Evaluation of soil ecotoxicity tests with functional endpoints for the risk assessment of plant protection products

This paper outlines the state-of-the-art in discussing tests with functional endpoints for the soil compartment for regulatory purposes. In spite of the fact that organic matter decomposition is one of the most important functions in the soil ecosystem, this process has not been the subject of a test requirement for risk assessment of plant protection products until very recently. Since EU Directive 91/414/EEC concerning the placing of plant protection products on the market requires in its Annex III, point 10.6.2 (entitled “Effects on other soil, non-target macro-organisms”), the evaluation of effects on organic matter breakdown, there is an urgent need to fulfil this requirement. The use of functional endpoints in terrestrial model ecosystems is also under discussion in the framework of the notification process for chemicals. Four potential methods (bait-lamina-test, litterbag test, minicontainer test, cotton-strip assay) taken from ecological literature are briefly reviewed and evaluated in this paper using several defined criteria regarding their usefulness for registration purposes. In this context, areas for further research are identified. The insecticide Dimilin (a.i. diflubenzuron) is used as an example to show how such a test improves risk assessment. Therefore, it is strongly recommended that a guidance paper describing the main principles of at least one test method on organic matter decomposition should be written in order to realise the EU requirement.     

Research trends in biodiversity loss: a bibliometric analysis

Environmental Science and Pollution Research - Although increased attempts to preserve biodiversity ecosystems have been widely publicized, bibliometric research of biodiversity loss remains...     

Impact and effectiveness of Bio-Coke conversion from biomass waste as alternative source of coal coke in Southeast Asia

Journal of Material Cycles and Waste Management - Growing concern over fossil fuel depletion and the environmental impact of greenhouse gases have driven the demand for solid biofuel energy as an...     

Determination of elemental carbon in lake sediments using a thermal–optical transmittance (TOT) method

An improved chemical oxidation pretreatment method has been developed for the determination of elemental carbon (EC) [also known as black carbon (BC) or soot] in lake sediments, using a thermal–optical transmittance (TOT) carbon analyzer. The method employs six steps: (1) removal of carbonates by treatment with HCl; (2) removal of silicates by treatment with HF + HCl; (3) removal of any remaining carbonates by treatment with HCl; (4) removal of humic acids by treatment with NaOH; and (5) oxidation of kerogens by K₂Cr₂O₇ + H₂SO₄. A critical step of zinc chloride treatment was added; this apparently changes EC's morphology and enhances retention on quartz fiber filter, resulting in several-fold increased chemical yield. EC was determined using the TOT method with modified combustion timings. Carbon black (acetylene) and four NIST standard reference materials (SRMs) were used for quality control, and to assess the precision of the analysis. The EC recoveries from 18 carbon black samples varied from 90 to 111%, with a mean value of 99 ± 6%. The high EC recoveries confirmed the validity of the method. Char reference materials (i.e. chestnut wood and grass char) were used to determine potential contribution to EC in our measurements. The char references containing about 700 mg total organic carbon (OC) contributed ～1.5% EC. The measured EC values from four NIST standards were 17.0 ± 0.6, 24.2 ± 3.2, 5.6, and 1.9 ± 0.1 mg g_dw^?1 for SRM-1648, SRM-1649a, SRM-1941b and SRM-8704, respectively. These values in SRMs were in agreement (<±4%) with the previously reported values. The method was applied to determine the EC in sediment cores from an urban lake and a remote mountain lake in the Northeastern United States. The EC concentrations in two lakes mimic the model EC emissions from the industrial revolution in United States.     

Evaluation of chlordimeform and degradation products for mutagenic and DNA‐damaging activity in salmonella typhimurium and escherichia coli

Abstract

The mutagenic activity of chlordimeform and two of its breakdown products, 4‐chloro‐o‐toludine and 4‐chloro‐N‐formyl‐o‐toluidine were determined with five histidine dependent strains of Salmonella typhimurium (TA1535, TA1537, TA1538, TA98, TA100) and five tryptophan dependent strains of E. coli WP₂. (WP₂, WP₂uvrA, WP67, CM611, CM571) with and without rat liver microsomal enzymes. 4‐chloro‐o‐toluidine increased the number of the reversions of the S. typhimurium strain TA1535 more than two fold over spontaneous at the concentration of 400 μg/plate.

The results of the DNA repair tests in the Salmonella TA1538/TA1978 and E. coli multirepair deficient systems showed that both breakdown products were active in inducing damage not repaired in at least one repair deficient strain while chlordimeform itself was inactive.     

