Age-Dependent Factors Affecting Thoracic Response: A Finite Element Study Focused on Japanese Elderly Occupants

Objectives: The ultimate goal of this research is to reduce thoracic injuries due to traffic crashes, especially in the elderly. The specific objective is to develop and validate a full-body finite element model under 2 distinct settings that account for factors relevant for thoracic fragility of elderly: one setting representative of an average size male and one representative of an average size Japanese elderly male.

Methods: A new thorax finite element model was developed from medical images of a 71-year-old average Japanese male elderly size (161cm, 60 kg) postmortem human subject (PMHS). The model was validated at component and assembled levels against original series of published test data obtained from the same elderly specimen. The model was completed with extremities and head of a model previously developed. The rib cage and the thoracic flesh materials were assigned age-dependent properties and the model geometry was scaled up to simulate a 50th percentile male. Thereafter, the model was validated against existing biomechanical data for younger and elderly subjects, including hub-to-thorax impacts and frontal impact sled PMHS test data. Finally, a parametric study was conducted with the new models to understand the effect of size and aging factors on thoracic response and risk of rib fractures.

Results: The model behaved in agreement with tabletop test experiments in intact, denuded, and eviscerated tissue conditions. In frontal impact sled conditions, the model showed good 3-dimensional head and spine kinematics, as well as rib cage multipoint deflections. When properties representative of an aging person were simulated, both the rib cage deformation and the predicted number of rib fractures increased. The effects of age factors such as rib cortical thickness, mechanical properties, and failure thresholds on the model responses were consistent with the literature. Aged and thereby softened flesh reduced load transfer between ribs; the coupling of the rib cage was reduced. Aged costal cartilage increased the severity of the diagonal belt loading sustained by the lower loaded rib cage.

Conclusions: When age-specific parameters were implemented in a finite element (FE) model of the thorax, the rib cage kinematics and thorax injury risk increased. When the effect of size was isolated, 2 factors, in addition to rib material properties, were found to be important: flesh and costal cartilage properties. These 2 were identified to affect rib cage deformation mechanisms and may potentially increase the risk of rib fractures.     

Behavior of PCNs, PCDDs, PCDFs, and dioxin-like PCBs in the thermal destruction of wastes containing PCNs

In the first known study to characterize the emissions of polychlorinated naphthalenes (PCNs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (dl-PCBs) from the thermal treatment of wastes containing PCNs, the formation and decomposition behavior of these pollutants was investigated both at laboratory scale and at plant scale. Exhaust gas measurements from laboratory-scale combustion of rubber belts containing PCNs (FB belts) were used as the basis for calculations predicting that the incremental dioxin toxic equivalency (TEQ) emissions from municipal solid waste (MSW) incinerators would be less than 0.1 ng/m3 N. In order to directly examine co-incineration of FB belts with MSW and to address potential differences between the laboratory experiment and full-scale MSW incinerators, experiments were conducted using a larger scale thermal treatment test facility with sampling and analysis at several points in the thermal treatment process. Congener specific analysis of PCNs clearly showed that both destruction and synthesis simultaneously occurred during combustion in the kiln. Most of the PCNs were destroyed by secondary combustion, and almost all PCNs were removed after flue gas treatment. Almost all PCDDs/DFs were synthesized as by-products of kiln combustion, most of them were destroyed by the secondary combustion, and almost all dioxins (PCDDs/DFs and dl-PCBs) were removed after flue gas treatment. The TEQ emission levels were less than 0.1 ng/m3 N for all plant-scale tests, and differences in TEQ emission levels were very small. Adding wastes containing PCNs to MSW will not influence thermal treatment emissions to the environment from modern solid waste incinerators.     

Effects of dietary habits and CYP1A1 polymorphisms on blood dioxin concentrations in Japanese men

The major source of dioxin impurities in Japan in the past was agrochemical formulations; more recently, it has been exhaust from waste incinerators. To examine the environmental and genetic factors that influence blood dioxin concentration, we investigated the relationship among dioxin concentrations, dietary habits and cytochorome P450 1A1 (CYP1A1) polymorphisms (MspI type and Ile-Val type) in Japanese fishermen and farmers, including also a group of office workers as controls. The mean dioxin concentrations in the fishermen, the farmers and the controls were 161369, 79079 and 100500 pg/g fat, respectively. The elevated dioxin concentration with polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar-PCBs found in the fishermen may be due to the frequent consumption of fish; no such relationship was found both in the farmers and the controls. We found that the concentrations of congeners found as impurities in certain chemicals such as those previously used in agriculture showed no significant differences among the three groups; we consider it unlikely that the farmers would be directly exposed to dioxins from such chemicals. Thus, it is probable that the primary route of dioxin exposure in the Japanese population is through the food chain via fish consumption, regardless of occupation. No meaningful relationship between blood dioxin concentration and CYP1A1 polymorphisms was found in this study, although there was a significant difference between the concentration of total non-ortho-PCBs in genotypes A and B. Further studies on more subjects, including those of genotype C, are needed to confirm the relationship between blood dioxin concentrations and MspI polymorphisms.     

