The application of reliability models in traffic accident frequency analysis

Analysis of traffic accident frequency represents an important subject of research of many authors. From the aspect of temporal analysis of traffic accident occurrence, two approaches have been singled out in previous practice: the collective (analyzes traffic accidents over a longer period of time) and individual (analyzes traffic accidents in real time). The paper shows that the system reliability theory, with certain adjustments, can be largely used to analyze traffic accident frequency based on the individual approach. A certain similarity has been observed between the system reliability theory and the traffic safety theory, and conceptual adjustment of equivalent terms and states has been performed based on this. A model has been successfully tested on the basis of which, for the road and sections, we have determined the traffic accident frequency, the probability of the occurrence of a certain number of traffic accidents and the mean time between two consecutive traffic accidents.     

Headspace solid phase microextraction method for determination of triazine and organophosphorus pesticides in soil

A headspace solid phase microextraction method (HS-SPME) for simultaneous determination of five pesticides belonging to triazine and organophosphorus pesticide groups in soil samples was developed. Microextraction conditions, such as temperature, extraction time and sodium chloride (NaCl) content were investigated and optimized using 100 μ m polydimethyl-siloxane (PDMS) fiber. Detection and quantification were done by gas chromatography-mass spectrometry (GC-MS). Relative standard deviation (RSD) and recovery values for multiple analysis of soil samples fortified at 30 μ g kg^{? 1} of each pesticide were below 13 % and higher than 70 %, respectively. Limits of detection (LOD) for all the compounds studied were less than 3.2 μ g kg^{? 1}. The proposed method was applied in the analysis of some agricultural soil samples.     

Effect of a mixture of flufenacet and isoxaflutole on population numbers of soil-dwelling microorganisms,enzymatic activity of soil,and maize yield

Abstract

This study was aimed to evaluate the effect of a mixture of flufenacet?+?isoxaflutole on counts of microorganisms, ecophysiological diversity index (EP), colony development index (CD) and on the enzymatic activity of soil and maize growth. The experiment was conducted with sandy clay, to which the tested herbicide was administered in doses of: 0.25, 5.0, 10, 20, 40, 80 and 160?mg/kg. Soil without the addition of the mixture served as the control. Results demonstrated that the tested mixture contributed to a decrease in numbers of Azotobacter, organotrophic bacteria, actinobacteria and fungi. The negative effect of the herbicide could also be noticed in the case of the enzymatic activity of soil. Soil contamination contributed to suppressed activities of dehydrogenases, catalase, urease, alkaline phosphatase and arylsulfatase. In turn, the initial increase in the activity of β-glucosidase was followed by its decline observed with time. The flufenacet?+?isoxaflutole mixture affected also maize plant growth, reducing maize dry matter yield when used at doses from 5.0 to 160?mg/kg. In summary, it may be concluded that mixture evokes a negative effect on the microbiological and biochemical activity of soil and that their excess in the soil leads to plant decay as at the seeding stage.     

Simple and cost-effective measures for the improvement of paper mill effluent treatment – A case study

In this study, the performance and the efficiency of physico-chemical effluent treatment in a paper mill was investigated, with the aim of evaluating the treatment rationality and running stability. The effluent treatment plant (ETP) uses alum as a coagulant and polyacrylamide as a flocculant in multi-stage water purification. Inadequate efficiency and some operational problems were observed and their occurrences were investigated. Several simple measures inside the mill and some technical measures can prevent or postpone expensive end-of-pipe treatment investments, such as biological treatment. Chemically enhanced primary treatment under optimal operating conditions can be a stand-alone technique for achieving high quality effluent. Furthermore, reductions in wastewater generation in combination with fiber and filler recovery provide environmental benefits as well as significant economic savings in production. The advantages of the cleaner production approach in existing treatment units compared to expensive biological end-of-pipe technologies are obvious. This study demonstrated that the examined mill could easily and cost-effectively change its water system toward strict discharge limits by continuing to use the existing treatment units.     

Prenatal diagnosis of complete trisomy 19q

This communication presents the first case of complete trisomy 19q, prenatally detected by ultrasound investigation. Real-time high-resolution ultrasound examination was performed at 19 weeks of gestation. After termination of the pregnancy, autopsy investigation was done. GTG-banding, fluorescence in situ hybridization m-(FISH) analysis, and FISH analysis with a 19q subtelomeric specific probe were used for identification of the fetal karyotype. Sonographic examination revealed an enlarged cisterna magna, cerebellar hypoplasia and aplasia of the inferior part of the vermis, combined and bilateral kidney malformations, significant nuchal fold, absence of fetal nasal bones, and intracardial calcifications. Autopsy confirmed ultrasound findings, but also revealed situs viscerum inversus of the lungs. Fetal karyotype was defined as: 46,XY,der(21)t(19;21)(q11;p13)mat. Our ultrasound and autopsy findings will certainly contribute to better knowledge of phenotype characterization of this rare chromosomal disorder. Copyright © 2007 John Wiley & Sons, Ltd.     

