Butyltin levels in several Portuguese coastal areas

This work aimed to report present levels (2007–2008 sampling) of tri- (TBT), di- (DBT), and monobutyltin (MBT) in surface sediments from 11 Portuguese coastal sites and discuss the evolution of BTs contamination in the last two decades. All the samples revealed quantifiable values of TBT, DBT, and MBT with total butyltin concentrations between 1 and 565 ng/g (of Sn in dry sediment). Maximum level of TBT, 66 ng/g, was observed in Sado estuary, at Lisnave site, in the proximity of a big shipyard. MBT decreased site by site by the same order as DBT and TBT did, but its concentrations were much higher in many cases, denoting that TBT contamination was much higher in the past. A comparison with the available previous data confirmed a marked decrease of TBT contamination all over the last years, indicating that the main sources of TBT in Portuguese coastwise stopped effectively.     

Effect of sampling effort and sampling frequency on the composition of the planktonic crustacean assemblage: a case study of the river Danube

Although numerous studies have focused on the seasonal dynamics of riverine zooplankton, little is known about its short-term variation. In order to examine the effects of sampling frequency and sampling effort, microcrustacean samples were collected at daily intervals between 13 June and 21 July of 2007 in a parapotamal side arm of the river Danube, Hungary. Samples were also taken at biweekly intervals from November 2006 to May 2008. After presenting the community dynamics, the effect of sampling effort was evaluated with two different methods; the minimal sample size was also estimated. We introduced a single index (potential dynamic information loss; to determine the potential loss of information when sampling frequency is reduced. The formula was calculated for the total abundance, densities of the dominant taxa, adult/larva ratios of copepods and for two different diversity measures. Results suggest that abundances may experience notable fluctuations even within 1 week, as do diversities and adult/larva ratios.     

Identification and evaluation of hydrogeochemical processes on river Cooum, South India

The salient features of the river water chemistry and the seasonal variations on the individual chemical parameter were evaluated and characterized. The order of abundance of the ions in the water is determined for both seasons. The contribution of chemical weathering to the water chemistry has been determined using the (Ca²⁺ + Mg²⁺)/(Na⁺ + K⁺) ratio, ternary, and Gibb’s diagrams. The results show that the chemical composition of river water during premonsoon is controlled mainly by evaporation–crystallization, while in the postmonsoon, the rock–water interaction dominates. The unique characteristic of the river water is the linear relationship among the principal ions. Hydrochemical characteristics of ions in the water were studied using 1:1 equiline diagrams. The nature of the water samples was determined using the piper diagram. The influence of trace metals on the chemical composition and the quality of the river water in the study area has been assessed using Wilcox and US Salinity Laboratory diagrams.     

Use of preserved museum fish to evaluate historical and current mercury contamination in fish from two rivers in Oklahoma, USA

We examined the effects of a commonly used preservation technique on mercury concentration in fish tissue. After fixing fish muscle tissue in formalin followed by preservation in isopropanol, we found that mercury concentration in fish muscle tissue increased by 18%, reaching an asymptote after 40 days. We used formalin–isopropanol-preserved longear sunfish (Lepomis megalotis) from the Sam Noble Oklahoma Museum of Natural History to examine historical changes and predict current mercury concentrations in fish from two rivers in southeastern Oklahoma. Glover River was free-flowing, while Mountain Fork River was impounded in 1970 and a coldwater trout fishery was established upstream from the collection site in 1989. Mercury concentrations in longear sunfish from Glover River showed no historical changes from 1963 to 2001. Mercury concentrations in longear sunfish from Mountain Fork River showed no change from 1925 to 1993 but declined significantly from 1993 to 2003. We also compared mercury concentrations of the most recently collected longear sunfish in the museum to mercury concentrations of unpreserved fish collected from the rivers in 2006. Concentrations of mercury in museum fish were not significantly different from mercury concentrations in unpreserved fish we collected from the rivers. Our study indicates that preserved museum fish specimens can be used to evaluate historical changes and predict current levels of mercury contamination in fish.     

Assessing the water quality index of water treatment plant and bore wells, in Delhi, India

Water quality monitoring exercise was carried out with water quality index (WQI) method by using water characteristics data for bore wells and a water treatment plant in Delhi city from December 2006 to August 2007. The water treatment plant received surface water as raw water, and product water is supplied after treatment. The WQI is used to classify water quality as excellent, good, medium, bad, and very bad. The National Sanitation Foundation WQI procedure was used to calculate the WQI. The index ranges from 0 to 100, where 100 represents an excellent water quality condition. Water samples were collected monthly from a bore well in Nehru Camp (site 1), a bore well in Sanjay Gandhi pumping station (site 2), and water treatment plant in Haiderpur (site 3). Five parameters were analyzed, namely, nitrate, pH, total dissolved solids, turbidity, and temperature. We found that the WQI was around 73–80 in site 3, which corresponds to “good,” and it decreased to 54.32–60.19 and 59.93–70.63 in site 1 and site 2, respectively, indicating that these bore wells were classified as “medium” quality.     

