Effects of decadal exposure to interacting elevated CO2 and/or O3 on paper birch (Betula papyrifera) reproduction

We studied the effects of long-term exposure (nine years) of birch (Betula papyrifera) trees to elevated CO(2) and/or O(3) on reproduction and seedling development at the Aspen FACE (Free-Air Carbon Dioxide Enrichment) site in Rhinelander, WI. We found that elevated CO(2) increased both the number of trees that flowered and the quantity of flowers (260% increase in male flower production), increased seed weight, germination rate, and seedling vigor. Elevated O(3) also increased flowering but decreased seed weight and germination rate. In the combination treatment (elevated CO(2)+O(3)) seed weight is decreased (20% reduction) while germination rate was unaffected. The evidence from this study indicates that elevated CO(2) may have a largely positive impact on forest tree reproduction and regeneration while elevated O(3) will likely have a negative impact.     

Evaluation of bisphenol A levels in Nigerian thermal receipts and estimation of daily dermal exposure

Environmental Science and Pollution Research - Bisphenol A (BPA) is a high production volume chemical that has wide industrial applications, especially as a color developer in thermal papers. The...     

Spatial distribution of hexazinone and metabolites in a luvisolic soil

Abstract

The spatial distribution of hexazinone and two primary metabolites were measured in forest soil for two years following the aerial application of a granular formulation, PRONONE 10G, in northern Alberta. Residues were quantified using solid‐phase extraction and capillary gas chromatography. Initial deposition rates of two hexazinone treatments averaged 2.3 ± 0.5 and 4.1 ± 0.8 kg/ha for each triplicated plots. One year after application, residues of hexazinone averaged 0.25 ± 0.09 and 0.40 ± 0.02 kg/ha in 2.3 and 4.1 kg/ha treatment, respectively, in the 0–10 cm surface soil; and were distributed vertically in soil depths of 0–10, 10–20, and 20–30 cm at ratios of 10:11:2 and 10:5:2, respectively, in 2.3 and 4.1 kg/ha treatment. Metabolites A and B amounted to 15 and 30% of hexazinone, respectively. Two years after application, the vertical movement of hexazinone in soil was quantifiable to the 40‐cm depth in both 2.3‐ and 4.1‐kg/ha treatment plots. Trace amounts of hexazinone were detected at 130 cm only in the 2.3‐kg/ha plot, which is likely due to the more freely downward movement of hexazinone to deeper horizons along decayed root channels.     

The identification of three previously unreported lindane metabolites from mammals

Previously unreported metabolites from the urine of rats treated with lindane have been identified as configurational isomers of 2,4,5,6- and 2,3,4,6-tetrachloro-2-cyclohexen-1-ol. In addition, an intermediate metabolite from the incubation of lindane with liver preparations, under N₂, has been identified as the configurational isomer γ-3,4,5,6-tetrachlorocyclohex-1-ene. The pathways leading to these metabolites appear to have an important role in the metabolism of lindane by mammals.     

Serum concentrations of selected organochlorine pesticides in a Lebanese population and their associations to sociodemographic,anthropometric and dietary factors: ENASB study

Organochlorine pesticides (OCPs) were banned by the Stockholm Convention many years ago; however, they are still detected in the environment due to their high persistence, their current illegal use, and their import from countries where they have not been banned. We evaluated the serum concentrations of selected OCPs (hexachlorobenzene (HCB), β-hexachlorocyclohexanes (β-HCH), p,p′-dichlorodiphenyltrichloroethane (DDT) and its metabolite p,p′-dichlorodiphenyldichloroethylene (DDE) in a sample of Lebanese adults using gas chromatography coupled to an ion trap mass spectrometer detector. The mean concentrations of HCB, β-HCH, DDT, and DDE were 7.1, 8.6, 2.1, and 18.9 ng/g of lipids, respectively, and the major contributor among the four OCPs was DDE. The OCP levels in the present study were in general lower than the values observed in several countries worldwide and their concentrations at the 95th percentile were lower than the biomonitoring equivalents (BEs) excluding any appreciable health risk. We observed an inverse association between HCB concentrations and body mass index (BMI) as well as HCB, β-HCH, and DDE levels, and smoking habits. Milk consumption however was positively associated with an increased serum level of β-HCH. This study, which was the first to investigate OCP serum levels in a Lebanese population, provides a baseline to which future measurements can be compared.     

