Understanding global sea levels: past, present and future

The coastal zone has changed profoundly during the 20th century and, as a result, society is becoming increasingly vulnerable to the impact of sea-level rise and variability. This demands improved understanding to facilitate appropriate planning to minimise potential losses. With this in mind, the World Climate Research Programme organised a workshop (held in June 2006) to document current understanding and to identify research and observations required to reduce current uncertainties associated with sea-level rise and variability. While sea levels have varied by over 120 m during glacial/interglacial cycles, there has been little net rise over the past several millennia until the 19th century and early 20th century, when geological and tide-gauge data indicate an increase in the rate of sea-level rise. Recent satellite-altimeter data and tide-gauge data have indicated that sea levels are now rising at over 3 mm year⁻¹. The major contributions to 20th and 21st century sea-level rise are thought to be a result of ocean thermal expansion and the melting of glaciers and ice caps. Ice sheets are thought to have been a minor contributor to 20th century sea-level rise, but are potentially the largest contributor in the longer term. Sea levels are currently rising at the upper limit of the projections of the Third Assessment Report of the Intergovernmental Panel on Climate Change (TAR IPCC), and there is increasing concern of potentially large ice-sheet contributions during the 21st century and beyond, particularly if greenhouse gas emissions continue unabated. A suite of ongoing satellite and in situ observational activities need to be sustained and new activities supported. To the extent that we are able to sustain these observations, research programmes utilising the resulting data should be able to significantly improve our understanding and narrow projections of future sea-level rise and variability.     

Refinement of the density-modified displacement method for efficient treatment of tetrachloroethene source zones

A novel method to remediate dense nonaqueous phase liquid (DNAPL) source zones that incorporates in situ density conversion of DNAPL via alcohol partitioning followed by displacement with a low interfacial tension (IFT) surfactant flood has been developed. Previous studies demonstrated the ability of the density-modified displacement (DMD) method to recover chlorobenzene (CB) and trichloroethene (TCE) from heterogeneous porous media without downward migration of the dissolved plume or free product. However, the extent of alcohol (n-butanol) partitioning required for in situ density conversion of high-density NAPLs, such as tetrachloroethene (PCE), could limit the utility of the DMD method. Hence, the objective of this study was to compare the efficacy of two n-butanol delivery approaches: an aqueous solution of 6% (wt) n-butanol and a surfactant-stabilized macroemulsion containing 15% (vol) n-butanol in water, to achieve density reduction of PCE-NAPL in two-dimensional (2-D) aquifer cells. Results of liquid-liquid equilibrium studies indicated that density conversion of PCE relative to water occurred at an n-butanol mole fraction of 0.56, equivalent to approximately 5 ml n-butanol per 1 ml of PCE when in equilibrium with an aqueous solution. In 2-D aquifer cell studies, density conversion of PCE was realized using both n-butanol preflood solutions, with effluent NAPL samples exhibiting density reductions ranging from 0.51 to 0.70 g/ml. Although the overall PCE mass recoveries were similar (91% and 93%) regardless of the n-butanol delivery method, the surfactant-stabilized macroemulsion preflood removed approximately 50% of the PCE mass. In addition, only 1.2 pore volumes of the macroemulsion solution were required to achieve in situ density conversion of PCE, compared to 6.4 pore volumes of the 6% (wt) n-butanol solution. These findings demonstrate that use of the DMD method with a surfactant-stabilized macroemulsion containing n-butanol holds promise as an effective source zone remediation technology, allowing for efficient recovery of PCE-DNAPL while mitigating downward migration of the dissolved plume and free product.     

The multiple pathways of high performing groups: the interaction of social networks and group processes

This study examines how both strong and weak relationship groups (groups with numerous, intense internal friendship ties and few, less intense internal friendship ties respectively) achieve high performance when utilizing strategies that capitalize on the strengths and minimizing the weaknesses associated with their internal social structure. We examine the interactions of groups' internal friendship networks with their external network structures (external ties) and internal intragroup conflict (constructive controversy). The results of a study using survey, archival and interview data on 35 groups of MBA students indicated that internal friendship networks interacted with constructive controversy and external networks to determine when groups would achieve superior performance. High performing strong relationship groups engaged in greater constructive controversy than low performing strong relationship groups, while constructive controversy appeared to have minimal effect on the performance of weak relationship groups. High performing weak relationship groups had fewer external bridging ties to other groups when compared to low performing weak relationship groups, while external bridging ties appeared to have minimal effect on the performance of strong relationship groups. Copyright © 2006 John Wiley & Sons, Ltd.     

