添加炭基材料对蔬菜废物好氧堆肥进程和腐熟度的影响

以蔬菜废弃物辣椒秸秆和树叶为堆肥原料(CK),采用密闭式好氧堆肥工艺,研究了添加5%木本泥炭(T1)、5%活性炭(T2)和10%木本泥炭(T3)等炭基材料对堆肥pH、EC、CO2累积量、物料损失率、T值、C/N和发芽率指数的影响。结果显示,T2处理的pH在60 d后维持在8~9之间;EC值随着堆肥进行呈现先下降后升高再下降的趋势,最终CK、T1、T2和T3处理的EC值(mS/cm)分别降低了1.02、0.76、0.33和0.48;T2和T3处理的CO2累积量一直高于其他处理;所有处理的物料损失率均在20%以上;4个处理堆肥产品的T值分别为0.56、0.65、0.68和0.69;堆肥产品的发芽率指数分别为63.2%、69.3%、93.5%和86.1%。T值和发芽率指数显示T2和T3处理达到了腐熟阶段。结果表明,在蔬菜堆肥处理中添加炭基材料可改善堆肥产品的理化性质,加速堆肥物料的分解,有效地缩短堆肥周期和提高堆肥产品的腐熟度。     

壳聚糖改性红壤去除铜绿微囊藻

研究了聚合氯化铝铁和壳聚糖改性对高岭土、海泡石和红壤去除水中铜绿微囊藻效果的影响。结果表明,壳聚糖改性的红壤对铜绿微囊藻的去除效果最好,其生成絮体密实度大,抗扰动能力强。当改性红壤的投加量为50 mg/L时,叶绿素a和铜绿微囊藻去除率分别达到98.0%、95.1%。该絮凝剂适应性好,在pH为3.0~6.0的范围内对铜绿微囊藻均可取得很好的去除效果,对叶绿素a和浊度的去除率可达90%以上。壳聚糖通过包裹红壤颗粒,借助壳聚糖的粘结架桥和电中和能力,大幅度提高了红壤的絮凝性能。该絮凝剂处理富藻水,具有絮凝效果明显、絮体密实度大、投加量少、绿色环保、经济等优点,在工程上具有较大的实用价值。     

Foresight science in conservation: Tools,barriers, and mainstreaming opportunities

Foresight science is a systematic approach to generate future predictions for planning and management by drawing upon analytical and predictive tools to understand the past and present, while providing insights about the future. To illustrate the application of foresight science in conservation, we present three case studies: identification of emerging risks to conservation, conservation of at-risk species, and aid in the development of management strategies for multiple stressors. We highlight barriers to mainstreaming foresight science in conservation including knowledge accessibility/organization, communication across diverse stakeholders/decision makers, and organizational capacity. Finally, we investigate opportunities for mainstreaming foresight science including continued advocacy to showcase its application, incorporating emerging technologies (i.e., artificial intelligence) to increase capacity/decrease costs, and increasing education/training in foresight science via specialized courses and curricula for trainees and practicing professionals. We argue that failure to mainstream foresight science will hinder the ability to achieve future conservation objectives in the Anthropocene.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-022-01786-0.     

Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties

The waterborne polyurethane (PU) prepolymer was prepared based on isophorone diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and hydroxyethyl methyl acrylate (HEMA). The modified waterborne polyurethane–acrylate (PUA) emulsions were obtained with different proportions of acrylate (butyl acrylate and methyl methacrylate) and initiating agent by in situ dispersion technique. The structures and thermal properties of prepared PU and PUA were analyzed and characterized with FT-IR, UV–Vis spectroscopy and DSC. The PUA hybrid samples had lower glass transition temperature of hard segment and higher decomposition temperatures than PU sample. Performances of the emulsion and film were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The results indicated that the particle sizes of the PUA dispersions were larger than those of the pure PU and the solvent resistance, mechanical properties of PUA films was improved compare with the unmodified polyurethane film. The film had the biggest hardness and the least water absorption when the BA/MMA mass ratio 5:5 modified PU. The obtained PUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.     

