Optimizing nutrient supply in a rotatory-switching biofilter for toluene vapor treatment

The influence of nutrient conditions on the degradation of toluene vapor in a rotatory-switching biofilter (RSB) was investigated. The biofilter consists of four segments connected in series, each with a packing layer made of polyvinyl formal. The influent airstreams including toluene vapors were passed through segments 1-3 as up-flow with a toluene concentration of 0.9-1.2 g m(-3) and with an empty-bed retention time of 26-52 sec. Nutrient solutions were fed to all packed segments once a day by means of immersion. The nutrient solution was used repeatedly and replenished by the addition of (NH4)2SO4. The result at 155 days showed nitrogen depletion was particularly obvious and the lack of nitrogen affected toluene removal. By adding 161 g of nitrogen solution per volumetric cubic meter of reactor, toluene removal efficiency was immediately increased to greater than 99%. With long-term biofilter operation, 21%-32% of ammonium was utilized for nitrification because of the growth of nitrifying bacteria such as Nitrosomonas sp. Based on the carbon-nitrogen balance, the daily nitrogen demand for toluene removal was estimated 2.1 g day(-1) at a toluene load of 70 g m(-3) hr(-1).     

Characteristics of biosolids in dimethyl ether dewatering method

In this study, a method for removing water from biosolids that uses dimethyl ether (DME) as an extractant was considered. This study evaluates the applicability of the DME dewatering method to biosolid cakes by using a DME flow-type experimental apparatus. It was found that a high dewatering ratio is clearly achieved by increasing the liquefied DME/biosolid ratio and lowering the liquefied DME linear velocity. As the liquefied DME/biosolid ratio was increased, the carbon content in dewatered biosolid showed a slight decrease and the TOC concentration in separated liquid increased significantly. Finally, the input energy Es to remove 1 kg of water from the biosolid cake, using both the DME dewatering method and the conventional drying method was estimated. The calculation shows that Es for the DME dewatering process is approximately a third of Es for the conventional thermal drying process.     

Concentrations of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls in blood and breast milk collected from 60 mothers in Sapporo City, Japan

We measured the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), non-ortho polychlorinated biphenyls (non-ortho PCBs), and mono-ortho polychlorinated biphenyls (mono-ortho PCBs) in paired samples of blood and breast milk collected from 60 mothers in Sapporo City, Hokkaido Prefecture, Japan. The present study is one of the few studies in which PCDDs, PCDFs, and dioxin-like PCBs have been measured in blood and breast milk collected from 60 same mothers. Of these 60 mothers, 30 were primipara (mean: 30.1 years, median: 28.0 years) and 30 were multipara (mean: 32.2 years, median: 32.5 years). The arithmetic mean TEQ concentrations of PCDDs, PCDFs, non-ortho PCBs, and mono-ortho PCBs in blood and breast milk of the primiparous mothers were 9.0, 3.3, 5.7, and 0.4 pg TEQ g(-1) lipid, respectively, and 5.2, 2.2, 4.5, and 0.4 pg TEQ g(-1) lipid, respectively, with the total TEQ concentrations of these dioxin-like compounds being 9.3-42.9 (mean: 18.4, median: 17.3) and 7.0-41.1 (mean: 12.3, median: 11.4) pg TEQ g(-1) lipid, respectively. In the case of multiparous mothers, the arithmetic mean TEQ concentrations of these dioxin-like compounds in blood and breast milk were 7.1, 2.7, 5.3, and 0.4 pg TEQ g(-1) lipid, respectively, and 3.9, 1.7, 3.8, and 0.4 pg TEQ g(-1) lipid, respectively, with the total TEQ concentrations being 3.4-28.1 (mean: 15.5, median: 13.9) and 2.7-20.0 (mean: 9.8, median: 9.2)pg TEQ g(-1) lipid, respectively. The total TEQ concentrations of PCDDs, PCDFs, non-ortho PCBs, and mono-ortho PCBs in blood and breast milk of primiparous mothers in Sapporo City appeared to be generally lower than those recently surveyed throughout the greater area of Japan. Significant correlations were observed between age and the total TEQ concentrations of PCDDs, PCDFs, non-ortho PCBs, and mono-ortho PCBs in the blood of primiparae and multiparae, and significant correlations were also observed between age and the total TEQ concentrations of these dioxin-like compounds in the breast milk of primiparae and multiparae. The total TEQ concentrations of PCDDs, PCDFs, and dioxin-like PCBs in the blood of primiparous mothers showed a close correlation to those in their breast milk and also showed good correlations between the total TEQ concentrations of these dioxin-like compounds in the blood of multiparous mothers and those in their breast milk. The result of a comparison of the arithmetic mean concentrations of each congener of PCDDs, PCDFs, non-ortho PCBs, and mono-ortho PCBs in blood and breast milk indicated that the transfer of octachlorodibenzo-p-dioxin (OCDD) from the blood to the breast milk was lower than those of other congeners. In contrast, among mono-ortho PCBs congeners, the arithmetic mean concentrations of 2,3',4,4',5-pentachlorobiphenyl (PentaCB) (#118) and 2,3,3',4,4'-PentaCB (#105) in the breast milk were slightly higher than those in the blood, which suggested that breast-fed infants may be at higher risk from mono-ortho PCBs.     

