Biodegradability and compostability of polymers—test methods and criteria for evaluation

The treatment of solid waste in controlled composting facilities is an important possibility for reducing garbage. Natural and synthetic polymeric materials can be used for many purposes, for example, as packaging materials, where compostability is required. A prerequisite for official regulations and the decision as to which materials may be composted is investigations on their biodegradability and the quality of the compost produced. Several standardization groups at the ISO, CEN, and DIN are developing definitions, test methods, and classification systems for differentiating compostable from noncompostable materials. The concept which will be standardized and used in Germany is described in detail. It includes characterization of the test material, determination of the biodegradability using laboratory tests such as simple aquatic batch tests and a controlled aerobic composting test, investigation of the disintegration of the test material in industrial or bench-scale composting facilities, and finally, chemical and ecotoxicological analysis of the compost produced.     

Low-pressure reverse osmosis as a process for treatment of anionic pollutants in water environment

The recent development of new generation Low-Pressure Reverse Osmosis (LPRO) or nanofiltration membranes have received attraction for application in the field of wastewater and water treatment through an increasingly stringent regulation for drinking purpose and water reclamation. In this research, the application on treatment of anionic pollutants (NO₃ ^-, NO₂ ^-, Cl^-, SO₄ ^2- &; H₂PO₄ ^-) was done under very much lower pressure range of operation (0.49 to less than 0.1 MPa) than any other previous research has done. Moreover, the extended Nernst-Planck equation was used for analysis of the experimental data by considering effective charge density of the membranes.     

环境样品中痕量铅的流动注射在线分离及分光光度检测

1　IntroductionLeadiswellknownasoneofthemosttoxicmetalsandnotedinthefieldofenvironmentalchemistry[1 ] .Theleadconcentrationinnaturalwaterisextremelylow (sub μg·l-1 level)sothatsomepreconcentrationstepmustbeincludedtoassurethesensitivityofaconventionalin…     

An atmospheric dispersion model for the environmental impact assessment of thermal power plants in Japan--a method for evaluating topographical effects

An atmospheric dispersion model was developed for the environmental impact assessment of thermal power plants in Japan, and a method for evaluating topographical effects using this model was proposed. The atmospheric dispersion model consists of an airflow model with a turbulence closure model based on the algebraic Reynolds stress model and a Lagrangian particle dispersion model (LPDM). The evaluation of the maximum concentration of air pollutants such as SO2, NOx, and suspended particulate matter is usually considered of primary importance for environmental impact assessment. Three indices were therefore estimated by the atmospheric dispersion model: the ratios (alpha and beta, respectively) of the maximum concentration and the distance of the point of the maximum concentration from the source over topography to the respective values over a flat plane, and the relative concentration distribution [gamma(x)] along the ground surface projection of the plume axis normalized by the maximum concentration over a flat plane. The atmospheric dispersion model was applied to the topography around a power plant with a maximum elevation of more than 1,000 m. The values of alpha and beta evaluated by the atmospheric dispersion model varied between 1 and 3 and between 1 and 0.4, respectively, depending on the topographical features. These results and the calculated distributions of y(x) were highly similar to the results of the wind tunnel experiment. Therefore, when the slope of a hill or mountain is similar to the topography considered in this study, it is possible to evaluate topographical effects on exhaust gas dispersion with reasonable accuracy using the atmospheric dispersion model as well as wind tunnel experiments.     

Field validation of an active sampling cartridge as a passive sampler for long-term carbonyl monitoring

A carbonyl sampler originally designed for the active sampling method (Sep-Pak XPoSure) was used for long-term passive sampling, and its applicability as a passive sampler was examined through field experiments. The uptake rates of passive sampling were determined experimentally from collocated passive and active samplings for various sampling periods. The obtained uptake rates of formaldehyde, acetaldehyde, and acetone were 1.48, 1.23, and 1.08 mL/min, respectively. These uptake rates were consistent for a wide range of the sampling term (12 hr-2 weeks). Uptake rates of each carbonyl were proportional to the diffusion coefficients of each. Therefore, the ratios of diffusion coefficients were used to calculate the uptake rates of carbonyls for which the rates were not determined experimentally. Lower limits of determination were 2.16-17.5 microg/m3 for 2-week sampling. It was confirmed that 2-week monitoring of carbonyl concentrations up to 118-229 microg/m3 was possible. Relative standard deviations of the passive method generated from the repeatability test were 2-12.3% error for five samplings, and the recovery efficiencies were larger than 90%. Thus, the passive sampler was found to be highly suitable for long-term monitoring of carbonyl compounds.     

