2.

     

Influence of physical properties of ammonium nitrate on the detonation behaviour of ANFO

In order to obtain a better understanding of the non-ideal detonation behaviour of ammonium nitrate based explosives, detonation velocities of ANFO (ammonium nitrate and fuel oil) prepared with different kinds of ammonium nitrate (AN) were measured in steel tubes. In this series of test six kinds of AN were used and the influence of the pore diameter, the pore volume and the particle diameter of the AN particle on the detonation velocity of ANFO was investigated.

It was found that the pore diameter and the pore volume had a strong influence on the detonation velocities of ANFO. In the case of ANFO samples which were prepared with AN that had the same pore diameter and the pore volume, when tested the highest detonation velocity (3.85 km/s) was observed when the smallest particle diameter (<0.85 mm) was used. This value corresponded to 75% of the ideal detonation velocity, which was theoretically predicted by the CHEETAH code with the JCZ3-EOS.

The 12 months aging showed the change of the detonation velocities of ANFO and the reaction of ANFO was influenced both by the physical and the chemical properties of AN particles and oil during the storage period.     

Application of a Larval Medaka Assay to Evaluate the Fish Safety Level in Sagami River, Japan

Physico-chemical characteristics of some river and hand-dug well waters used for drinking and domestic purposes in the oil rich Niger Delta area of Nigeria were assessed using standard methods. The concentrations of the parameters in the river water samples ranged in the following order: pH (5.6–6.9), temperature (26.90–28.60°C), turbidity (23–63 NTU), electrical conductivity (52–184 μs/cm), DO (5.4–7.2 mg/l), BOD (21–57 mg/l), TDS (6.0–217 mg/l), PO₄ ³⁻ (0.19–1.72 mg/l), SO₄ ²⁻ (25–36.8 mg/l), NO₃ ⁻ (20.3–28 mg/l), Fe (6.07–15.71 mg/l), Zn (0.04–0.24 mg/l), Pb (0.01–0.17 mg/l), Ni (0.01–0.13 mg/l), Vn (0.01–0.20 mg/l) and Hg (0.001–0.002 mg/l). The concentrations of these parameters in the hand-dug well water ranged in the following order: pH (5.7–6.8) temperature (26–30°C), turbidity (134–171 NTU), electrical conductivity (160–340 μs/cm), DO (5.4–6.4 mg/l), BOD (13–34 mg/l), TDS (110–190 mg/l), PO₄ ³⁻ (0.84–1.84 mg/l), SO₄ ²⁻ (10.6–28.1 mg/l), NO₃ ⁻ (11.3–23 mg/l), Fe (13.17–16.31 mg/l), Ni (0.01–0.02 mg/l), Vn (0.01–0.04 mg/l) and Hg (0.001–0.004 mg/l). The concentrations of BOD, turbidity, NO₃ ⁻ and Fe in the water samples were above WHO and FMENV permissible limits for safe drinking water. The results suggest that the use of such waters for drinking and domestic purposes pose a serious threat to the health of the users and calls for the intervention of government agencies.     

Characterization of polychlorinated biphenyls and brominated flame retardants in surface soils from Surabaya, Indonesia

In this study, soil contamination by PCBs, PBDEs, HBCDs and two novel BFRs such as 1,2-bis-(2,4,6-tribromopenoxy) ethane (BTBPE) and decabromodiphenyl ethane (DBDPE) in various locations such as industrial, urban, rural, dumping site and agricultural areas of Surabaya, Indonesia has been characterized in order to evaluate their contamination status, profiles, potential sources, fate and behavior. Range and median concentrations of PCBs, PBDEs, HBCDs, BTBPE and DBDPE were ND - 9.6 (1.2), 0.069 - 24 (7.4), ND - 1.8 (0.48), ND - 1.7 (0.14) and ND - 7.6 (2.2) ng g⁻¹ dw, respectively. Industrial, urban and dumping areas were inventoried as the main sources of these pollutants. Decreasing gradient levels were observed for these contaminants from industrial district, urban, dumping site, rural and agricultural areas, in that order. Furthermore, organic carbon contents and proximity to the point sources were found as the major controlling factors. Contaminant profiles were characterized by the predominance of hexa-, hepta- and penta-homologues for PCBs; deca-, nona- and octa- for PBDEs and α-isomer for HBCDs. Product mixtures such as Ar1260/KC600 and Ar1254/KC500 for PCBs, deca- and octa-BDEs for PBDEs were the possible common formulations used in study area. To our knowledge, this is a first comprehensive study on characterization of soil contamination by PCBs, PBDEs and HBCDs together with two novel BFRs in a highly industrialized city located in tropical region. This study provides baseline information for establishing national monitoring programs in Indonesia.     

