Inferring chemical effects on carbon flows in aquatic food webs: Methodology and case study

The majority of ecotoxicological enclosure experiments monitor species abundances at different chemical concentrations. Here, we present a new modelling approach that estimates changes in food web flows from such data and show that population- and food web level effects are revealed that are not apparent from abundance data alone. For the case of cypermethrin in freshwater enclosures, photosynthesis and excretion (d⁻¹) of phytoplankton at 3.643 μg L⁻¹ cypermethrin were 30% lower and 100% higher than in the control, respectively. The ingestion rate of mesozooplankton (d⁻¹) was 6 times higher in the treated enclosures than in the control as food concentration increased with insecticide exposure. With increasing cypermethrin concentrations, nanoflagellates progressively relied on phytoplankton as their main food source, which rendered the food web less stable. We conclude that this tool has excellent potential to analyse the wealth of enclosure data as it only needs species abundance and general constraints.     

A multi-approach monitoring of particulate matter, metals and PAHs in an urban street canyon

For the first time until now, the results from a prediction model (Atmospheric Dispersion Modelling System (ADMS)-Road) of pollutant dispersion in a street canyon were compared to the results obtained from biomonitors. In particular, the instrumental monitoring of particulate matter (PM10) and the biomonitoring of 14 polycyclic aromatic hydrocarbons (PAHs) and 11 metals by Quercus ilex leaves and Hypnum cupressiforme moss bags, acting as long- and short-term accumulators, respectively, were carried out. For both PAHs and metals, similar bioaccumulation trends were observed, with higher concentrations in biomonitors exposed at the leeward canyon side, affected by primary air vortex. The major pollutant accumulation at the leeward side was also predicted by the ADMS-Road model, on the basis of the prevailing wind direction that determines different exposure of the street canyon sides to pollutants emitted by vehicular traffic. A clear vertical (3, 6 and 9 m) distribution gradient of pollutants was not observed, so that both the model and biomonitoring results suggested that local air turbulences in the street canyon could contribute to uniform pollutant distribution at different heights.     

Functional redundancy and food web functioning in linuron-exposed ecosystems

An extensive data set describing effects of the herbicide linuron on macrophyte-dominated microcosms was analysed with a food web model to assess effects on ecosystem functioning. We showed that sensitive phytoplankton and periphyton groups in the diets of heterotrophs were gradually replaced by more tolerant phytoplankton species as linuron concentrations increased. This diet shift--showing redundancy among phytoplankton species--allowed heterotrophs to maintain their functions in the contaminated microcosms. On an ecosystem level, total gross primary production was up to hundred times lower in the treated microcosms but the uptake of dissolved organic carbon by bacteria and mixotrophs was less sensitive. Food web efficiency was not consistently lower in the treated microcosms. We conclude that linuron predominantly affected the macrophytes but did not alter the overall functioning of the surrounding planktonic food web. Therefore, a risk assessment that protects macrophyte growth also protects the functioning of macrophyte-dominated microcosms.     

Preparation of mercury emissions inventory for eastern North America

Point and area inventories of anthropogenic mercury emissions documented by US and Canadian environmental agencies have been aggregated into a single archive for analysis and air pollution modeling work. For 5341 point sources and 1634 aggregated area sources, mercury emissions are apportioned among elemental gaseous [Hg(0)], reactive gaseous[Hg(II)], and particulate [Hg(p)] emissions using speciation factors derived from available monitoring measurements. According to this inventory, 4.82 x 10(5) mol of mercury were emitted in calendar year 1996 in the latitude range 24-51 degrees north, and longitude range 64-91 degrees west, which covers most of North America east of the Mississippi River. Using speciation factors consistent with past emission source studies, we find the relative emission proportions among Hg(0):Hg(II):Hg(p) species are 47:35:18. Maps of the various mercury species' emissions patterns are presented. Gridded emission patterns show local mercury emission extremes associated with individual cement production and municipal incineration facilities, and in contrast to past inventories, population centers do not stand out. Considerable uncertainties are still present in estimating emissions from large point sources, as are methods of apportioning emissions among various mercury species.     

Sustainable watershed management: an international multi-watershed case study

Global freshwater resources are being increasingly polluted and depleted, threatening sustainable development and human and ecosystem health. Utilizing case studies from 4 different watersheds in the United States, Japan, Switzerland, and Brazil, this paper identifies the most relevant sustainability deficits and derives general vectors for more sustainable water management. As a consequence of the demographic and economic developments experienced in the last few decades, each watershed has suffered declines in water quality, streamflow and biotic resources. However, the extent and the cultural perception of these water-related problems vary substantially in the different watersheds, leading to specific water-management strategies. In industrialized countries, exemplified by the US, Switzerland, and Japan, these strategies have primarily consisted of finance- and energy-intensive technologies, allowing these countries to meet water requirements while minimizing human health risks. But, from a sustainability point of view, such strategies, relying on limited natural resources, are not long-term solutions. For newly industrialized countries such as Brazil, expensive technologies for water management are often not economically feasible, thus limiting the extent to which newly industrialized and developing countries can utilize the expertise offered by the industrialized world. Sustainable water management has to be achieved by a common learning process involving industrialized, newly industrialized, and developing countries, following general sustainability guidelines as exemplified in this paper.     

