Laboratory scale studies on removal of chromium from industrial wastes

Chromium being one of the major toxic pollutants is discharged from electroplating and chrome tanning processes and is also found in the effluents of dyes,paint pigments,manufacturing units etc.Chromium exists in aqueous systems in both trivalent(Cr^3 )and hexavalent (Cr^6 )forms.The hexavalent form is carcinogenic and toxic to aquatic life,whereas Cr^3 is however comparatively less toxic.This study was undertaken to investigate the total chromium removal from industial effluents by chemical means in order to achieve the Pakistan NEQS level of 1 mg/L by the methods of reduction and precipitation.The study was conducted in four phase Ⅰ,the optimum pH and cost effective reducing agent among the four popular commercial chemicals was selected.As a result,pH of 2 was found to be most suitable and sodium meta bisulfate was found to be the most cost effective reducing agent respectively.Phase Ⅱ showed that lower dose of sodium meta hisulfate was sufficient to obtain 100% efficiency in reducing Cr^6 to Cr^3 ,and it was noted that reaction time had no significance in the whole process.A design curve for reduction process was established which can act as a tool for treatment of industrial effluents.Phase Ⅲ studies indicated the best pH was 8.5 for precipitation of Cr^3 to chromium hydroxide by using lime.An efficiency of 100% was achievable and a settling time of 30 minutes produced clear effluent.Finally in Phase Ⅳ actual waste samples from chrome tanning and electroplating industries,when precipitated at pH of 12 gave 100% efficiency at a settling time of 30 minutes and confirmed that chemical means of reduction and precipitation is a feasible and viable solution for treating chromium wastes from industries.     

白洋淀地区的多氯联苯污染研究

对白洋淀地区不同类型纸厂排水口底泥及保定市排污渠底泥进行了ＧＣ／ＥＣＤ分析，可萃取有机氯（ＥＯＣｌ）含量测定，检出了多氯联苯和有机氯农药。用截止分子量为１０００道尔顿的透析袋方法对相应地区的水体进行了检测，发现水体中可检出含氯农药六六六，但多氯联苯等由于水中存在浓度低未能检出，同样样品的ＧＣ／ＭＳ／ＣＯＭ结果表明，水体中主要存在的亲脂性有机污染物为：蒽酮、蒽二酮、苯胺、氯代烃、邻苯二甲酸酯类和苯系物。     

Enhancement of anaerobic biodegradability of flower stem wastes with vegetable wastes by co-hydrolysis

The vegetable wastes and flower stems were co-digested to evaluate the anaerobic hydrolysis performance of difficultly biodegradable organic wastes by introducing readily biodegradable organic wastes. The experiments were carried out in batches. When the vegetable wastes were mixed with the flower stems at the dry weight ratio of 1 to 13, the overall hydrolysis rate increased by 8%, 12%, and 2% according to the carbon, nitrogen, and total solid （TS） conversion rate, respectively. While the dry weight ratio was designed as 1 to 3, there was a respective rise of 5%, 15%, and 4% in the conversion rate of carbon, nitrogen, and TS. The enhancement of anaerobic hydrolysis from the mixed vegetable wastes and flower stems can be attributed to the formation of volatile fatty acids （VFA） and nutrient supplement like nitrogen content. The maximum VFA concentration can achieve 1.7 g/L owing to the rapid acidification of vegetable wastes, loosing the structure of lignocellulose materials. The statistic bivariate analysis revealed that the hydrolysis performance was significantly related to the physical and biochemical compositions of the feeding substrate. Especially, the soluble carbon concentration in the liquid was significantly positively correlated to the concentration of nitrogen and hemicellulose, and negatively correlated to the concentration of carbon and lignocellulose in the feeding substrate, suggesting that the regulation and control of feedstock can have an important influence on the anaerobic hydrolysis of organic wastes.     

