Carbon nanotubes-incorporated MIL-88B-Fe as highly efficient Fenton-like catalyst for degradation of organic pollutants

CNTs were incorporated into MIL-88B-Fe to get a new Fenton-like catalyst (C@M). Fe(II) was introduced in C@M to get a fast initiation of Fenton-like reaction. Fe(II) content in C@M was related with oxygen-containing functional groups on CNTs. C@M shows efficient catalytic degradation of pollutants over a wide pH range. Iron-based metal organic frameworks have been verified to be efficient heterogeneous Fenton catalysts due to their open pore channels and highly uniform distribution of metallic centers. In these catalysts, however, the iron element is mainly in the form of Fe(III), which results in a process required to reduce Fe(III) to Fe(II) to initiate Fenton reaction. To address this problem, carbon nanotubes (CNTs) with electron-rich oxygen-functional groups on the surface were incorporated into the metal organic frameworks (MIL-88B-Fe) to improve Fe(II) content for an enhanced Fenton-like performance. The prepared CNT@MIL-88B-Fe (C@M) showed much stronger catalytic ability toward H₂O₂ than MIL-88B-Fe. The pseudo-first-order kinetic constant for phenol degradation by C@M (0.32 min^–1) was about 7 times that of MIL-88B-Fe, and even higher than or comparable to the values of reported heterogeneous Fenton-like catalysts. Moreover, the Fenton-like system could effectively degrade various kinds of refractory organic pollutants and exhibited excellent catalytic activity over a wide pH range (4–9). XPS analysis confirmed that Fe(II) content of the catalyst gradually increased with CNT loadings. Electron spin resonance analysis showed that the signal intensity (•OH) of C@M was much higher than MIL-88B-Fe, which was consistent with the degradation efficiency of pollutants. Furthermore, the Fe(II) content of the catalyst gradually increased along with the oxygen-functional group content of CNTs. The result demonstrated that oxygen-containing functional groups of CNTs have a significant impact on the enhanced catalytic performance of C@M. This study provides a new insight to enhance Fenton reaction by using nanocarbon materials.     

Changes in the heavy metals and petroleum hydrocarbon contents in seawater and surface sediment in the year following artificial reef construction in the Pearl River Estuary,China

Environmental Science and Pollution Research - Marine pollution is an important driver of ocean biodiversity loss, which can be mitigated by the construction of artificial reefs (ARs). Many studies...     

乌鲁木齐市大气中SO2的灰色预测

根据灰色系统理论,联系乌鲁木齐市大气环境的实际状况,建立了精度检验为一级的灰色预测模型,并对大气中的SO2值进行了预测分析,结果表明,该预测模型具有较高的准确性、合理性和可信度.     

哌嗪氨基二硫代甲酸型螯合树脂的合成及其吸附性能

用哌嗪和二硫化碳反应合成氨基二硫代甲酸中间体，再与二卤代烃反应得到1，4-双(二硫代酯基)哌嗪聚合物，考察了中间体和螯合树脂对Ag^ ，Cu^2 ，Zn^2 ，Ni^2 ，CO^2 ，Pb^2 ，Pd^2 ，Cr^3 的静态吸附性能，结果表明，两者均可以吸附金属离子，缩聚后的螯合树脂具有更强的吸附能力。     

王哥庄湾陆源硝酸盐氮输送通量研究

以汇水区域相对独立的崂山王哥庄地区为例 ,通过研究该区的水文地质条件、分析地表水和地下水中的硝酸盐氮 (NO3 N) ,采用流量法和断面法分别对河流和地下水向王哥庄湾的NO3 N输送量进行了计算。结果表明 ,1999年 5月下旬地下水向海洋输送的NO3 N占整个陆源输入量的 30 .0 6 % ,说明地下水向海洋的营养盐输送量是海洋环境评估的重要边界条件。     

影响郑州市大气TSP浓度诸因素的灰色关联分析与弹性分析

根据郑州市大气TSP浓度的监测数据以及相关影响因素数据，运用灰色系统理论的关联分析方法，得出了影响TSP浓度的主要因素，并通过建立灰色GM（1，N）模型，运用弹性分析理论分析了各影因素对TSP浓度的贡献大小。经过两者分析，提出了控制和治理TSP污染的对策。     

重庆某发电厂灰渣中微量元素分布特征研究

本文以某电厂的锅炉灰渣(飞灰和底灰)为研究对象，分析了24个飞灰和24个底灰样品中Hg，As，Se，Pb，Cd，Zn，Ba，Co，Cr，Cu，Li,Ni，V,Zr等微量元素的含量水平和分布规律，结果表明：飞灰中As、Pb、Zn、Ba、Cu、V、Zr和Li的含量大于10ppm，Hg和Cd含量在1ppm以下；与原煤相比，14种元素在飞灰中的含量更高。其中Hg、As、Cu、Ni、Cr、Co、Cd、Zn和V等元素的含量分别是原煤的2倍以上；除As和Se外，其余元素在底灰中的含量高于原煤。     

水中氰化物突发性污染事故应急监测方法研究

旨在研究现场快速测定水中的氰化物。运用比色分析的朗伯 比尔定律和真空工艺设计 ,将复杂繁琐的实验室测试方法和操作程序有机地融合在测试管中。该测试管具有快速、简便和价格低廉等特点 ,测定范围为 0 0 0 5— 0 2 0mg/L。     

水中钙离子现场快速测定方法研究

通过研制一种测试管 ,从而能简便、快速的测定水中的钙离子。该测试管尤其适宜于现场即时监测 ,具有快速、简便、抗干扰能力强和价格低廉等特点