Congener-specific analysis of non-dioxin-like polychlorinated biphenyls in blood collected from 195 pregnant women in Sapporo City, Japan

We conducted a congener-specific analysis of non-dioxin-like polychlorinated biphenyls (non-dioxin-like PCBs) in blood collected between July 2002 and July 2004 from 195 pregnant women living in Sapporo City of Hokkaido Prefecture, Japan. The present study is one of the few studies in which full congener concentrations of non-dioxin-like PCBs have been measured in the blood of pregnant women. Of the 195 pregnant women, 101 were primipara (mean: 28.8 years, median: 28.0 years) and 94 were multipara (mean: 32.3 years, median: 33.0 years). Among the 197 non-dioxin-like PCB congeners, 58 congeners were identified in the blood of pregnant women. The arithmetic mean total concentrations of 58 non-dioxin-like PCB congeners in the blood of primiparous and multiparous mothers in Sapporo City were 42.2-329.3 (mean: 114.5, median: 98.6) and 31.5-258.0 (mean: 100.3, median: 91.4)ngg(-1)lipid, respectively. The results show that the contamination of non-dioxin-like PCBs in the blood of women has decreased compared to past levels in other domestic areas, in which the subject age was similar to that in this study. The results of the present study indicate that current levels of non-dioxin-like PCBs in the blood of Japanese women and can be used as baseline data for future temporal trends. The sums of the ratios of the concentrations of hexaCBs and heptaCBs to the total concentrations of 58 non-dioxin-like PCB congeners in the blood of primiparous and multiparous mothers were 78.5% and 77.7%, respectively. The hexaCBs ratios in the blood of primiparous and multiparous mothers were 45.4% and 44.7%, respectively. HexaCB-153 among hexaCBs congeners, the most abundant congener in the blood of primiparous and multiparous mothers, contributed approximately 22.0% and 21.8% to the total concentrations of 58 non-dioxin-like PCBs congeners that were measured in the blood, respectively. Among the non-dioxin-like PCB congeners measured in the present study, hexaCB-138, heptaCB-170, heptaCB-180, and heptaCB-182/heptaCB-187 also showed high ratios to total concentrations of 58 non-dioxin-like PCB congeners detected in the blood of primiparous and multiparous mothers. With regard to the relationship between the total concentrations of 58 non-dioxin-like PCB congeners in maternal blood and the number of deliveries or the age of primiparous and multifarious mothers, the total levels of these PCB congeners tended to decreases with increases in the number of deliveries and significantly increased with increasing maternal age in both groups. Furthermore, significant correlations were observed between the total concentrations of these PCB congeners in blood and the age of primiparae and multiparae. The concentrations of hexaCB-153 in the blood of primiparous and multiparous mothers showed a close correlation to the total concentrations of these PCBs, suggesting that hexaCB-153 could be an indicator of total concentrations of non-dioxin-like PCB congeners in the blood of pregnant women.     

Laboratory longitudinal diffusion tests: 1. Dimensionless formulations and validity of simplified solutions

To obtain reliable diffusion parameters for diffusion testing, multiple experiments should not only be cross-checked but the internal consistency of each experiment should also be verified. In the through- and in-diffusion tests with solution reservoirs, test interpretation of different phases often makes use of simplified analytical solutions. This study explores the feasibility of steady, quasi-steady, equilibrium and transient-state analyses using simplified analytical solutions with respect to (i) valid conditions for each analytical solution, (ii) potential error, and (iii) experimental time. For increased generality, a series of numerical analyses are performed using unified dimensionless parameters and the results are all related to dimensionless reservoir volume (DRV) which includes only the sorptive parameter as an unknown. This means the above factors can be investigated on the basis of the sorption properties of the testing material and/or tracer. The main findings are that steady, quasi-steady and equilibrium-state analyses are applicable when the tracer is not highly sorptive. However, quasi-steady and equilibrium-state analyses become inefficient or impractical compared to steady state analysis when the tracer is non-sorbing and material porosity is significantly low. Systematic and comprehensive reformulation of analytical models enables the comparison of experimental times between different test methods. The applicability and potential error of each test interpretation can also be studied. These can be applied in designing, performing, and interpreting diffusion experiments by deducing DRV from the available information for the target material and tracer, combined with the results of this study.     