全球沙尘气溶胶源汇分布及其变化特征的模拟分析

根据全球沙尘气溶胶气候模式GEM-AQ/EC模拟的1995~2004年的沙尘起沙量和干湿沉降量,分析了沙尘气溶胶源汇的全球时空变化特征.全球沙尘起沙量集中在各个主要沙漠地区,北非对全球沙尘气溶胶贡献最大为66.6%.沙尘气溶胶沉降的高值区分布在沙漠源区及其紧临的下风地区.最大净沙尘气溶胶接收主要分布在沙漠周围地区并形成净接收量大于10t/(km2×a)的位于0°N~60°N之间的北非、欧亚大陆、西太平洋、北印度洋、北美和大西洋的带状分布.在北非、阿拉伯半岛、中亚、东亚和澳大利亚5个主要沙漠地区中,起沙量和沉降量都存在明显的季节变化,除中亚其他4个区域干湿沉降量和起沙的季节变化基本一致;东亚地区沙尘气溶胶起沙量和总沉降量的季节变化最为明显,而北非沙漠起沙量和总沉降量的季节变化最小,其他3个区域的季节变化幅度基本相同.中亚起沙峰值和阿拉伯半岛起沙次峰值出现在夏季,其他区域的峰值均出现在春季.10年间全球陆地年平均起沙量为(1500±94)Mt,保持略微上升趋势.以北非沙漠起沙量年际变化率最低(6.3%), 而以东亚(28.3%)和澳大利亚(45.0%)起沙量年际变化最为明显;全球陆地的沙尘气溶胶沉降量以约9.9Mt/a的速率递减,全球海洋的沙尘气溶胶沉降递增.     

Carbonization of waste PVC to develop porous carbon material without further activation

Efficient removal of chlorine from PVC achieved by two-stage heat-treatment (280 and 410 degrees C) provided chlorine-free isotropic pitch containing additive. The pitch was stabilized and carbonized into porous carbons with surface areas of approximately 300 m2/g. Resultant porous carbons showed three pore structures of supermicropore, micropore and mesopore. The generation of CO2 from the decomposition of the CaCO3 additive in waste PVC is responsible for the development of porous structures. The surface area of the carbonized product increased after the removal of CaO.     

Integrated Risk Framework for Onsite Wastewater Treatment Systems

Onsite wastewater treatment systems (OWTS) are becoming increasingly important for the treatment and dispersal of effluent in new urbanised developments that are not serviced by centralised wastewater collection and treatment systems. However, the current standards and guidelines adopted by many local authorities for assessing suitable site and soil conditions for OWTS are increasingly coming under scrutiny due to the public health and environmental impacts caused by poorly performing systems, in particular septic tank-soil adsorption systems. In order to achieve sustainable onsite wastewater treatment with minimal impacts on the environment and public health, more appropriate means of assessment are required. This paper highlights an integrated risk based approach for assessing the inherent hazards associated with OWTS in order to manage and mitigate the environmental and public health risks inherent with onsite wastewater treatment. In developing a sound and cohesive integrated risk framework for OWTS, several key issues must be recognised. These include the inclusion of relevant stakeholders throughout framework development, the integration of scientific knowledge, data and analysis with risk assessment and management ideals, and identification of the appropriate performance goals for successful management and mitigation of associated risks. These issues were addressed in the development of the risk framework to provide a generic approach to assessing risk from OWTS. The utilisation of the developed risk framework for achieving more appropriate assessment and management techniques for OWTS is presented in a case study for the Gold Coast region, Queensland State, Australia.     

Measurement and Management of Human-Induced Patterns of Forest Fragmentation: A Case Study

In many tropical developing countries, the twin pressures of population and poverty are resulting in substantial fragmentation of forests, increasing the probability of extinction for many species, Forest fragmentation occurs when large contiguous forests are perforated by small holes or broken up into edges and smaller patches to form a nonforested matrix of open spaces. Thus, forest fragmentation refers not only to the area of forest cleared, but also to the pattern of this clearance, the resulting forest’s spatial properties. Both characteristics are important for species survivability. Apart from opening up forests to many abiotic and biotic influences, fragmentation can affect species dispersal and migration through its effects on forest connectivity. Landscape ecology conceptualizes connectivity as a gradient of critical thresholds, ranging from the large intact forest to the small unconnected forest patch. This article reports results from a multiple-scale analysis of forest fragmentation in Jamaica’s Cockpit Country, an area of once contiguous forest now under threat from human encroachment. Spatial forest data derived from classification of ETM+ satellite imagery are used to measure fragmentation patterns representing various degrees of forest connectivity and density. The results suggest that, overall, 81% of the region is in forest. However, fragmentation patterns also suggest that this forest is riven with extensive perforations indicative of an early stage in the decline of contiguity. The results provided by the spatial fragmentation model are a first step in the design of effective conservation and rehabilitation plans for the area. The article concludes with a discussion of possible multiscale management options for the region.     