Studies on automated survey system of environmental chemicals by gas chromatography-mass spectrometry-computer II. Three dimensional mass chromatography

A three dimensional mass chromatography (TDMC), which is the extended method of mass chromatography, has been developed for the analysis of environmental chemicals. A considerable performance was suggested by the combination of TDMC to gas chromatography-mass spectrometry-computer system.     

Levels of PCDDs, PCDFs and Co-PCBs in human milk in Saitama, Japan, and epidemiological research

From 1998 to 2000, the dioxin levels were measured in the milk of 299 mothers who lived in Saitama prefecture, Japan. Factors that influenced the dioxin levels were investigated based on a questionnaire given to the milk donors at that time. It was found that the dioxin levels in the milk of the mothers who smoked were lower than those of non-smokers, and the dioxin levels were generally low in the mothers who were heavy smokers. The average dioxin levels in the milk of mothers who had been breast-fed were higher than those given formula, and there was a significant difference in the dioxin congeners. It was also found that the dioxin levels in milk of the women who regularly consumed fish and shellfish were generally higher. There was a strong correlation between summation operator TEQ and PCB126. The data suggested that PCB126 could be a useful indicator for the simplified analysis of dioxin in human milk.     

Residual organic fluorinated compounds from thermal treatment of PFOA,PFHxA and PFOS adsorbed onto granular activated carbon (GAC)

Perfluorooctanoic acid (PFOA), perfluorohexanoic acid (PFHxA) and perfluorooctane sulfonate (PFOS) adsorbed onto granular activated carbon (GAC) were thermally treated in N₂ gas stream. The purpose was to assess the fate of perfluoroalkyl and polyfluoroalkyl substances (PFASs) during thermal regeneration of GAC, which had been used for water treatment. Mineralized F, residual PFASs including short-chained species, and volatile organic fluorine (VOF) were determined. In a temperature condition of 700 °C, VOF were 13.2, 4.8, and 5.9 % as for PFOA, PFHxA, and PFOS. However, the VOF decreased to 0.1 %, if the GAC and off-gas were kept at 1000 °C. No PFASs remained in GAC at 700–1000 °C; at the same time, short-chained PFASs were slightly detected in the aqueous trapping of off-gas at 800 and 900 °C conditions. The destruction of PFASs on GAC could be perfect if the temperature is higher than 700 °C; however, the process is competitive against volatile escape from GAC. Destruction in gaseous phase needs a temperature as high as 1000 °C. Destruction of PFASs on the surface of GAC, volatile escape from the site, and thermolysis in gas phase should be considered, as to thermal regeneration of GAC.     

Determination of 1‐octanol/water partition coefficients of isocyanate compounds by an HPLC method

The octanol/water partition coefficients (P _ow) of six monoisocyanate and five diisocyanate compounds were determined by high performance liquid chromatograph (HPLC) methods. Two HPLC peaks, a broad tailed peak followed by a sharp one, were observed with all compounds. The later peak was identified as the isocyanate compound. The P _ow value for each isocyanate compound was determined by fitting the capacity factor of the peak to the regression equation drawn from those of reference compounds. The hydrophobic substituent constants for the isocyanate group were calculated with each of the compounds. The value of this constant was strongly dependent on the type of carbon bound to the isocyanate group and the average values for the aromatic and aliphatic isocyanate groups were 0.35 and — 0.52, respectively. Because of the reactivity of those compounds in the aquatic environment, the P _ow has little relevance to calculation of their environmental fate and ecotoxicity.