Size distribution of black (BC) and total carbon (TC) in Vienna and Ljubljana

During two campaigns in winter 2004, size segregated impactor samples (0.1-10 microm) and filter samples were taken in two Central European cities (Vienna, Austria and Ljubljana, Slovenia). The impactor samples were analyzed for major inorganic ions and short-chain organic acids, total carbon (TC) and black carbon (BC). Maximum concentrations of total mass were 71.6 microg m(-3) in Vienna and 73.1 microg m(-3) in Ljubljana. Minimum concentrations in Vienna were only half those in Ljubljana. The BC content of the aerosol was similar (ca. 8%), but the BC/TC ratio was higher in Vienna than in Ljubljana (0.39 vs. 0.29), reflecting the different contribution of diesel traffic emissions. The mass median diameters of the submicron size distributions of all major fractions (total mass, TC, BC and SO(4)(2-)) were smaller in Vienna (0.43 microm, 0.41 microm, 0.38 microm and 0.48 microm, respectively) than in Ljubljana (0.55 microm, 0.44 microm, 0.42 microm and 0.60 microm, respectively). Impactor/filter ratios for total mass were 0.79 in Vienna and 0.82 in Ljubljana, while the ratios for BC were 0.56 in Vienna and 0.49 in Ljubljana. An estimation of the mixing state of accumulation mode BC indicated that 33% and 37% of BC, respectively, are mixed externally to the aerosol in the accumulation size range in Vienna and Ljubljana.     

Trace metals accumulation in soil irrigated with polluted water and assessment of human health risk from vegetable consumption in Bangladesh

Trace metals accumulation in soil irrigated with polluted water and human health risk from vegetable consumption was assessed based on the data available in the literature on metals pollution of water, soil, sediment and vegetables from the cites of Bangladesh. The quantitative data on metal concentrations, their contamination levels and their pollution sources have not been systematically gathered and studied so far. The data on metal concentrations, sources, contamination levels, sample collection and analytical tools used were collected, compared and discussed. The USEPA-recommended method for health risk assessment was used to estimate human risk from vegetable consumption. Concentrations of metals in water were highly variable, and the mean concentrations of Cd, Cr, Cu and As in water were found to be higher than the FAO irrigation water quality standard. In most cases, mean concentrations of metals in soil were higher than the Bangladesh background value. Based on geoaccumulation index (I _geo) values, soils of Dhaka city are considered as highly contaminated. The I _geo shows Cd, As, Cu, Ni, Pb and Cr contamination of agricultural soils and sediments of the cities all over the Bangladesh. Polluted water irrigation and agrochemicals are identified as dominant sources of metals in agricultural soils. Vegetable contamination by metals poses both non-carcinogenic and carcinogenic risks to the public. Based on the results of the pollution and health risk assessments, Cd, As, Cr, Cu, Pb and Ni are identified as the priority control metals and the Dhaka city is recommended as the priority control city. This study provides quantitative evidence demonstrating the critical need for strengthened wastewater discharge regulations in order to protect residents from heavy metal discharges into the environment.     

An Ecophysiological Study of Plants Growing on the Fly Ash Deposits from the “Nikola Tesla–A” Thermal Power Station in Serbia

This ecophysiological research on the ash deposits from the Nikola Tesla–A thermal power station in Serbia covered 10 plant species (Tamarix gallica, Populus alba, Spiraea van-hauttei, Ambrosia artemisifolia, Amorpha fruticosa, Eupatorium cannabinum, Crepis setosa, Epilobium collinum, Verbascum phlomoides, and Cirsium arvense). This paper presents the results of a water regime analysis, photosynthetic efficiency and trace elements (B, Cu, Mn, Zn, Pb, and Cd) content in vegetative plant parts. Water regime parameters indicate an overall stability in plant-water relations. During the period of summer drought, photosynthetic efficiency (Fv/Fm) was low, ranging from 0.429 to 0.620 for all the species that were analyzed. An analysis of the tissue trace elements content showed a lower trace metal concentration in the plants than in the ash, indicating that heavy metals undergo major concentration during the combustion process and some are not readily taken up by plants. The Zn and Pb concentrations in all of the examined species were normal whereas Cu and Mn concentrations were in the deficiency range. Boron concentrations in plant tissues were high, with some species even showing levels of more than 100 g/g (Populus sp., Ambrosia sp., Amorpha sp., and Cirsium sp.). The presence of Cd was not detected. In general, it can be concluded from the results of this research that biological recultivation should take into account the existing ecological, vegetation, and floristic potential of an immediate environment that is abundant in life forms and ecological types of plant species that can overgrow the ash deposit relatively quickly. Selected species should be adapted to toxic B concentrations with moderate demands in terms of mineral elements (Cu and Mn).