Extraction and cleanup methods of dioxins in house dust from two cities in Japan using accelerated solvent extraction and a disposable multi-layer silica-gel cartridge

A simple and rapid method for the extraction and cleanup of dioxins from house dust was developed using an accelerated solvent extraction (ASE) method and a multi-layer silica-gel cartridge. It was found that the WHO-TEQ levels of dioxins extracted from the house dust obtained by both a conventional soxhlet extraction and the ASE were almost equal, when the data obtained by both methods were compared. As for the cleanup method, a multi-layer silica-gel cartridge yielded higher dioxin recoveries than the alkaline digestion method. The average values of the dioxins in house dust from Kumagaya city and Sendai city in Japan (Sendai city is bigger than Kumagaya city with respect to the population and industry), were 15.6 pg TEQ/g (8.6-26.0 pg TEQ/g, n=5, Kumagaya city) and 16.0 pg TEQ/g (5.9-30.5 pg TEQ/g, n=5, Sendai city), respectively.     

Investigation into the relationship between major and minor element contents and particle size and leachability of boron in fly ash from coal fuel thermal power plants

A basic investigation of boron in discharged fly ash by coal fuel thermal power plants in several worldwide locations was carried out. Eight kinds of fly ash sample were prepared from eight coal fuel thermal power plants. Two of the fly ash samples were used to examine the relationship between the concentration of boron in fly ash and the particle size. When the particle size of fly ash is smaller, there is a possibility that it will be released into the air and spread over a wide area in the environment. However, it has become apparent that fly ash of smaller particle size has a higher concentration of boron and a higher enrichment factor. In other fly ash samples, the boron contents were examined and leaching tests were carried out. There is acidic fly ash as well as alkaline fly ash that contains larger amounts of acidic or basic salts. On alkaline fly ash, when the concentration of boron bound to Fe-Mn oxide is low; it has become apparent that leaching boron is increased in a solution with lower pH of approximately 4 which is nearly the pH of acid rain.     

Aerosol Number Concentrations during Kosa Events on Suburban Hills in Japan

Measurements of aerosol size-separated number concentrations were performed in March 2001 on the Tama Hills of Japan, located near regions of heavy industry. The concentrations of particles larger than 1.0 μ m in diameter dramatically increased during the Kosa phenomena on 6–8 and 18–24 March. The number concentrations of coarse particles (> 3.0 μm) showed distinct diurnal variations, especially during the Kosa events. Fine particles smaller than 0.5 μm increased when the relative humidity was high and the wind speed was low. On the other hand, the coarse particles concentrations were well correlated with wind speed and temperature. The dry deposition velocity of the coarse particles at the forest canopy was estimated from the nighttime decrease in the number concentrations.     

Improved method for the formation of recycled resins from depolymerized products of waste fiber-reinforced plastics: simple and effective purification of recovered monomers by washing with water

The synthesis of recycled plastics from recovered monomeric materials obtained from the depolymerization reaction of fiber-reinforced plastics (FRP) was examined. The depolymerization reaction of FRP in the presence of N,N-dimethylaminopyridine (DMAP) smoothly yielded the corresponding monomers, which mainly consisted of dimethyl phthalates. The polymerization reaction with this monomer failed to form the corresponding unsaturated polyesters due to contamination by N-methyl-4-pyridone, a decomposition product of DMAP. An efficient purification of the recovered monomer was achieved by washing with water, and the purified monomer successfully yielded the corresponding polymers. A hardness test revealed that the polymers were as hard as the polyester made from virgin materials. The present modification provides a practical method for the preparation of recycled plastics from depolymerized plastics.     

Influence of the Hydrothermal Pre-treatments on the Adsorption Characteristics of Activated Carbons from Woods

The hydrothermal treatments were conducted prior to the carbonization of oak woods and the obtained charcoals were activated using carbon dioxide or water vapor. The hydrothermal treatments brought about the elutions of acid-soluble lignin fractions as well as hemicellulose fractions accompanied with the decomposition of lignin carbohydrate complexes in the cell walls, which lowered not only the carbon yield of charcoal but also the crystal parameters for the carbon crystallites. However, the activated carbons (AC) produced via the hydrothermal pre-treatment showed superior adsorption properties especially for the adsorptions of 2-methylisoborneol and geosmin as compared with the untreated commercial AC. The hydrothermal treatments prior to the carbonization have some potential to increase the fractions of meso-pores effective for the adsorption of globular shaped molecules.     

Molecular taxonomy of vestimentiferans of the western Pacific and their phylogenetic relationship to species of the eastern Pacific. I. Family Lamellibrachiidae

Phylogenetic relationships among vestimentiferans in the family Lamellibrachiidae collected from ten sites in the western Pacific were analyzed on the basis of the nucleotide sequence of part of a mitochondrial gene for cytochrome oxidase I. The 103 individuals analyzed were tentatively classified into five species: namely, Lamellibrachia satsuma, three tentative species inhabiting Japanese waters and one tentative species from the Manus Basin. Phylogenetic analysis of the four tentative species, L. satsuma, and two lamellibrachiids, whose sequences had been reported previously, namely L. columna from the Lau Basin and L. barhami from the Oregon Margin and the Middle Valley, revealed that the lamellibrachiids from Japanese waters were not monophyletic. While two tentative species from Japanese waters and L. columna formed a monophyletic group, the other tentative species from Japanese waters was closely related to the tentative species from the Manus Basin. L. satsuma was shown to be phylogenetically distinct from other lamellibrachiids of the western Pacific. A lamellibrachiid that had been collected from the Nikko Seamount was also demonstrated to be L. sastuma.