Removal of batteries from solid waste using trommel separation

This paper describes the design and testing of a trommel for separation of batteries from solid waste. A trommel is a cylindrical separation device that rotates and performs size separation. It has also been used in areas such as municipal solid waste (MSW) processing, classifying construction and demolition debris, screening mass-burn incinerator ash and compost processing. A trommel has been designed based on size separation to separate household batteries from solid waste, which can then be used as feedstock for alternative applications of solid waste combustion, particularly where the metal content of the product is also a critical parameter, such as the Co-Co process for integrated cement and power production. This trommel has been tested with batches of university office and restaurant wastes against various factors. The recovery efficiency of batteries increases with decreasing inclination angle of the trommel and decreasing rotational speed. A physical characterization of the university solid waste has been performed with a 20-kg sample of the tested waste. It was found that there is a trend of decreasing recovery of batteries with increasing paper composition, and a trend of increasing recovery of batteries with increasing organic materials composition.     

Characteristics of metal enrichment in Deep Bay, Hong Kong

Abstract: Sediment cores, suspended particles and overlying water were collected in Deep Bay, Hong Kong. Enrichment of Zn in surface sediments in the landward direction and the decreasing of exchangeable Cd, Ni and Zn in sediment from the inner bay to the outer bay indicated the influence of anthropogenic pollutants discharged from the riparian runoffs.     

Assessment of personal integrated exposure to fine particulate matter of urban residents in Hong Kong

Metropolitan residents are concerned about their exposure to airborne pollutants. But establishing these exposures is challenging. A compact personal exposure kit (PEK) was developed to evaluate personal integrated exposure (PIE) from time-resolved data to particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) in five microenvironments, including office, home, commuting, other indoor activities (other than home and office), and outdoor activities experienced both on weekdays and weekends. The study was conducted in Hong Kong. The PEK measured PM_2.5, reported location and several other factors, stored collected data, as well as reported the data back to the investigators using global system for mobile communication (GSM) telemetry. Generally, PM_2.5 concentrations in office microenvironment were found to be the smallest (13.0 μg/m³), whereas the largest PM_2.5 concentration microenvironments were experienced during outdoor activities (54.4 μg/m³). Participants spent more than 85% of their time indoors, including in offices, homes, and other public indoor venues. On average, 42% and 81% of the time were spent in homes, which contributed 52% and 79% of PIE (during weekdays and weekends, respectively), suggesting that improvement of air quality in homes may reduce overall exposures and indicating the need for actions to mitigate possible public health burdens in Hong Kong. This study also found that various indoor/outdoor microenvironments experienced by urban office workers cannot be accurately represented by general urban air quality data reported from the regulatory monitoring. Such personalized air quality information, especially while in transit or in offices and homes, may provide improved information on population exposures to air pollution.

Implications: A newly developed personal exposure kit (PEK) was used to monitor PM_2.5 exposure of metropolitan citizens in their daily life. Different microenvironments and time durations caused various personal integrated exposure (PIE). The stationary monitoring method for PIE was also compared and evaluated with PEK. Positive protection actions can be taken after understanding the major contribution to PM_2.5 exposure.     

Monitoring long-term variation of aerosol composition: a dual particle-size approach applied to Hong Kong

The 1990's time series in Hong Kong for various components oftotal suspended particulate matter (TSP) and PM₁₀ have beenanalyzed in order to assess two distinct types of anthropogenicinput. The first of these relates to the immense reclamation andconstruction activities for new developments and airportconstruction. The concentrations of crustal components inPM₁₀ (= TSP – PM₁₀) were found to peak at the time ofthis maximum activity. A second type of anthropogenic input,ambient lead from petrol vehicles, has decreased in Hong Kongand now represents a regional background. Ambient bromine nowarises mainly from the seasalt source.     

