黄河下游泥沙灾害与减灾对策(Ⅰ)——泥沙灾害分类与侵蚀型泥沙灾害

从泥沙研究的角度概述了与河流泥沙有关的灾害及其分类，将黄河下游的泥沙灾害分成侵蚀型泥沙灾害与堆积型泥沙灾害两种情况，讨论了侵蚀型泥沙灾害，包括滩岸坍塌、河道整治工程出险，初步提出了侵蚀型泥沙灾害的减灾方略。     

Land reclamation and strip-mined coal production in appalachia

This study quantifies the short-run impacts of reclamation on strip mining costs, coal prices, production, and employment in Appalachia. A process analysis model is developed and used to estimate short-run strip-mined coal supply functions under conditions of alternative reclamation requirements. Then, an econometric model is developed and used to estimate coal demand relations. Our results show that full reclamation has rather minor impacts. In 1972, full reclamation would have increased strip-mined coal production costs an average of $0.35 per ton, reduced strip-mined coal production by 10 million tons, and cost approximately 1600 jobs in Appalachia.     

Concentrations of inorganic elements in 20 municipal waters in Sweden before and after treatment – links to human health

The water chemistry of 20 municipal water treatment plants in southern Sweden, representing various bedrock situations, and water qualities, were investigated. Four water samples, raw and treated, were collected from each plant and analyzed by predominantly ICP-OES and ICP-MS at four occasions from June to December, 2001. The concentrations of Ca, Mg, K, Na, HCO₃ and a number of micronutrients, varied considerably in treated waters from the studied plants (ranges; Ca: 9.1–53.7 mg L⁻¹, Mg: 1.4–10.9 mg L⁻¹, K: 1.1–4.8 mg L⁻¹, Na; 5.4–75.6 mg L⁻¹, HCO₃: 27–217 mg L⁻¹). The elimination of Fe and Mn from raw water was efficient in all treatments investigated, giving concentrations in treated waters below the detection limits at some plants. Softening filters gave waters with Ca-concentrations comparable to the softest waters in this study. Adjustment of pH by use of chemicals like lye, soda or lime, modified the consumer water composition significantly, besides raising the pH. It was estimated that drinking water contributed to approximately 2.2–13% of the daily Ca uptake, if the gastrointestinal uptake efficiency from food and water was estimated to be around 50%. The corresponding figures for Mg was 1.0–7% and for F 0–59%. None of the studied elements showed any significant time trends in raw or treated waters during the follow-up period. The concentrations of potentially toxic metals such as Al, Pb and U were low and did not indicate risks for adverse health effects (ranges; Al: 0.5–2.3 μg L⁻¹, Pb: 0–0.3 μg L⁻¹, U: 0.2.5 μg L⁻¹).     

Estimating wild boar density in hunting areas by a probabilistic sampling of drive counts

Environmental and Ecological Statistics - The evaluation of wild boar density in a hunting district can be performed by accurate drive counts of boars within the drive areas assigned to each...     

MEETING THE CHALLENGE OF POLICY-RELEVANT SCIENCE: LESSONS FROM A WATER RESOURCE PROJECT1

ABSTRACT: Water resource scientists face complex tasks in evaluating aspects of water projects, but relatively few assessment procedures have been applied and accepted as standard applications. Decision-makers often rely on environmental assessments to evaluate the value and operation of projects. There is often confusion about scientists' role in policy decisions. The scientist can affect policy-making as an expert withess, an advocate or a surrogate. By understanding the policy process, scientists can make their work more “policy relevant.” Using the Terror Lake hydro project in Alaska as a guide, three lessons are discussed: (1) not all problems are able to be solved with technology; (2) policy-relevant technology is rarely imposed on a problem; and (3) the scientist need not just react to the policy process, but can have an impact on how that process unfolds.     

Environmental behaviour of a construction made of a mixture of hydraulic binders and air pollution control residues from municipal solid waste incineration Part 1. Physico-chemical characterisation and modelling of the source term

The reuse of waste materials requires the development of assessment methods for the long-term release of pollutants (source term) from wastes (or materials containing wastes) in contact with water. These methods depend on the scenario conditions: characteristics of the materials (especially physical structure and composition), contact with water. The scenario studied here is a water storage reservoir for fire fighting. The reservoir construction is made of a mixture of hydraulic binders and air pollution control (APC) residues from a municipal solid waste incinerator (MSWI). The modelling of the source term is performed in 5 steps ranging from the physico-chemical characterisation of the material to the validation of the proposed model by means of field simulation devices. This article presents the first steps of the methodology: physico-chemical characterisation of the source term, identification of the main transfer mechanisms and laboratory scale modelling of the source term. During the physico-chemical characterisation, it has been shown that the solidified waste shows a high basic capacity and that a relative decrease in pH during leaching favours retention of the main pollutants. During the first leaching sequences, the dynamic leaching tests show that the release of pollutants such as cadmium, arsenic, zinc and lead is extremely low but that the release of alkaline species (sodium and potassium) and chloride is very high from the beginning, whereas the release of calcium remains very high even after 3600 h of leaching. Identification of the main transfer mechanisms concludes that the release of soluble pollutants is the combined result of diffusional transfer of pollutants in the solution and the physico-chemical specificity of the species. The modelling based on these features enables a good simulation of the release but reveals a deviation from the experimental results after 500 h for alkaline species and 1000 h for Ca and Cl leaching. However, this deviation only appears after release of the major part of these elements.     