An assessment of heavy metal contamination in surface sediment using statistical analysis

The distribution and accumulation of heavy metals in the sediments, especially those nearest of wastewater discharges of south of Spain, were investigated. Sediment samples from 14 locations were collected and characterised for metal content (e.g. Ni, Cu, Zn, Cr, Pb, Mn, Cd and Hg), organic carbon, total nitrogen, total phosphorous, n-hexane-extractable material, carbonates and grain size. Concentration data were processed using correlation analysis and factor analysis. The correlation analysis of concentrations data showed important positive correlations among organic carbon, total phosphorus, Cu, Zn, Cd and Hg, otherwise weak correlations among Mn, Cr, Ni and CO₃ ^2???, indicating that these metals have complicated geochemical behaviours. The use of statistical factor analysis also confirmed these results. Sediments pollution assessment was carried out using geoaccumulation and metal pollution indexes (MPI₈). The results revealed that sediments of Cádiz bay and Sancti Petri channel were uncontaminated with the studied metals.     

Accumulation of total trace metals due to rapid urbanization in microtidal zone of Pallikaranai marsh, South of Chennai, India

The article presents the results for enrichment of total trace metals (TTMs) from Pallikaranai salt marsh in South Chennai, a metropolis on the southeast coast of India. TTMs Fe, Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd, Sr, V, and Hg along with sediment texture, OC, and CaCO₃ were analyzed in 36 surface sediments collected during August 2008 to recognize and observe the input of TTMs in the marsh from various sources in the city limits. In view of the rapid urbanization and industrialization in Chennai City, especially on the southern side, uncontrolled input of sewage, garbage, and industrial effluents into the Pallikaranai marsh land, the elevated concentrations are not surprising. The level of enrichment of TTMs has also increased by 20% to 60% for most of the elements when compared with all other ecosystems in the world as well as the nearby area. The results also indicate that the marshy region is more heavily contaminated with Cd, Hg, Cr, Cu, Ni, Pb, and Zn than other regions on the southeast coast of India. The Enrichment Factor, Contamination Factor, and I _geo indexes are calculated, and these values are useful to assess the degree of pollution in sediments. The spatial distributions of TTMs are also controlled by other factors like geochemical, precipitation, and flocculation of particulate substances in the marsh. The results of the present study suggest the need for a regular monitoring and management program which will help to improve the quality of Pallikaranai pristine marsh land.     

Estimation of pollutant partition in sandy soils with different water contents

The objectives of this work were: (1) to identify an isotherm model to relate the contaminant contents in the gas phase with those in the solid and non-aqueous liquid phases; (2) to develop a methodology for the estimation of the contaminant distribution in the different phases of the soil; and (3) to evaluate the influence of soil water content on the contaminant distribution in soil. For sandy soils with negligible contents of clay and natural organic matter, contaminated with benzene, toluene, ethylbenzene, xylene, trichloroethylene (TCE), and perchloroethylene (PCE), it was concluded that: (1) Freundlich’s model showed to be adequate to relate the contaminant contents in the gas phase with those in the solid and non-aqueous liquid phases; (2) the distribution of the contaminants in the different phases present in the soil could be estimated with differences lower than 10% for 83% of the cases; and (3) an increase of the soil water content led to a decrease of the amount of contaminant in the solid and non-aqueous liquid phases, increasing the amount in the other phases.     

Risk of boron and heavy metal pollution from agro-industrial wastes applied for plant nutrition

In this study, the effects of various agro-industrial wastes were investigated when applied to soil alone or in combination with chemical fertilizers, regarding the risks of boron and heavy metal pollution of soils and plants. Nine combinations of production residues from various agro-industries, urban wastes, and mineral fertilizers were applied to potatoes in a field experiment. The content of available boron in the soil differed significantly (p < 0.05) among the applications. Generally, B values were found to be slightly higher when soapstock, prina, and blood were used alone or in combination. Although total Co, Cd, and Pb contents of soils showed no significant differences between the applications, Cr content differed significantly (p < 0.05). No pollution risk was observed in soil in respect to total Co, Cd, Pb, and Cr contents. The amount of boron and heavy metals in leaves showed no significant differences among the applications. Cobalt, Cd, and Pb in leaves were at normal levels whereas Cr was slightly above normal but well under the critical level. Boron was low in tubers and varied significantly between applications such as Co and Cd. The Co content of tubers was high, Cd and Cr contents were below average, and Pb content was between the given values. Some significant correlations were found between soil characteristics and the boron and heavy metal content of soil, leaves, and tubers.     

Determination of total Cr in wastewaters of Cr electroplating factories in the I.organize industry region (Kayseri, Turkey) by ICP-AES

The wastewater pollution in industrial areas is one of the most important environmental problems. Heavy metal pollution, especially chromium pollution in the wastewater sources from electroplating, dyeing, and tannery, has affected the life on earth. This pollution can affect on all ecosystems and human health directly or by food chain. Therefore, the determination of total chromium in this study is of great importance. In this study, accurate, rapid, sensitive, selective, simple, and low-cost technique for the direct determination of total Cr in wastewater samples collected from the some Cr electroplating factories in March 2008 by inductively coupled plasma-atomic emission spectrometry has been developed. The analysis of a given sample is completed in about 15 min by this technique applied. As the result of the chromium analysis, the limit of quantification for the total Cr were founded to be over the limit value (0.05 mg L^???1; WHO, EPA, TSE 266, and inland water quality classification) as 1,898.78 ± 0.34 mg/L at station 1 and 3,189.02 ± 0.56 mg/L at station 2. The found concentration of total Cr has been determined to be IV class quality water according to the inland water classification. In order to validate the applied method, recovery studies were performed.