The use of oxyhalogen in photocatalytic reaction to remove o-chloroaniline in TiO2 dispersion

Photodecay of o-chloroaniline (o-ClA) in various combinations of UV sources, TiO2, and oxyhalogens was investigated. To improve the conventional photocatalytic process by using UV/TiO2, the addition of oxyhalogens (ClO3(-), BrO3(-) and IO3(-)) into UV/TiO2 system was studied and the effect in such addition is very encouraging for all the selected additives. Oxyhalogens are capable of deferring the electron-hole recombination of TiO2 which significantly improved its catalytic performance. The presence of IO3(-) in UV/TiO2 resulted in the fastest o-ClA decay among three oxhalogens at the same dosage. The decay of o-ClA in UV/TiO2/oxyhalogen process is characterized by a two-stage pseudo-kinetics, where a faster initial decay was followed by a retardation state. A mathematics model was successfully established for the prediction of the two-stage decay of o-ClA in UV/TiO2/IO3(-) with any designed [IO3(-)] concentration.     

Biocompatible Polyurethane Scaffolds Prepared from Glycerol Monostearate-Derived Polyester Polyol

Biodegradable polyester polyol was synthesized from oleochemical glycerol monostearate (GMS) and glutaric acid under a non-catalyzed and solvent-free polycondensation method. The chemical structure of GMS-derived polyester polyol (GPP) was elucidated by FTIR, ¹H and ¹³C NMR, and molecular weight of GPP was characterized by GPC. The synthesized GPP with acid value of 3.03 mg KOH/g sample, hydroxyl value of 115.72 mg KOH/g sample and M_n of 1345 g/mol was incorporated with polyethylene glycol (PEG) and polycaprolactone diol (PCL diol) to produce a water-blown porous polyurethane system via one-shot foaming method. The polyurethanes were optimized by evaluating glycerol as a crosslinker, silicone surfactant and water blowing agent on tensile properties of polyurethanes. All polyurethanes underwent structural change, and crystalline hard segments of polyurethanes were shifted to higher temperature suggested that hard segments undergone re-ordering process during enzymatic treatment. In terms of biocompatibility, polyurethane scaffold produced by reacting 100% w/w of GPP with isophorone diisocyanate and additives showed the highest cells viability of 3T3 mouse fibroblast (94%, day 1), and MG63 human osteosarcoma (107%, day 1) and better cell adhesion as compared to reference polyurethane produced by only PEG and PCL diol (3T3 cell viability: 8%; MG63 cell viability: 2%). The current work demonstrated GPP synthesized from renewable and environmental friendly resources produced polyurethanes that allows improvement in physico-chemical, mechanical and biocompatibility properties. By blending with increasing content of GPP, the water-blown porous polyurethane scaffold has shown great potential as biomaterial for soft and hard tissue engineering.     

Comparison of the expectations of residents and rescue providers of community emergency medical response after mudslide disasters

The integration of community resources is critical for emergency response. A thorough understanding of a community's requirements in advance is essential. This study examines communities that suffered mudslide disasters, and discusses expectations of the emergency medical response provided to the community from the perspectives of residents and rescue groups. The questionnaire used in the study was designed to adopt the Likert Scale for quantification purposes. Its content was divided into six categories based on emergency response. Both residents and rescue providers acknowledged that finance and reimbursement were the highest priority. Public information was regarded as the least important by both groups. Significant differences existed between the groups on patient care activities and supportive activities (P = 0.02 and 0.03, respectively), which were more appreciated by residents. We conclude that residents had higher expectations of evacuation, temporary relocation, lodging, food, and sanitary management than the rescue groups.     

Economic and Political Factors that Lead to the Budget Deficit in Hong Kong from 1998 to 2003

Abstract

Despite the adverse impact of the budget deficit in Hong Kong has been alleviated since the economic recovery from 2003, the fiscal deficit may return when there is another downturn in the economy if the problem is not handled fundamentally. Based on the economic and political situation from 1998 to 2003, the factors that lead to the budget deficit in Hong Kong are analyzed in four perspectives, including (a) increase in public expenditure; (b) decrease in public revenues; (c) poor management of public money and (d) weak administration. With a better understanding on these factors, possible solutions to the fiscal problem faced by the government may be developed.     

An efficient synthesis of bisenols in water extract of waste onion peel ash

Environmental Chemistry Letters - Bisenols and its derivatives are attractive heterocyclic compounds exhibiting a wide range of biological properties, including anticancer, antipyretic and...