Radiogenic Lead Isotopes and Time Stratigraphy in the Hudson River, New York

Radionuclide, radiogenic lead isotope and trace metal analyses on fine-grained sediment cores collected along 160 km of the upper and tidal Hudson River were used to examine temporal trends of contaminant loadings and to develop radiogenic lead isotopes both as a stratigraphic tool and as tracers for resolving decadal particle transport fluxes. Very large inputs of Cd, Sb, Pb, and Cr are evident in the sediment record, potentially from a single manufacturing facility. The total range in radiogenic lead isotope ratios observed in well-dated cores collected about 24 km downstream of the plant is large (e.g., maximum difference in ²⁰⁶Pb/²⁰⁷Pb is 10%), characterized by four major shifts occurring in the 1950s, 1960s, 1970s and 1980s. The upper Hudson signals in Cd and radiogenic lead isotopes were still evident in sediments collected 160 km downstream in the tidal Hudson. The large magnitude and abrupt shifts in radiogenic lead isotope ratios as a function of depth provide sensitive temporal constraints that complement information derived from radionuclide analyses to significantly improve the precision of dating assignments. Application of a simple dilution model to data from paired cores suggests much larger sediment inputs in one section of the river than previously reported, suggesting particle influxes to the Hudson have been underestimated.     

Exposure of workers in mineral processing industries in Brazil

The mining, milling and processing of uranium and thorium bearing minerals may result in radiation doses to workers. A preliminary survey pilot program, that included six mines in Brazil (two coal mines, one niobium mine, one nickel mine, one gold mine and one phosphate mine), was launched in order to determine the need to control the radioactive exposure of the mine-workers. Our survey consisted of the collection and analysis of urine samples, complemented by feces and air samples. The concentrations of uranium, thorium and polonium were measured in these samples and compared to background data from family members of the workers living in the same dwelling and from residents from the general population of Rio de Janeiro. The results from the coal mines indicated that the inhalation of radon progeny may be a source of occupational exposure. The workers from the nickel, gold and phosphate mines that were visited do not require a program to control internal radiological doses. The niobium mine results showed that in some areas of the industry exposure to thorium and uranium might occur.     

Comparison of spontaneous antibiotic resistance frequency of Salmonella Typhimurium growth in glucose amended continuous culture at slow and fast dilution rates

The objective of the study was to determine the frequency of spontaneous acquisition of resistance to select antibiotics by Salmonella Typhimurium (ST) when grown in glucose amended continuous flow culture at slow (D = 0.025 h(-1)) or fast (D = 0.27 h(-1)) dilution rates. The bacterium was grown in LB minimal medium (pH 6.25) containing no antibiotics. Upon achieving steady state, samples were plated to tryptic soy agar (TSA) alone or supplemented (per ml) with 2 and 16 microg oxytetracycline, 4 and 16 microg tetracycline, 2 and 64 microg kanamycin, and 0.25 and 2 microg enrofloxacin. Regardless of growth rate, CFU of resistant ST from the TSA containing antibiotics was less than 2 x 10(1) except for 2 microg kanamycin and 0.25 microg enrofloxacin treatments (higher than 1 x 10(9) and 4 x 10(7) CFU of resistant ST for trials 1 and 2, respectively). Frequency of recovering resistant ST from the TSA containing the higher antibiotic concentrations was less than 1 in 10(9) for all antibiotics, but was higher on the media containing 2 microg kanamycin and 0.25 microg enrofloxacin at both slow and fast growth rates. In general, minimal susceptibility differences were detected for isolates from slow and fast dilution rates.     

Sorption of pentachlorophenol on pine bark

The minimization of pentachlorophenol (PCP) transport in the environment driven by industrial wastewater discharges can be accomplished by sorption in natural, available and low cost by-products like pine bark. Taking into account that PCP is a chemical which behaviour is highly dominated by the surrounding features, this work intended to evaluate the sorption kinetics and equilibrium parameters according to the pH and temperature as well as the pine bark particle size. The PCP uptake by pine bark showed to be faster in the initial phase followed by a slower process, being 24 h the suitably time to reach the sorption equilibrium in the range of pH studied. The neutral PCP species showed to have higher binding capacity to pine bark than the anionic PCP, which was reflected in a decrease in the distribution coefficient (Kd) of the linear sorption isotherm with the increase of solution pH from 2 to 7. On the other hand, between 10 degrees C and 35 degrees C, the temperature does not seem to play a significant role in the PCP sorption by pine bark, while the sorbent size is a key parameter to enhance the overall process.