Sampling of ethylene glycol and ethylene glycol derivatives in work-room air using Amberlite XAD resins

The porous polymers Amberlite XAD-2 and XAD-7 were evaluated for the sampling of ethylene glycol, 2-methoxyethanol, 2-ethoxyethanol, 2-butoxyethanol and 2-ethoxyethyl acetate in work-room air. Using diethyl ether desorption, these adsorbents were found excellent for the compounds studied.     

Statistical analysis of heavy metal data from municipal waste incineration residues

Heavy Metal data from a measurement program at a municipal incinerator in Vienna, Austria are analysed. The experimental design had a nested structure, and analysis of variance is used to break down the total variability into several components; (1) variability between mean hourly concentrations, (2) variability between mean sample concentrations within intervals of an hour and (3) variability due to “measurement” errors. Results of a pre-experiment show, that if grab samples are taken, within hour variation is dominant. The results of analysis of variance were used to calculate an optimal number of samples, which ensure a predetermined accuracy for the mean concentrations. In two main measuring periods with different incinerated waste types, slag and fly ash (ESP dust and boiler ash) data are produced and analysed. For both slag and fly ash, significant differences in measures of location and dispersion between the data sets of the main experiment are found. This proves, that differences in the chemical set up of waste can be detected via incineration residues.     

Analysis of gaseous diisocyanates in air using chemosorption sampling

A sampling procedure for 2,4- and 2,6-toluenediisocyanate (TDI) and 4,4′-diphenylmethane diisocyanate (MDI) in the range 0.007-0.7 mg/m³ in a 15 L air sample is described. The sampling is performed with 9-(N-methylaminomethyl)-anthracene (MAMA) adsorbed on a solid sorbent, Amberlite XAD-2. The recoveries are 80–100% in this chemosorption reaction. The urea derivatives are desorbed with N,N-dimethylformamide and analysed by high performance liquid chromatography (HPLC). Samples and prepared chemosorption tubes are stable for at least two weeks if stored in the dark. To complete the investigation, field measurements of TDI were performed in an industrial atmosphere.     

Influence of air humidity on sampling efficiency of some solid adsorbents used for sampling organics from work-room air

The influence of air humidity on the sampling efficiency of Amberlite XAD porous polymers and activated charcoal was studied by determining the recovery of various organics at 20% and 85% relative humidity. The sampling efficiency of XAD-7 was found to decrease with increasing relative humidity, while the sampling efficiency of XAD-2 and activated charcoal was relatively unaffected for the compounds studied. Activated charcoal had a greater capacity than Amberlite XAD for several types of compounds, however.     

Relationship between release of nitric oxide and CO2 and their dependence on oxidation reduction potential in wastewater treatment

Nitric oxide (NO) is an intermediate of denitrification process and can be produced by denitrifiers, nitrifiers and other bacteria. In our experiments we measured the dynamic flow of NO depending on oxidation reduction potential (ORP). Different ORP-ranges were related to various carbon loading stages in the wastewater treatment pilot plant. Nitrification and denitrification were achieved by a sequence of aeration and non-aeration periods. Our measurements show that different carbon loading conditions (low feed, balanced and overloaded conditions) did not change the range of the mixing ratio of NO emissions when the aeration conditions like air-flow and temperature were kept constant. Minimum and maximum NO mixing ratios were 34.7 and 91.8 ppbv; 52.3 and 91.3 ppbv; 57.6 and 109 ppbv for low feed, balanced and overloaded conditions, respectively. The curve of the NO graph relied on nitrification/denitrification dynamics. The dependence of NO release on different ORP and CO2-release during the various conditions are shown. Longer aeration times resulted in an increased release of gaseous NO. The net-release of NO g(-1) nitrogen removed was between 0.014% and 0.028%. The NO fluxes to the air were observed between 8.3 and 14.9 mg m(-2) d(-1) NO. The major release occurred during high aeration periods whereas the concentration of dissolved [NOaq] in the wastewater was less than 0.05% of the gaseous release due to very low solubility of the NO.     

The use of Littorina littorea for tributyltin (TBT) effect monitoring - Results from the German TBT survey 1994/1995 and laboratory experiments

Field investigations and laboratory experiments were performed to test the applicability of the intersex phenomenon in Littorina littorea for biological TBT-effect monitoring and to give further insights into toxicological aspects of intersex development. The intensity of the phenomenon is correlated with the degree of TBT contamination in the environment. Statistically highly significant correlations of biological indices and TBT concentrations in tissue and sediment exist. Intersex can be induced only in juvenile and sexually immature females and its intensity depends on the ontogenetic stage of development during TBT exposure. For the first time, malformations in male periwinkles closely related to the TBT contamination can be described; the reduction of male mamilliform penial glands shows highly significant correlations to TBT concentrations in tissues. The intersex phenomenon in Littorina littorea is proposed for a biological TBT-effect monitoring in those areas where the dogwhelk Nucella lapillus, as the more sensitive species in European surveys, is absent. The intersex index (ISI) as the mean value of the intersex stages in a sample should be used as the most sensitive biological parameter for the assessment of the TBT contamination in Littorina littorea.