改性魔芋废弃物对废水中的油脂和Cr(VI)的去除

采用醚化、磷酸酯化和接枝共聚等3种方法改性魔芋下脚料中提取的絮凝活性物,用以去除废水中油脂和Cr(Ⅵ)。反应时间、用量和pH等3因子正交实验表明,经醚化改性与磷酸酯化改性后的絮凝剂分别对油脂和Cr(Ⅵ)的去除效果较好。聚合氯化铝(PAC)用量、ZnSO4用量、pH和微波照射时间等4因子正交实验表明,PAC和ZnSO4可以强化改性絮凝剂效果,对2种污染物的吸附去除效果分别用双常数方程和Elovich方程能够较好地拟合。     

001×14.5离子交换树脂对镍(Ⅱ)的吸附

实验采用离子交换树脂法吸附镍(Ⅱ),树脂选型确定了强酸性阳离子交换树脂001×14.5对镍(Ⅱ)吸附容量最大.用所选的001×14.5树脂吸附镍(Ⅱ)的过程,静态吸附实验表明,转速大于100 r/min时,对树脂吸附的影响可忽略,即基本消除外扩散,pH =7.0时吸附最佳,镍(Ⅱ)吸附率随树脂用量的增加而增大;001×14.5树脂吸附镍(Ⅱ)过程符合Langmuir等温吸附方程,且为优惠吸附;吸附过程符合拟二级动力学模型,吸附过程活化能为E=30.9 kJ/mol,由颗粒内扩散控制;用1 mol/L的硫酸对吸附饱和树脂进行脱附再生,脱附率可达98％以上.     

微波-Fenton法处理EDTA-Cu-Ni废水的工况与效能

为了探索微波-Fenton反应体系中的反应机理,进行了正交实验、单因素影响实验和微波-Fenton与水热-Fenton的对比实验。通过正交实验,确定了微波-Fenton法处理络合态重金属废水的主要影响因子为Fe2+投加量、初始pH、H2O2投加量及反应温度,COD与Ni去除效率的影响因子的权重次序一致,而Cu去除的权重次序则与前两者不同;单因素优化实验结果表明,微波-Fenton法处理EDTA-Cu-Ni废水在反应时间为9 min时的最优条件为:Fe2+投加量为0.5 mmol/L,H2O2投加量为185 mmol/L,初始pH为2.5,反应温度为80℃;此时COD∶Fe2+∶H2O2为1∶0.06∶15(mg/L),各影响因子对有机物与金属离子的去除影响效应不同;微波水浴对比实验结果表明,在微波-Fenton体系中,微波主要起加热和提高反应速率的作用。     

Simultaneous removal of nitrate and pentachlorophenol from simulated groundwater using a biodenitrification reactor packed with corncob

Both nitrate and pentachlorophenol (PCP) are familiar pollutants in aqueous environment. This research is focused on the simultaneous removal of nitrate and PCP from simulated contaminated groundwater using a laboratory-scale denitrification reactor packed with corncob as both carbon source and biofilm support. The reactor could be started up readily, and the removal efficiencies of nitrate and PCP reached up to approximately 98 % and 40–45 % when their initial concentrations were 50 mg N/L and 5 mg/L, respectively, after 15-day continuous operation at 10 h of hydraulic retention time (HRT) and 25 °C. Approximately 91 % of PCP removal efficiency was achieved, with 2.47 mg/L of chloride ion release at 24 h of HRT. Eighty-two percent of chlorine in PCP removed was ionized. The productions of 3-chlorophenol and phenol and chloride ion release indicate that the reductive dechlorination reaction is a major degradation pathway of PCP under the experimental conditions.     

Electro-migration of heavy metals in an aged electroplating contaminated soil affected by the coexisting hexavalent chromium

Cr(VI) was often reported to oxidize soil organic matter at acidic environments due to its high ORP, probably thus changing cationic metal species bound to soil organic matter, and influencing their electro-migration patterns. However, such an effect on the electro-migration was not confirmed in most previous studies. Therefore, this study applied a fixed voltage direct current field on an aged electroplating contaminated clayed soil, with a special interest in the direct or indirect influence of Cr(VI) on the electro-migration of other coexisting metals. After 353 h electrokinetic process, 81% of Zn, 53% of Ni and 22% of Cu in the original soil were electro-migrated into the electrolyte, and most of the remaining concentrated near the cathode. The Cr(VI) oxidized some soil organic matter along its migration pathway, with a pronounced reaction occurred near the anode at low pHs. The resulting Cr(III) reversed its original movement, and migrated towards the cathode, leading to the occurrence of a second Cr concentration peak in the soil. Metal species analyses showed that the amount of metals bound to soil organic matter significantly decreased, while a substantial increase in the Cr species bound to Fe/Mn (hydro-)oxides was observed, suggesting an enhancement of cationic metal electro-migration by the reduction of Cr(VI) into Cr(III). However, the Cr(VI) may form some stable lead chromate precipitates, and in turn demobilize Pb in the soil, as the results showed a low Pb removal and an increase in its acid-extractable and residual fractions after electrokinetic remediation.     