Material and energy recovery from Automotive Shredded Residues (ASR) via sequential gasification and combustion

Shredding is the common end-of-life treatment in Europe for dismantled car wrecks. It produces the so-called Automotive Shredded Residue (ASR), usually disposed of in landfill. This paper summarizes the outcome of a study carried out by Politecnico di Milano and LEAP with the support of Actelios SpA on the prospects of a technology based on sequential gasification and combustion of this specific waste stream. Its application to the treatment of ASR allows the recovery of large fractions of metals as non-oxidized, easily marketable secondary raw materials, the vitrification of most of the ash content and the production of power via a steam cycle. Results show that despite the unfavourable characteristics of ASR, the proposed technology can reach appealing energy performances. Three of four environmental impact indicators and the cumulative energy demand index are favourable, the main positive contributes being electricity production and metal recovery (mainly aluminium and copper). The only unfavourable indicator is the global warming index because, since most of the carbon in ASR comes from fossil sources, the carbon dioxide emissions at the stack of the thermal treatment plant are mainly non-renewable and, at the same time, the avoided biogas production from the alternative disposal route of landfilling is minor.     

Heirs and spares: caste conflict and excess queen production in Melipona bees

The caste conflict hypothesis states that there is potential conflict over the caste fate of totipotent immature females in social insects. In most species, an immature female has little control over her fate because workers control her nutrition. However, in Melipona bees, immature females should have considerable control over their own caste fate because they develop on a provision mass in a sealed cell, and because queens are not larger than workers. This may explain why, in Melipona, large numbers of queens are reared only to be executed. (Because Melipona colonies are founded by swarms very few reproductive opportunities for adult queens occur.) This study uses a one-locus genetic model to determine the optimum proportion of females that should develop into queens from the perspective of immature totipotent females who control their own caste fate. For a population in which all colonies are headed by a single, single-mated queen, which is the typical situation in Melipona, the optimum rises from 14-20% as male production by workers declines from 100% to zero. This agrees well with previous studies which, collectively, give an average of 22% of females developing into queens.     

The Chartherm process,what’s in the name?

Earlier research has identified the Chartherm process (Thermya, France) as a candidate for the best available technology to treat chromated copper arsenate (CCA) impregnated wood waste. This paper presents the working principle, the characteristics and the current state-of-knowledge related to the process, illustrating clearly the differences with pyrolysis and carbonisation processes. To emphasise the specific nature of the process, it has been given its own name ‘chartherisation’. The avoidance of tar and dioxin release, the role of the solid matrix in the metal behaviour and the separation process are described. Furthermore, the possible benefits of working at elevated pressure are discussed, based on the experience with charcoal production from coal and biomass. This paper shows that more fundamental research is needed to understand and model all mechanisms contributing to the characteristic nature of chartherisation, in order to control the dynamic behaviour and tune the operating conditions in the reactor on the quality of the products requested.     

Prediction of household and commercial BMW generation according to socio-economic and other factors for the Dublin region

Both planning and design of integrated municipal solid waste management systems require accurate prediction of waste generation. This research predicted the quantity and distribution of biodegradable municipal waste (BMW) generation within a diverse ‘landscape’ of residential areas, as well as from a variety of commercial establishments (restaurants, hotels, hospitals, etc.) in the Dublin (Ireland) region. Socio-economic variables, housing types, and the sizes and main activities of commercial establishments were hypothesized as the key determinants contributing to the spatial variability of BMW generation. A geographical information system (GIS) ‘model’ of BMW generation was created using ArcMap, a component of ArcGIS 9. Statistical data including socio-economic status and household size were mapped on an electoral district basis. Historical research and data from scientific literature were used to assign BMW generation rates to residential and commercial establishments. These predictions were combined to give overall BMW estimates for the region, which can aid waste planning and policy decisions. This technique will also aid the design of future waste management strategies, leading to policy and practice alterations as a function of demographic changes and development. The household prediction technique gave a more accurate overall estimate of household waste generation than did the social class technique. Both techniques produced estimates that differed from the reported local authority data; however, given that local authority reported figures for the region are below the national average, with some of the waste generated from apartment complexes being reported as commercial waste, predictions arising from this research are believed to be closer to actual waste generation than a comparison to reported data would suggest. By changing the input data, this estimation tool can be adapted for use in other locations. Although focusing on waste in the Dublin region, this method of waste prediction can have significant potential benefits if a universal method can be found to apply it effectively.