Fate of PCBs, PAHs and their source characteristic ratios during composting and digestion of source-separated organic waste in full-scale plants

Composting and digestion are important waste management strategies. However, the resulting products can contain significant amounts of organic pollutants such as polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs). In this study we followed the concentration changes of PCBs and PAHs during composting and digestion on field-scale for the first time. Concentrations of low-chlorinated PCBs increased during composting (about 30%), whereas a slight decrease was observed for the higher chlorinated congeners (about 10%). Enantiomeric fractions of atropisomeric PCBs were essentially racemic and stable over time. Levels of low-molecular-weight PAHs declined during composting (50-90% reduction), whereas high-molecular-weight compounds were stable. The PCBs and PAHs concentrations did not seem to vary during digestion. Source apportionment by applying characteristic PAH ratios and molecular markers in input material did not give any clear results. Some of these parameters changed considerably during composting. Hence, their diagnostic potential for finished compost must be questioned.     

Energy Choices and Public Policy

The subject of energy choices and public policy is one that has interested me at a professional level. The outlook for energy supply for Americans is uncertain. Will the OPEC crank the per barrel price of world oil up again this fall by three or four dollars? We don’t know. Will the cost of finding and developing new domestic oil reserves continue to rise, and will the domestic production continue to fall as it has been doing since 1970? We don’t know. Would regulating the price of old oil and natural gas entering into interstate commerce bring forth significantly increased supplies? We don’t know. The chances for reducing oil consumption—or at least checking the rate of increase—are equally uncertain. Will still higher prices, brought on by whatever means, cause people and industries to use less oil? We don’t know. Will demand shift away from oil and natural gas to cheaper, more plentiful energy sources? We don’t know. Will penalties, taxes, or exhortations get the motor vehicle industry to produce more gasoline efficient cars and trucks? We don’t know. We may not even get a chance to try. Will new, less energy intensive lifestyles take over? We don’t know.     

In situ remediation of soils contaminated with toxic metal ions using microwave energy

Following onto our work on the in situ remediation of soils contaminated with PAH's, PCB's and other polychlorinated organic compounds using microwave energy, we now report a preliminary investigation on the in situ remediation of soils contaminated with toxic metal ions: Cd(II), Mn(II), Th(IV), Cr(III) and mainly Cr(VI). The soil is partially vitrified in the process, and extraction with hot (70 degrees C) 35% nitric acid for 4.5 h leads to the recovery of very small amounts of the metals which had been spiked into the clean soil: Cd, Mn, and Cr(III) are completely immobilized (unextractable), Th is mostly unextractable, and Cr(VI) partially extractable at very high levels of spiking, but almost completely unextractable using the US EPA Toxicity Characteristic Leaching Procedure. This suggests that contaminated soils which are not going to be used for agricultural purposes can be remediated safely to preset depths without fear of the toxic metal ions leaching out for a long time.     

A novel two-dimensional model for colloid transport in physically and geochemically heterogeneous porous media

A two-dimensional model for colloid transport in geochemically and physically heterogeneous porous media is presented. The model considers patchwise geochemical heterogeneity, which is suitable to describe the chemical variability of many surficial aquifers with ferric oxyhydroxide-coated porous matrix, as well as spatial variability of hydraulic conductivity, which results in heterogeneous flow field. The model is comprised of a transient fluid flow equation, a transient colloid transport equation, and an equation for the dynamics of colloid deposition and release. Numerical simulations were carried out with the model to investigate the colloid transport behavior in layered and randomly heterogeneous porous media. Results demonstrate that physical and geochemical heterogeneities markedly affect the colloid transport behavior. Layered physical or geochemical heterogeneity can result in distinct preferential flow paths of colloidal particles. Furthermore, the combined effect of layered physical and geochemical heterogeneity may result in enhanced or reduced preferential flow of colloids. Random distribution of physical heterogeneity (hydraulic conductivity) results in a random flow field and an irregularly distributed colloid concentration profile in the porous medium. Contrary to random physical heterogeneity, the effect of random patchwise geochemical heterogeneity on colloid transport behavior is not significant. It is mostly the mean value of geochemical heterogeneity rather than its distribution that governs the colloid transport behavior.     

Photochemistry of 1-nitro-2-phenylnaphthalene available to the environment

Photolysis (254 nm, 72h) of 1-nitro-2-phenylnaphthalene $\text{1}$ in methanol gave 2-phenyl-1,4-naphthoquinone-4-monoxime $\text{2}$, 2,2′-diphenyl-4,4′-binaphth-1,1′-diol $\text{3}$ and 2,2′-diphenyl-4,4′-binaphth-1,1′-dione $\text{4}$. Straightforward reactions available to the environment account for the formation of the products: (a) isomerisation of the nitro compound into a nitrite ester followed by either (a) migration of the nitroso group and isomerisation into the oxime $\text{2}$ or (b) oxidative coupling and solvolysis into the binaphthol $\text{3}$ and followed by oxidation into the binaphthone $\text{4}$.