Degradation of the antifouling compound Irgarol 1051 by manganese peroxidase from the white rot fungus Phanerochaete chrysosporium

Irgarol 1051 (2-methylthio-4-tert-butylamino-6-cyclopropylamino-s-triazine), a derivative of s-triazine herbicide, is an antifouling compound used as an alternative to organotins. The compound is highly persistent and is known to be biodegraded only by the white rot fungus, Phanerochaete chrysosporium. We used partially purified manganese peroxidase (MnP) prepared from P. chrysosporium to evaluate its capacity to degrade Irgarol 1051. MnP degraded Irgarol 1051 to two major products, one identified as M1 (identical to GS26575, 2-methylthio-4-tert-butylamino-6-amino-s-triazine) and the other not identified but with same mass spectrum as M1 and a different ultraviolet spectrum. This report clearly demonstrates that this ligninolytic enzyme is involved in the degradation of Irgarol 1051.     

Levels of PCDDs, PCDFs and Co-PCBs in human milk in Saitama, Japan, and epidemiological research

From 1998 to 2000, the dioxin levels were measured in the milk of 299 mothers who lived in Saitama prefecture, Japan. Factors that influenced the dioxin levels were investigated based on a questionnaire given to the milk donors at that time. It was found that the dioxin levels in the milk of the mothers who smoked were lower than those of non-smokers, and the dioxin levels were generally low in the mothers who were heavy smokers. The average dioxin levels in the milk of mothers who had been breast-fed were higher than those given formula, and there was a significant difference in the dioxin congeners. It was also found that the dioxin levels in milk of the women who regularly consumed fish and shellfish were generally higher. There was a strong correlation between summation operator TEQ and PCB126. The data suggested that PCB126 could be a useful indicator for the simplified analysis of dioxin in human milk.     

Extraction and cleanup methods of dioxins in house dust from two cities in Japan using accelerated solvent extraction and a disposable multi-layer silica-gel cartridge

A simple and rapid method for the extraction and cleanup of dioxins from house dust was developed using an accelerated solvent extraction (ASE) method and a multi-layer silica-gel cartridge. It was found that the WHO-TEQ levels of dioxins extracted from the house dust obtained by both a conventional soxhlet extraction and the ASE were almost equal, when the data obtained by both methods were compared. As for the cleanup method, a multi-layer silica-gel cartridge yielded higher dioxin recoveries than the alkaline digestion method. The average values of the dioxins in house dust from Kumagaya city and Sendai city in Japan (Sendai city is bigger than Kumagaya city with respect to the population and industry), were 15.6 pg TEQ/g (8.6-26.0 pg TEQ/g, n=5, Kumagaya city) and 16.0 pg TEQ/g (5.9-30.5 pg TEQ/g, n=5, Sendai city), respectively.     

Seasonal and spatial distribution of trace elements in the water and sediments of the Tsurumi River in Japan

The Tsurumi, a class-one Japanese river, has a significant metal loading originating from urban environment. Water and sediment samples were collected from 20 sites in winter and summer, 2009 and were analyzed to determine and compare the extent of different trace element enrichment. A widely used five-step sequential extraction procedure was also employed for the fractionation of the trace elements. Concentrations of zinc, copper, lead, chromium, and cadmium were three to four times higher than that of reference values and downstream sediments are much more polluted than the upstream sites. Geochemical partitioning results suggest that the potential trace metal mobility in aquatic environment was in the order of: cadmium > zinc > lead > copper > cobalt > chromium > molybdenum > nickel. About 80.2% zinc, 77.9% molybdenum, 75.3% cobalt, 63.7% lead, 60.9% copper, 55.1% chromium, and 39.8% nickel in the sediment were contributed anthropogenically. According to intensity of pollution, Tsurumi river sediments are moderately to heavily contaminated by zinc, lead, and cobalt. Enrichment factor values demonstrated that zinc, lead, and molybdenum have minor enrichment in both the season. The pollution load index (PLI) has been used to access the pollution load of different sampling sites. The area load index and average PLI values of the river were 7.77 and 4.93 in winter and 7.72 and 4.89 in summer, respectively. If the magnitude of pollution with trace metal in the river system increases continuously, it may have a severe impact on the river’s aquatic ecology.