Life cycle analysis and choice of natural gas-based automotive alternative fuels in Chongqing Municipality,China

Road transport produces significant amounts of emissions by using crude oil as the primary energy source. A reduction of emissions can be achieved by implementing alternative fuel chains. The objective of this study is to carry out an economic, environmental and energy (EEE) life cycle study on natural gas-based automotive fuels with conventional gasoline in an abundant region of China. A set of indices of four fuels/vehicle systems on the basis of life cycle are assessed in terms of impact of EEE, in which natural gas produces compressed natural gas (CNG), methanol, dimethylether (DME) and Fischer Tropsch diesel (FTD). The study included fuel production, vehicle production, vehicle operation, infrastructure and vehicle end of life as a system for each fuel/vehicle system. A generic gasoline fueled car is used as a baseline. Data have been reviewed and modified based on the best knowledge available to Chongqing local sources. Results indicated that when we could not change electric and hydrogen fuel cell vehicles into commercial vehicles on a large scale, direct use of CNG in a dedicated or bi-fuel vehicle is an economical choice for the region which is most energy efficient and more environmental friendly. The study can be used to support decisions on how natural gas resources can best be utilized as a fuel/energy resource for automobiles, and what issues need to be resolved in Chongqing. The models and approaches for this study can be applied to other regions of China as long as all the assumptions are well defined and modified to find a substitute automotive energy source and establish an energy policy in a specific region.     

南水北调中线不同调水方案下的汉江水华发生概率分析

为评估南水北调中线工程对汉江中下游水华的影响，从汉江水华的成因机理分析入手，提出了汉江水华发生概率的计算模型．该模型由河流一维水动力学模型、水体富营养化模型以及随机数生成模型组成，它不仅可以模拟汉江水华的发生机理，而且可以对诱发水华的各种因子进行随机抽样组合，从而求出中线调水不同方案实施后汉江水华的发生概率．计算结果表明，在现状情况下汉江水华的发生概率为9．2％，南水北调中线各调水方案（无引江济汉工程）实施后，汉江水华发生的概率将有一定程度的增加，而如果调水方案与引江济汉工程同时兴建将大大减少汉江水华发生的概率．最后提出建议，汉江自身的水污染治理是减少水华发生概率的最根本措施，而丹江口水库和引江济汉工程的联合调度将会减小汉江水华发生的概率．     

开式冷挤压成形深小锥孔件时极限变形程度的理论研究

给出了深小锥孔件开式冷挤压成形时极限变形程度的定义,建立了变形区非稳态连续速度场;利用上限原理得到了极限变形程度的理论判据。分析了各主要参数对极限变形程度的影响规律,对指导制定深小锥孔件开式冷挤压成形工艺具有重要意义。     

湿冶厂氨氮废水液膜分离放大工艺与设备

简要介绍在实验室获得满意效果基础上的液膜法处理某湿冶厂含氨氮废水的放大工艺与设备,处理时为４ｔ／ｄ,当废水中氨氮浓度为８００－１２００ｍｇ／Ｌ,经二级处理可下降到排放标准,无二级污染。采用在ＲＤＣ基础上发展起来的一种改型锥孔转盘塔,特别适用于所使用表面活性剂乳液体系,能显著提高传质效率,减少返混,降低传质单元高度。     

Turnover mechanisms of organic conformation on turbidity in drinking water

The turbidity variation in artificial water and samples from a water plant was investigated in the presence of organics with different relative molecular mass. The results show that recessive turbidity existed when water chemical conditions were changing. The formation of turbidity depended on organic relative molecular mass and their conformations on particles. At higher pH and lower ionic strength, the organic chains with a more extended conformation resulted in rising turbidity of the suspension. At lower pH, the reconformation of organics took place due to charge neutralization by the proton, resulting in a decline in turbidity. The addition of NaCl and MgCl₂ at pH 7.00 also resulted in a decrease of turbidity in the suspension. It is believed that the occurrence of recessive turbidity has a significant influence on the stability of water supply quality.     

金属板料成形摩擦机理研究

对不锈钢板料和碳钢在金属塑性成形时 (高接触压力 )的摩擦机理进行了实验研究 ,分析了压力对滑动阻力和摩擦系数的影响 ,得出了随压力增大摩擦系数逐渐变小的结论 ,从而为应用有限元法进行板料成形过程中塑性变形的计算机模拟提供真实的边界条件打下了基础。     

大窑湾疏浚水环境要素变化特征及其相关关系

根据大窑湾后６个泊位疏浚工程本底调查和疏浚监测结果，借助因子分析探讨了疏浚前后水环境要素的变化特征及相关关系，找出了控制污染物分布的主要因子，评价了疏浚对海洋环境的影响。     

污水处理的节能实践

采用变频技术时污水处理设备进行节能改造，使其根据污水水量、水质的变化而自动调速。将污泥机械脱水滤液与剩余污泥混合，以此来改善污泥的浓缩脱水性能。工程运行实例表明：设备的变频调速和滤液的再利用能够降低污水处理的能量消耗，提高工艺运行水平。     

等离子体技术在固体废弃物处理中的应用

简要介绍了等离子体的相关概念及其处理污染物的工作原理，阐述了等离子体技术在固体废弃物治理方面的应用研究概况，并对等离子体在固体废弃物治理中的应用作了市场前景分析，说明了该技术在固体废弃物治理中具有一定的应用前景。     

钢厂热锯机噪声控制方案

某钢厂热锯机的工作噪声问题严重影响附近居民的日常生活，急需解决。根据其发声机理，通过采取对圆盘锯边缘开槽，安装吸隔声罩，对锯片增加阻尼材料，夹紧工件等措施取得了较好的降噪效果。