Pseudomonas sp.fz胞外分离物降解四溴双酚A

四溴双酚A(TBBPA)是全球消耗量最大的溴系阻燃剂。通过活性物质的定位、分离和TBBPA产物的分析等步骤,对Pseudomonas sp.fz胞外分离物降解TBBPA进行了研究。结果表明,存在于胞外的活性物质通过异丙基断裂和脱溴两条途径降解TBBPA。通过超滤,Sephadex G-10分离纯化得到了具有降解活性的小分子物质,分子量约为376~456 Da,初步鉴定为短肽类物质。这种小分子物质具有很好的热稳定性(30~80℃),在弱酸性条件下(2.0~5.0)活性较高,其活性还受金属离子、氧气和抑制剂(Na N3)的影响。此外,部分纯化的小分子物质在一定条件下能够产生羟基自由基(·OH)。     

吴哥窟——人间最美的建筑

以雕刻和建筑艺术闻名于世的吴哥文化,是柬埔寨文化乃至世界历史发展上的一个高峰,因此,探访吴哥窟成为当今许多国内外旅游文化人士的梦想,笔者不久前有幸来到柬埔寨,来到吴哥。与中国的万里长城、埃及的金字塔和印度尼西亚的婆罗浮屠并称为东方世界四大奇迹之一的吴哥古迹,位于柬埔寨暹粒省金边湖北面,它包括吴哥主城和吴哥窟古刹,大小奇特的建筑物共有600多座,分布在45平方公里的丛林中,或许没有人想到,这么精致、辉煌的建筑群落,这个世界古代文明璀璨的瑰宝,曾经湮没在荒革中达400年之久。     

煤化工不同浓度含盐废水相对蒸发率的试验研究

煤化工含盐废水的自然蒸发工艺是浓缩高盐废水无害化处理的重要方法之一。与淡水的蒸发不同,含盐废水的蒸发不仅受气温、湿度、风速等外部因素的影响,也受到废水溶解物质及其离子、分子间相互作用等内部因素的影响,但逐个考察影响含盐废水蒸发速率的各个因素与蒸发速率的关系比较困难。通过煤化工不同浓度含盐废水的蒸发试验,找出了含盐废水相对蒸发速率与TDS、密度及盐度之间的关系,对煤化工行业蒸发池的运行管理具有一定的参考价值。     

煤矿带式输送机事故分析及防护措施

带式输送机是煤矿生产中的一种主要运输设备,广泛应用在采区平巷、采区上下山、运输大巷及井口运输走廊等场所,是矿井煤炭运输系统的中枢,一旦发生故障,轻则耽误生产,重则造成人员伤亡。笔者以常见的煤矿带式输送机故障类型为例,分析其产生故障的根本原因,提出各种故障的预防措施;论述了煤矿带式输送机综合保护装置的基本功能和动作原理;通过带式输送机综合保护装置控制系统结构示意图,全面、客观地展示了煤矿用带式输送机容易发生各种故障的方位和自动保护装置测控元件的布局、电气控制原理,不仅可以适时监控带式输送机的工作状态,自动报警、显示、处理各种运行故障,还可以避免人为误操作带来的各种损失。     

在役化工装置安全评价模式的研究

根据在役装置安全评价的两类目的,分析现有在役化工装置安全评价模式中存在的不足;提出在役化工装置安全评价的一个新思路和新模式;给出了基于新模式的安全评价程序,并对该评价程序各个步骤及采用的评价方法组合进行了较为详细的讨论,其关键是建立评价指标体系。该评价模式既能查找出装置中存在的具体安全隐患,也能给出装置总的安全评价结论。同时指出,安全评价指标体系的建立和完善应成为安全管理的一项标准化、基础性工作。该评价模式的思路不仅适用于在役化工装置的安全评价,也适用于其他系统安全现状评价,是对进一步完善当前安全现状评价工作的一个有益尝试。     

特种胶塑复合管抗张强度计算

通过对特种胶塑复合管的抗张强度计算和生产实践，证明了矿用充填管路采用胶塑复合管是可行的。为矿用充填管以胶塑复合管替代铁管提供了依据。     

基于风险管理方法的危险源评价分级研究

以化工企业内涉及危险物质的装置、设施而构成的危险源为研究对象,在简要分析重大危险源评价分级的作用与方法的基础上,针对中小型化工企业,提出基于风险管理方法的危险源评价分级概念。通过计算危险源引发事故的概率和事故后果来确定危险源的风险值,并将其分为4个等级,指导企业制定合适的安全管理制度、使用恰当的安全技术措施,以最小化的代价确保危险源安全运行,从而提高中小型化工企业的危险源管理水平。     

开采引起的覆岩冒落及地表沉陷的机理与防护

本文根据覆岩的实际受力情况，对开采引起的覆岩冒落和地表沉陷机理进行了研究。即首先是岩层离层与弯曲，接着岩体移动，从而导至上覆岩层冒落，出现地表沉陷，并给出了相应的预防和维护措施。     

Nationwide monitoring of polychlorinated biphenyls and organochlorine pesticides in sediments from coastal environment of Korea

To assess the organochlorine contamination in the Korean marine environment, a nationwide monitoring study was conducted. A total of 138 surface sediments, covering the whole Korean coast, were collected and analyzed. Organochlorine compounds (OCs) were widely distributed in the Korean coastal environment, with PCB and DDT contamination being particularly prevalent. The overall concentrations of PCBs, DDTs, HCHs, CHLs, and HCB in surface sediments were in the range of 0.088-199ngg(-1) (median value: 1.56ngg(-1)), 0.006-135ngg(-1) (0.68ngg(-1)), not detected (ND)-5.46ngg(-1) (0.32ngg(-1)), ND-3.26ngg(-1) (0.14ngg(-1)), and ND-2.59ngg(-1) (0.05ngg(-1)), respectively. The southeastern coast was found to be highly contaminated. Overall contamination status of Korean coastal sediments with regard to OCs is lower than that of USA. With the exception of highly industrialized sites, Korean coastal areas in general showed similar OC concentrations to those of other Asian countries. There was a significant correlation between distributions of most organochlorine contaminants with each other. OC contamination is closely related to shipping and industrial activities. Of the 7 sites categorized as highly polluted, 4 are in a harbor zone. Adverse effects to benthic communities are expected at the levels of OC contamination observed from harbor and industrial areas.     

Single particle mass spectrometry of oxalic acid in ambient aerosols in Shanghai: Mixing state and formation mechanism

Oxalic acid in individual aerosol particles was measured using single particle aerosol time-of-flight mass spectrometry (ATOFMS) in the summer of 2007 in Shanghai, China. Oxalate was found in 3.4% of total particles with diameters in the range of 0.2 – 2.0 μm. Size, chemical composition and hourly temporal counts of single particles that contained oxalic acid were measured. The predominant types of oxalate-containing particles were characterized to distinguish the primary and secondary sources of oxalic acid. Biomass burning was revealed as a major primary source of oxalic acid which contributed more than 20% of the oxalate-containing particles. Evidences for two different formation pathways of oxalic acid were observed in our experiment. The number fraction of oxalate-containing particles correlated with that of sulfate particles and the changes of air parcel backward trajectories, suggesting that in-cloud processing played important roles in oxalic acid formation. The diurnal patterns of dust and sea salt particle counts fitted well with the ambient relative humidity variation, suggesting that heterogeneous reactions occurring in hydrated/deliquesced aerosols also contributed to the production of oxalic acid.