Development of Lymantria dispar affected by manganese in food

We studied the response of gypsy moth (Lymantria dispar (Linnaeus) (Lepidoptera: Lymantriidae)) to the content of manganese in food in the laboratory breeding of caterpillars. The food of the caterpillars {Betula pendula Roth (Fagales: Betulaceae) leaves} was contaminated by dipping in the solution of MnCl₂·4H₂O with manganese concentrations of 0, 0.5, 5 and 10 mg ml^?1, by which differentiated manganese contents (307; 632; 4,087 and 8,124 mg kg^?1) were reached. Parameters recorded during the rearing were as follows: effect of manganese on food consumption, mortality and length of the development of caterpillars, pupation and hatching of imagoes. At the same time, manganese concentrations were determined in the offered and unconsumed food, excrements, and exuviae of the caterpillars, pupal cases and imagoes by using the AAS method. As compared with the control, high manganese contents in the food of gypsy moth caterpillars affected the process of development particularly by increased mortality of the first instar caterpillars (8 % mortality for caterpillars with no Mn contamination (T0) and 62 % mortality for subjects with the highest contamination by manganese (T3)), by prolonged development of the first–third instar (18.7 days (T0) and 27.8 days (T3)) and by increased food consumption of the first–third instar {0.185 g of leaf dry matter (T0) and 0.483 g of leaf dry matter (T3)}. The main defence strategy of the caterpillars to prevent contamination by the increased manganese content in food is the translocation of manganese into frass and exuviae castoff in the process of ecdysis. In the process of development, the content of manganese was reduced by excretion in imagoes to 0.5 % of the intake level even at its maximum inputs in food.     

On the successful use of a simplified model to simulate the succession of toxic cyanobacteria in a hypereutrophic reservoir with a highly fluctuating water level

Many freshwater bodies worldwide that suffer from harmful algal blooms would benefit for their management from a simple ecological model that requires few field data, e.g. for early warning systems. Beyond a certain degree, adding processes to ecological models can reduce model predictive capabilities. In this work, we assess whether a simple ecological model without nutrients is able to describe the succession of cyanobacterial blooms of different species in a hypereutrophic reservoir and help understand the factors that determine these blooms. In our study site, Karaoun Reservoir, Lebanon, cyanobacteria Aphanizomenon ovalisporum and Microcystis aeruginosa alternatively bloom. A simple configuration of the model DYRESM-CAEDYM was used; both cyanobacteria were simulated, with constant vertical migration velocity for A. ovalisporum, with vertical migration velocity dependent on light for M. aeruginosa and with growth limited by light and temperature and not by nutrients for both species. The model was calibrated on two successive years with contrasted bloom patterns and high variations in water level. It was able to reproduce the measurements; it showed a good performance for the water level (root-mean-square error (RMSE) lower than 1 m, annual variation of 25 m), water temperature profiles (RMSE of 0.22–1.41 °C, range 13–28 °C) and cyanobacteria biomass (RMSE of 1–57 μg Chl a L^?1, range 0–206 μg Chl a L^?1). The model also helped understand the succession of blooms in both years. The model results suggest that the higher growth rate of M. aeruginosa during favourable temperature and light conditions allowed it to outgrow A. ovalisporum. Our results show that simple model configurations can be sufficient not only for theoretical works when few major processes can be identified but also for operational applications. This approach could be transposed on other hypereutrophic lakes and reservoirs to describe the competition between dominant phytoplankton species, contribute to early warning systems or be used for management scenarios.     

Resource allocation in transboundary tuna fisheries: A global analysis

Resource allocation is a fundamental and challenging component of common pool resource governance, particularly transboundary fisheries. We highlight the growing importance of allocation in fisheries governance, comparing approaches of the five tuna Regional Fisheries Management Organizations (tRFMOs). We find all tRFMOs except one have defined resources for allocation and outlined principles to guide allocation based on equity, citizenship, and legitimacy. However, all fall short of applying these principles in assigning fish resources. Most tRFMOs rely on historical catch or effort, while equity principles rarely determine dedicated rights. Further, the current system of annual negotiations reduces certainty, trust, and transparency, counteracting many benefits asserted by rights-based management proponents. We suggest one means of gaining traction may be to shift conversations from allocative rights toward weighting of principles already identified by most tRFMOs. Incorporating principles into resource allocation remains a major opportunity, with important implications for current and future access to fish.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01371-3) contains supplementary material, which is available to authorized users.     

Nanofluid heat transfer under mixed convection flow in a tube for solar thermal energy applications

The solar flat plate collector operating under different convective modes has low efficiency for energy conversion. The energy absorbed by the working fluid in the collector system and its heat transfer characteristics vary with solar insolation and mass flow rate. The performance of the system is improved by reducing the losses from the collector. Various passive methods have been devised to aid energy absorption by the working fluid. Also, working fluids are modified using nanoparticles to improve the thermal properties of the fluid. In the present work, simulation and experimental studies are undertaken for pipe flow at constant heat flux boundary condition in the mixed convection mode. The working fluid at low Reynolds number in the mixed laminar flow range is undertaken with water in thermosyphon mode for different inclination angles of the tube. Local and average coefficients are determined experimentally and compared with theoretical values for water-based Al₂O₃ nanofluids. The results show an enhancement in heat transfer in the experimental range with Rayleigh number at higher inclinations of the collector tube for water and nanofluids.