Identification of particles containing chromium and lead in road dust and soakaway sediment by electron probe microanalyser

Individual particles containing Cr and/or Pb and other major components were identified in road dust from a heavily used road (hereinafter 'heavy traffic road dust'), road dust from a residential area and soakaway sediment by electron probe microanalyser to locate their sources and carrier particles. Individual particles containing high levels of Cr and/or Pb (>or=0.2%) were identified using wavelength dispersive spectrometry (WDS) map analysis. Chromium, Pb and other major elements were then determined by means of a combination of WDS and energy-dispersive spectrometry in all identified particles, 50 particles containing neither Cr nor Pb from each type of road dust and soakaway sediment, and yellow road line markings. WDS map analysis revealed that many particles containing both Cr and Pb were present among the identified particles in heavy traffic road dust, whereas they were minor components in road dust from the residential area and soakaway sediment. The plots of X-ray intensities of Cr vs. Pb were linear for the identified particles containing both Cr and Pb in heavy traffic road dust, and the line closely fitted the plots for the three yellow road line marking samples. Individual particles were then classified using cluster analysis of element components. The results revealed that the adsorption of source materials or released metals onto soil minerals occurred in road dust and soakaway sediment, that the yellow road line markings were sources of Cr and Pb in heavy traffic road dust, and that materials containing Fe as a major component, such as stainless steel, were additional sources of Cr in both road dust and soakaway sediment.     

Evaluation of environmentally friendly lubricant for aluminum cold forging using friction test based on spline extrusion

It is required to replace the aluminum fluoride coating, which is a popular lubricant for aluminum alloy cold forging in Japan, with environmentally friendly lubricants, because the aluminum fluoride coating has high environmental risks and needs much expense. Evaluations of lubrication performance are necessary before lubricant replacement. The authors proposed new friction test based on combined forward spline-backward can extrusion. It can realize large surface expansion, which is a characteristic of aluminum cold forging. In the present paper, a double-layer-type environmentally friendly solid lubricant film and the aluminum fluoride coating were applied to a precipitation hardened aluminum alloy. The lubrication performance was evaluated by the friction test. The double-layer-type lubricant showed superior performance enough for the replacement. The effect of surface treatment applied to workpiece on the lubrication performance was also investigated. The surface asperity generated by a wet-blasting showed high pickup resistance and low friction.     

Controlled release of molasses melanoidin-like product from hybrid organic–inorganic silica xerogels and its application to the phytoextraction of lead through the Indian mustard

Environmental Science and Pollution Research - In this study, we investigate the release of melanoidin-like product (MLP) from hybrid silica xerogels to control the quantity of MLP in the medium...     

One-step formation of oligopeptide-like molecules from Glu and Asp in hydrothermal environments

Biopolymer accumulation in the absence of enzymes is an essential step for the chemical evolution of primitive life-like systems, and successful simulation experiments of prebiotic biopolymer formation have suggested that oligopeptides could have formed near submarine hydrothermal vent environments on primitive earth. However, the yield and length of oligopeptides -- typically limited to 6-mers -- seems to be inadequate. One reason is the rapid formation of diketopiperazines (DKPs) from dipeptides. In this study, using a hydrothermal microflow reactor, we show that the one-step synthesis of oligopeptide-like molecules of length up to 20-mers proceeds from Glu and Asp. Yields of up to 0.17-0.57% were obtained in an acidic solution within 183 s at 250-310 degrees C, as evaluated by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) analysis and different types of high-performance liquid chromatography (HPLC) analyses. The present study indicates that Glu and Asp may have played important roles in the chemical evolution of oligopeptide-like molecules in hydrothermal vent environments on primitive earth.     

Thermodynamic estimation of minor element distribution between immiscible liquids in Fe-Cu-based metal phase generated in melting treatment of municipal solid wastes

Waste electrical and electronic equipment (WEEE) has become an important target in managing material cycles from the viewpoint of not only waste management and control of environmental pollution but also resource conservation. This study investigated the distribution tendency of trace elements in municipal solid waste (MSW) or incinerator ash, including valuable non-ferrous metals (Ni, Co, Cr, Mn, Mo, Ti, V, W, Zr), precious group metals (PGMs) originated from WEEE (Ag, Au, Pd, Pt), and others (Al, B, Pb, Si), between Fe-rich and Cu-rich metal phases by means of simple thermodynamic calculations. Most of the typical alloying elements for steel (Co, Cr, Mo, Nb, Ni, Si, Ti, V, and W) and Rh were preferentially distributed into the Fe-rich phase. PGMs, such as Au, Ag, and Pd, were enriched in the Cu-rich phase, whereas Pt was almost equally distributed into both phases. Since the primary metallurgical processing of Cu is followed by an electrolysis for refining, and since PGMs in crude copper have been industrially recovered from the resulting anode slime, our results indicated that Ag, Au, and Pd could be effectively recovered from MSW if the Cu-rich phase could be selectively collected.