Proposed guidelines for diagnosis of chromosome mosaicism in amniocytes based on data derived from chromosome mosaicism and pseudomosaicism studies

Currently, accepted protocol which has been developed at the Prenatal Diagnosis Laboratory of New York City (PDL) requires that when a chromosome abnormality is found in one or more cells in one flask, another 20–40 cells must be examined from one or two additional flasks. Chromosome mosaicism is diagnosed only when an identical abnormality is detected in cells from two or more flasks. In a recent PDL series of 12 000 cases studied according to this protocol, we diagnosed 801 cases (6.68 per cent) of single-cell pseudomosaicism (SCPM), 126 cases (1.05 per cent) of multiple-cell pseudomosaicism (MCPM), and 24 cases (0.2 per cent) of true mosaicism. Pseudomosaicism (PM) involving a structural abnormality was a frequent finding (2/3 of SCPM and 3/5 of MCPM), with an unbalanced structural abnormality in 55 per cent of SCPM and 24 per cent of MCPM. We also reviewed all true mosaic cases (a total of 50) diagnosed in the first 22000 PDL cases. Of these 50 cases, 23 were sex chromosome mosaics and 27 had autosomal mosaicism; 48 cases had numerical abnormalities and two had structural abnormalities. Twenty-five cases of mosaicism were diagnosed in the first 20 cells from two flasks, i.e., without additional work-up, whereas the other 25 cases required extensive work-up to establish a diagnosis (12 needed additional cell counts from the initial two culture flasks; 13 required harvesting a third flask for cell analysis). Our data plus review of other available data led us to conclude that rigorous efforts to diagnose true mosaicism have little impact in many instances, and therefore are not cost-effective. On the basis of all available data, a work-up for potential mosaicism involving a sex chromosome aneuploidy or structural abnormality should have less priority than a work-up for a common viable autosomal trisomy. We recommend revised guidelines for dealing with (1) a numerical versus a structural abnormality and (2) an autosomal versus a sex chromosome numerical aneuploidy. Emphasis should be placed on autosomes known to be associated with phenotypic abnormalities. These new guidelines, which cover both flask and in situ methods, should result in more effective prenatal cytogenetic diagnosis and reduced patient anxiety.     

Sampling and analysis of particulate and gaseous polycyclic aromatic hydrocarbons from coal tar sources in the working environment

A sampling method for polycyclic aromatic hydrocarbons (PAH) in workplace atmospheres using a standard glass fiber filter with a back-up section of Amberlite XAD-2 is described. Filters and XAD are solvent-desorbed and, without further clean-up, the solutions are submitted to high performance liquid chromatographic analysis using fluorimetric detection. Recovery of PAH from XAD-2 was studied, and was found to be in the range 80–100%. The sampling method was evaluated in a coke plant, an aluminium plant and in a creosote impregnating plant. The method described is rapid and sensitive for the determination of the most important workplace PAH, and accounts for both particulate and gaseous PAH.     

A new environmental chamber for evaluation of gas-phase chemical mechanisms and secondary aerosol formation

A new state-of-the-art indoor environmental chamber facility for the study of atmospheric processes leading to the formation of ozone and secondary organic aerosol (SOA) has been constructed and characterized. The chamber is designed for atmospheric chemical mechanism evaluation at low reactant concentrations under well-controlled environmental conditions. It consists of two collapsible 90 m³ FEP Teflon film reactors on pressure-controlled moveable frameworks inside a temperature-controlled enclosure flushed with purified air. Solar radiation is simulated with either a 200 kW Argon arc lamp or multiple blacklamps. Results of initial characterization experiments, all carried out at 300–305 K under dry conditions, concerning NO_x and formaldehyde offgasing, radical sources, particle loss rates, and background PM formation are described. Results of initial single organic–NO_x and simplified ambient surrogate–NO_x experiments to demonstrate the utility of the facility for mechanism evaluation under low NO_x conditions are summarized and compared with the predictions of the SAPRC-99 chemical mechanism. Overall, the results of the initial characterization and evaluation indicate that this new environmental chamber can provide high quality mechanism evaluation data for experiments with NO_x levels as low as 2 ppb, though the results indicate some problems with the gas-phase mechanism that need further study. Initial evaluation experiments for SOA formation, also carried out under dry conditions, indicate that the chamber can provide high quality secondary aerosol formation data at relatively low hydrocarbon concentrations.     

Dioxin removal in “energy from waste plants” - comparison of air pollution control methods

The graph below shows the emitted dioxin - equivalents (Eadon) in grams per year in flue gas from municipal solid waste incinerators with various air pollution control methods for plants of capacity of 200 000 ton municipal solid waste (MSW) per year.

Full-size image (15K)

With optimized combustion and an effective air pollution control system the emissions of dioxins can be kept very low (concentrations below 0.1 ng/m³n).

With a very effective air pollution control system the total emission from all Swedish MSW-incinerators burning approximately 1.5 Mton/year will by 1990 be below 2 g/year - a drastic reduction from approximately 15 g today. As the total dioxin - equivalent emission to the environment in Sweden in the year 1987 was almost 500 g we see that municipal waste incineration really is on the way to solve their dioxin problem.     

The effects of component dimensions on heat transfer and pressure loss in shell and tube heat exchangers

In this study, the effects of geometric properties such as baffle spacing, baffle cut, sealing strips, gaps between heat exchanger components, number of tubes and tube passes have been investigated for shell and tube heat exchangers (STHE). For this purpose, geometrical dimensions and data of a specific heat exchanger (HE) used in an industrial application have been obtained. The HTRI Xchanger Suite Educational software was utilized to analyze the reference HE, to verify the results of the software and the output temperatures of the fluids, the shell side heat transfer coefficient (HTC) and the pressure loss (PL) values were compared with the experimental data. After confirming that the results of the software were within the acceptable deviation values, the geometric dimensions of the reference design were changed and new analyzes were carried out to examine the effects of several dimension options on the performance of STHE. Results were discussed in a detailed and comprehensive manner via curves.