Influence of soil properties and aging on the toxicity of copper on compost worm and barley

Influence of soil properties and aging on Cu partitioning and toxicity was assessed on 10 artificial soils constituted using a statistical design considering pH (5.5 and 7.5), organic matter (1-30% [w/w]), and clay content (5-35% [w/w]). Total Cu as well as water-, CaCl2-, and diethylene triamine pentaacetic acid (DTPA)-extracted Cu fractions were determined for each soil mixture. Ecotoxic effect was assessed by determining growth inhibition of barley (Hordeum vulgare L.) and compost worm (Eisenia fetida) mortality. Analyses were repeated after a 16-wk aging period of the soils at pH 7.5 (8 x 2-wk wetting and drying cycle). Results indicated that pH was the main factor controlling Cu partitioning, ahead of organic matter and clay content. Calcium chloride (0.5 M)-extracted Cu fractions showed the best correlation with toxic responses (r = 0.55-0.66; p < 0.05), while total and DTPA-extracted Cu concentrations could not explain differences in toxicity. Direct regressions between toxicity and soil properties (pH, organic matter, and clay content) provided better explanation of variance: r2= 0.50 (p = 0.00006) for compost worm mortality, r2= 0.77 (p < 0.00001) for barley shoot inhibition, and r2= 0.92 (p < 0.00001) for barley root inhibition. Copper toxicity was mainly influenced by pH and, to a lesser extent, by organic matter and clay content. Aging in organic soils revealed a slight reduction in ecotoxicity while an increase was observed in soils with low organic matter content. Further investigation using longer aging periods would be necessary to assess the significance of this observation.     

Comparative environmental analysis of waste brominated plastic thermal treatments

The aim of this research activity is to investigate the environmental impact of different thermal treatments of waste electric and electronic equipment (WEEE), applying a life cycle assessment methodology. Two scenarios were assessed, which both allow the recovery of bromine: (A) the co-combustion of WEEE and green waste in a municipal solid waste combustion plant, and (B) the staged-gasification of WEEE and combustion of produced syngas in gas turbines. Mass and energy balances on the two scenarios were set and the analysis of the life cycle inventory and the life cycle impact assessment were conducted. Two impact assessment methods (Ecoindicator 99 and Impact 2002+) were slightly modified and then used with both scenarios. The results showed that scenario B (staged-gasification) had a potentially smaller environmental impact than scenario A (co-combustion). In particular, the thermal treatment of staged-gasification was more energy efficient than co-combustion, and therefore scenario B performed better than scenario A, mainly in the impact categories of "fossil fuels" and "climate change". Moreover, the results showed that scenario B allows a higher recovery of bromine than scenario A; however, Br recovery leads to environmental benefits for both the scenarios. Finally the study demonstrates that WEEE thermal treatment for energy and matter recovery is an eco-efficient way to dispose of this kind of waste.     

Electrostatic separators of particles: Application to plastic/metal, metal/metal and plastic/plastic mixtures

Electrostatic separation is a generic term given to a significant class of technologies of industrial waste processing, widely used for the sorting of granular mixtures due to electric forces acting on particles whose average size is approximately 5mm. The focus of this paper is on three electrostatic processes of separation used for processing of different types of mixtures: (i) role-type electrostatic separator, used to sort mixtures containing metal/plastic particles (copper/PVC for example); (ii) plate-type electrostatic separator, used to sort mixtures containing metal/metal particles (copper/lead for example) and (iii) free-fall electrostatic separator, used to sort mixtures of plastic/plastic particles (PVC/PE for example). Experiments carried out on industrial samples using laboratory electrostatic separators confirm the efficiency of these processes and show that the processes can improve the recovery and purity of products resulting from industrial wastes.