Pesticide residue removal in classic domestic processing of tomato and its effects on product quality

This study was undertaken to evaluate the effectiveness of several household practices (washing with water or acidic, alkaline, and oxidizing solutions, and peeling) in minimizing pesticide residue contamination of tomatoes, as well as the impact on the quality of the treated fruit. Tests were performed using two systemic fungicides (azoxystrobin and difenoconazole) and one contact fungicide (chlorothalonil). Solid-liquid extraction with low temperature partition (SLE/LTP) and liquid-liquid extraction with low temperature partition (LLE/LTP) were used to prepare the samples for pesticides determination by gas chromatography. Washing the tomatoes with water removed approximately 44% of chlorothalonil, 26% of difenoconazole, and 17% of azoxystrobin. Sodium bicarbonate (5%) and acetic acid (5%) solutions were more efficient, removing between 32 and 83% of the residues, while peeling removed from 68 to 88% of the pesticides. The washing solutions altered some fruit quality parameters, including acidity and chroma, and also caused weight loss. Acetic acid (0.15 and 5%) and hypochlorite (1%) solutions had the greatest effect on these parameters.     

Retention of arsenic on hydrous ferric oxides generated by electrochemical peroxidation

Electrochemical peroxidation (ECP), an emerging remediation technology, with direct electric current applied to steel electrode and small addition of H2O2, was used to remove As(III) from contaminated aqueous solutions. Bench scale experiments were conducted to evaluate the sorption and distribution of arsenic between the soluble and solid state hydrous ferric oxides (HFO) formed as part of the ECP process. ECP was effective in removing arsenic from the aqueous solution, with >98% of the applied As(III) adsorbed on HFO. Removal was complete within 3 min of ECP treatment and apparently independent of the initial pH of the water (3.5-9.5). In the absence of H2O2 more As(III) was adsorbed by solid state iron at pH 9.5 than at 3.5 (2600 vs. 1750 microg l(-1)). Thus H2O2 was crucial to oxidize As(III) to As(V) which is more strongly retained by HFO. Removal of As was not significantly affected by the concentration of H2O2 or by current processing time. The optimal operating conditions were pH < 6.5, H2O2 concentration of 10 mg l(-1) and current process time not exceeding 3 min. X-ray diffraction (XRD), diffuse-reflectance infrared Fourier transform (DRIFT) spectroscopy and transmission electron microscopy (TEM) were applied to study the HFO deposits. The XRD data indicated the prevalence of poorly ordered Fe minerals in the suspended ECP solids with a dominance of 5 line ferrihydrite in the absence of H2O2. At pH 3.5 and with 100 mg H2O2 l(-1), akaganeite was formed, whereas an incipient hematitic phase, reflection at 0.39 nm, occurred at pH 6.5. DRIFT data indicate that both As(III) and As(V) were specifically adsorbed onto HFO at acid and neutral pH. TEM observations indicated the presence of spherical shape ferrihydrite and provided evidence for possible formation of subrounded hematite and acicular shape goethite.     

Renewable energy and greenhouse gas emissions from the waste sectors of European Union member states: a panel data analysis

In the last two decades, there has been a rich debate about the environmental degradation that results from exposure to solid urban waste. Growing public concern with environmental issues has led to the implementation of various strategic plans for waste management in several developed countries, especially in the European Union. In this paper, the relationships were assessed between economic growth, renewable energy extraction and greenhouse gas (GHG) emissions in the waste sector. The Environmental Kuznets Curve hypothesis was analysed for the member states of the European Union, in the presence of electricity generation, landfill and GHG emissions for the period 1995 to 2012. The results revealed that there is no inverted-U-shaped relationship between income and GHG emissions in European Union countries. The renewable fuel extracted from waste contributes to a reduction in GHG, and although the electricity produced also increases emissions somewhat, they would be far greater if the waste-based generation of renewable energy did not take place. The waste sector needs to strengthen its political, economic, institutional and social communication instruments to meet its aims for mitigating the levels of pollutants generated by European economies. To achieve the objectives of the Horizon 2020 programme, currently in force in the countries of the European Union, it will be necessary to increase the share of renewable energy in the energy mix.     

Formation of PCDD/Fs in the sintering process: role of the grid-Cr2O3 catalyst in the de novo synthesis

The sintering process is among the major sources of the very toxic polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in the environment. At the industrial scale, it has been shown that dust collected on the grid, which supports the feed, contains PCDD/Fs amounts between the values found in the bottom of the cake and the values found on dust collected during gas sampling in the wind boxes. This fact suggests that the grid, containing 25wt.% of chromium, could have a catalytic activity in PCDD/Fs formation during the sintering process. This research tries to study this potential role. The de novo synthesis of PCDD/Fs is simulated at laboratory scale by thermal treatments of samples mixed with grid filings or Cr2O3. The thermal experiments performed with E.S.P. dust (dust collected in the electrostatic precipitator of a sintering plant) or graphite mixed with grid filings do not allow to confirm a role of the grid in PCDD/Fs formation during the industrial process. On the other hand, it has been shown that Cr2O3 can be considered as a catalyst in the de novo synthesis of PCDD/Fs. This compound takes place in the two steps of the de novo synthesis: the degradation of the carbon matrix as well as the chlorination reactions.