Simultaneous extraction of Cr(VI) and Cu(II) from humic acid with new synthesized EDTA derivatives

Soil washing is one of the few permanent treatment alternatives for removing metal contaminants. Ethylenediaminetetraacetic acid and its salts (EDTA) is very effective at removing cationic metals and has been utilized globally. However it is ineffective for anionic metal contaminants or metals bound to soil organic matter. The simultaneous removal of cationic and anionic metal contaminants by soil washing is difficult due to differences in their properties. The present study evaluated the potential of a washing process using two synthesized EDTA-derivatives, C₆HEDTA (2,2′-((2-((carboxymethyl)(2-(hexanoyloxy)ethyl)amino)ethyl)azanediyl)diacetic acid) and C₁₂HEDTA (2,2′-((2-((carboxymethyl) (2-(dodecanoyloxy)ethyl)amino)ethyl)azanediyl)diacetic acid), which consist of a hydrophilic polycarboxylic moiety and a hydrophobic moiety with a monoalkyl ester group. A series of equilibrium batch experiments at room temperature were conducted to investigate the efficacy of C₆HEDTA and C₁₂HEDTA as extractants for both oxyanion Cr(VI) and cationic Cu(II). Results showed that either C₆HEDTA or C₁₂HEDTA can extract both Cr(VI) and Cu(II) from humic acid simultaneously. However, C₆HEDTA was less effective for Cr(VI) probably because it has no surface activities to increase solubility of humic acid, like C₁₂HEDTA. Extraction of Cr(VI) was mainly attributed to the decreased surface tension and enhanced solubility of organic matter. Extraction of Cu(II) was attributed to both the Cu(II) chelation and enhanced solubility of humic acid. It was demonstrated that the hydrophilic polycarboxylic moiety of C₁₂HEDTA chelates cations while the monoalkyl ester group produces surface active properties that enhance the solubility of humic acid.     

锌粉对1,2,4-三氯苯的脱氯性能

采用锌粉对1,2,4-三氯苯（1,2,4-TCB）进行了脱氯的研究。实验结果表明,在40mL质量浓度为22.94m g/L的1,2,4-TCB水溶液中加入1.0g锌粉,反应24h时,1,2,4-TCB的还原率可达94.6%;反应16h时,试样中的Cl-浓度约为1,2,4-TCB完全脱氯所得Cl-理论浓度的30%;锌粉还原1,2,4-TCB的反应能在较宽的pH范围内进行,弱碱性条件下的脱氯效果最好,1,2,4-TCB的还原率达70%。     

铁炭微电解法处理拉开粉废水的研究

就铁炭微电解法处理拉开粉废水的工艺参数及其处理效果进行了试验研究 ,采用絮凝沉淀 酸化微电解 中和沉淀流程 ,拉开粉和CODCr的总去除率可分别达到 87.7%和 83.4 %。     

高压离线侧喷脉冲袋式除尘技术在水泥磨上的应用

以新疆天山水泥股份有限公司一分厂1水泥磨除尘系统技术改造为实例,阐述了获1993年国家环保最佳实用技术推广的LCPM型高压离线侧喷脉冲袋除尘器在水泥磨系统的应用及产生的效果。     

Simultaneous determination of p-arsanilic acid and roxarsone in feed by liquid chromatography-hydride generation online coupled with atomic fluorescence spectrometry

A novel, simple and sensitive liquid chromatography-hydride generation online coupled with atomic fluorescence spectrometry (LC-HG-AFS) method was developed for simultaneous determination of p-arsanilic acid (p-ASA) and roxarsone in feed. 20% Methanol aqueous was used as extraction reagent, after preprocessing samples by ultrasonic oscillation, then injected into the chromatography Waters symmetry shield RP18 analytical column (150mm x 4.6mm, 5 microm), finally detected by an atomic fluorescence spectrometer. The calibration curves of analyses were linear over a range of concentrations (0.2-4mg L-1 and the correlation coefficients were higher than 0.9990. The limits of detection were 0.2 mg L-1. The method has been validated by linearity, precision and recovery. p-ASA and roxarsone in feed can be successfully and simultaneously determined using the developed method without a tedious pretreatment procedure.