Genotoxic effects and molecular docking of 1,4-dioxane: combined protective effects of trans-resveratrol

Environmental Science and Pollution Research - In this study, the protective effects of trans-resveratrol (t-resv) against 1,4-dioxane-induced toxicity in meristematic cells were investigated. For...     

Zur Entwicklung der medizinischen Wissenschaften in China

Three periods or stages can be recognized in the development of medicine in China. The first one, being the indigenous medical practice, has its own philosophical approach and can therefore not simply be combined with Western medicine. The second period, in which medical missionaries introduced modern medicine was still a time of laissez-faire and pestilence. The third stage was ushered in by the liberation in 1949 and is characterized by the fact that the government no longer regards health as the private affair of the individual but as a task for the whole community. A number of endemic and epidemic diseases were conquered mainly through close cooperation between the population and medical workers. Success must be regarded as in an important part due to land reform and the eradication of famine. Further improvement in health care will depend to a great deal on improvement in living standards and a lessening of population pressure. As family planning meets resistance for economic and other reasons, only specific measures by the state can bring about a change in attitude. The progress in preventive measures is matched by advances in the technical aspects of medicine and especially too in medical education.     

Development of a unique topology for a hard-turning micro-scale machine tool

A micro-scale machine tool (mMT) topology is developed for turning hardened steel bearing components. The topology utilizes the principle of leverage to increase accuracy and stiffness and incorporates decoupling to reduce unwanted motion of the tool. Performance specifications required that the static stiffness is at least 10 N/μm and dynamic stiffness is at least 30 N/μm in all directions. The kinematics for the topology are developed to enable control over the position and orientation of the tool tip. The effect of the topology on rake angle is determined and the topology is adjusted so as to minimize the rake angle variation during the cut. Cutting tests are performed to determine cutting parameters for achieving a low surface roughness and to estimate the accuracy of the machine. Tests show that the hard-turning mMT can achieve surface roughness below 25 nm Ra, diametrical accuracy of 1 μm and peak-to-valley roundness deviation (RONt) below 0.35 μm.     

Prerequisites for learning from accident investigations – A cross-country comparison of national accident investigation boards

In this paper railway accident investigation reports issued by the national accident investigation boards in three Scandinavian countries during a 2-year period have been systematically studied. Content analysis of attributed causes in these reports reveals a considerable emphasis on physical processes, actor activities and equipment (the microlevel). Much less attention is paid to organisational factors (the mesolevel) and conditions related to regulators, associations and government (the macrolevel). This means that lessons will primarily be learned about aspects at the lower of these levels. Interviews show that the factors emphasised in investigation reports typically reflect the competences and experiences of the investigators, i.e. they are inclined to focus on areas of their own expertise. Since failures at the microlevel in many cases merely are symptoms of trouble at higher levels, it is argued that competence among investigators that supplements entirely technical or operational backgrounds are necessary for enabling deeper understanding of the factors leading to accidents. One possible way for achieving this is the creation of multi-modal investigation boards that provide a number of potential advantages, such as increased access to specialist competences that are shared between different sectors. Although a multi-modal approach to some degree has been adopted in all three countries, interviews reveal that these positive effects do not emerge automatically. It can therefore be concluded that multi-modal investigation boards offer a number of possible advantages, but only when these synergies are fully exploited can they provide a potential for more effective learning from accidents.     

Bewertungs- und Darstellungsverfahren

A large number of suitable bioindication methods are available for ecological monitoring. Nevertheless, a deficit still exists in the methods for evaluating and presenting these results. Within the ecological Monitoring Network of Baden-Württemberg, bioindication techniques have been implemented since 1984. A special concept has been developed which enables an integrated evaluation from the partial models investigated. The aim is the development of an “Ecological Quality Map” for Baden-Württemberg through which the environmental pollution situation can be documented from both a regional and a chronological point of view.