张家沟危岩裂缝变化规律及温度干扰排除研究

采用裂缝计对忠武管道张家沟段危岩裂缝进行了近3 a的相对位移监测,变形曲线经历了收缩-扩张的"类正弦"变化过程。由相关性分析可知,裂缝相对位移实测值与同期温度呈明显负相关性,因此可以推断温度是引起实测曲线呈年周期性变化的主要原因,且裂缝相对位移变化滞后温度变化3~12 h。根据这一特点,采用线性回归分析方法消除了由温度引起的岩体线弹性假象位移,反映了危岩裂缝变形的真实状态。     

渐变型多孔介质中低浓度瓦斯燃烧特性数值模拟

利用模拟软件Fluent6.3建立二维模型并进行合理设置,对多孔介质中的煤矿低浓度瓦斯燃烧进行数值模拟,研究了均匀型和渐变型燃烧器中的温度分布和NOx生成情况,以及三种不同渐变型多孔介质组合燃烧器中的温度分布和NOx生成情况。结果表明,渐变型多孔介质燃烧器的温度分布比均匀型燃烧器更加均匀;同一瓦斯当量比和流速下,渐变型多孔介质燃烧器的NOx产生量比均匀型燃烧器低很多,有利于减少污染物排放;三种不同渐变型多孔介质组合的温度分布和NOx生成有着不同特点,燃烧器设计时,可根据不同需求选取不同组合形式,综合考虑各因素,组合一燃烧特性最佳。     

房间开门形式和走廊转角条件对人员疏散规律影响的实验研究与数值模拟分析

为了研究房间开门形式和走廊转角条件对人员疏散规律的影响,通过一系列实验并采用计算机数值模拟相结合,对比分析了不同开门形式和走廊转角条件下的人员疏散规律。结果表明:房间开门总宽度一定且出口出现拥堵条件下,只设置一道门,疏散效率最高。当房间需要满足设置两道门时,门应尽量设置在房间的两对边墙上,这样疏散效率较高。两道门设置在房间相邻边墙上时最不利于人员疏散。走廊转角角度从0°增加到90°,疏散时间先增长然后缩短最后又增长。同条件下,圆角疏散能力优于折角。圆角半径大小对人员疏散没有显著影响。研究结果为建筑房间开门形式和走廊设计提供了参考依据。     

紫外吸收剂在湖泊中的分布及其对底栖动物的毒性效应

紫外吸收剂大量用于工业材料和个人护理品中,近年来在水体中不断被检出,同时由于其高度亲脂性,易在底泥和水生生物体内富集,产生潜在的毒性效应,已成为一类新型污染物。本文综述了紫外吸收剂在湖泊环境中的分布和生物富集效应,重点分析了二苯甲酮类等典型紫外吸收剂对底栖动物的药物代谢系统、抗氧化系统及其生长发育的影响及其毒性作用机制,并对未来该领域的研究进行了展望。     

Quantitative health risk assessment of inhalation exposure to automobile foundry dust

With a growing awareness of environmental protection, the dust pollution caused by automobile foundry work has become a serious and urgent problem. This study aimed to explore contamination levels and health effects of automobile foundry dust. A total of 276 dust samples from six types of work in an automobile foundry factory were collected and analysed using the filter membrane method. Probabilistic risk assessment model was developed for evaluating the health risk of foundry dust on workers. The health risk and its influencing factors among workers were then assessed by applying the Monte Carlo method to identify the most significant parameters. Health damage assessment was conducted to translate health risk into disability-adjusted life year (DALY). The results revealed that the mean concentration of dust on six types of work ranged from 1.67 to 5.40 mg/m³. The highest health risks to be come from melting, cast shakeout and finishing, followed by pouring, sand preparation, moulding and core-making. The probability of the risk exceeding 10⁻⁶ was approximately 85%, 90%, 90%, 75%, 70% and 45%, respectively. The sensitivity analysis indicated that average time, exposure duration, inhalation rate and dust concentration (C) made great contribution to dust health risk. Workers exposed to cast shakeout and finishing had the largest DALY of 48.64a. These results can further help managers to fully understand the dust risks on various types of work in the automobile foundry factories and provide scientific basis for the management and decision-making related to health damage assessment.

     

Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent electrodeposition

Resin adsorption and subsequent electrodeposition were used for nickel recovery. Treated wastewater can meet the Electroplating Pollutant Discharge Standard. The spent resin is completely regenerated by 3 BV of 4% HCl solution. 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.     

基于"成本-能力-能效"的长江经济带城市韧性评估

通过构建城市韧性"成本-能力-能效"的评估模型,综合运用熵值法、主成分分析法、SBM模型、探索性空间数据分析和K-means聚类方法,对长江经济带126个城市的韧性进行综合定量评估,归纳总结城市韧性模式和聚类特征,并运用GWR模型分析影响韧性能力的成本因素,探究韧性效率的驱动机制.研究表明:(1)分维度来看,核心城市呈现韧性成本和韧性能力的"双高",韧性效率则由非核心城市引领.从均衡的角度来看,韧性成本、韧性能效具有明显的水平层级性,而韧性能力在城市间的分野相对不大.(2)综合来看,韧性成本和韧性能力随城市规模的扩张而逐渐增加,而韧性效率逐渐衰减;韧性模式具有明显的上中下游区际差异性:上游地区表现为"低耗低能高效",中游地区"低耗低能中效",下游地区为"高耗高能低效";韧性的空间联系兼有核心城市垂直极化和一般城市扁平抱团.(3)从机制看,全社会用电量、建成区面积和科技支出是影响城市韧性能力的主要成本因素,不同韧性模式的城市具有差异化的主控因素.研究对于完善城市韧性评价体系、丰富城市韧性评估视角和推动城市韧性建设具有重要的现实意义.     

有机肥处理对旱地红壤细菌群落及玉米生产力的影响

为探明旱地红壤细菌群落特征及玉米生产力对不同有机肥处理的响应，基于自2002年设置在中国科学院鹰潭红壤生态实验站的有机培肥长期定位试验，采用Illumina高通量测序，研究不同有机肥（不施肥，M0；低量有机肥，M1；高量有机肥，M2；高量有机肥加石灰，M3）处理下土壤细菌群落多样性和结构以及玉米生产力的变化.结果发现，与M0相比，土壤pH、有机质（SOM）、全氮（TN）、全磷（TP）含量和玉米生产力在不同有机肥（M1、M2和M3）处理下均显著增加，其中M3处理的提升效果最佳.施用有机肥显著提高了土壤细菌群落的Shannon、Evenness、Chao1与ACE指数，重塑了细菌群落结构.基于随机森林模型分析，土壤性质中的pH和TP显著影响土壤细菌多样性，而pH、SOM、TP和TN对土壤细菌群落结构影响显著.相关性分析和结构方程模型分析表明，土壤TP和SOM可以通过改变土壤细菌多样性和群落组成间接影响玉米生产力.研究结果从指导我国南方红壤区农田合理施肥的角度，为农田土壤质量提高及耕地产能提升提供科学依据.     

蔬菜施不同肥料对产量和土壤肥力的贡献

为控制施肥对蔬菜和土壤的负面影响，充分利用施肥对土壤肥力的保护功能，探讨蔬菜合理的有机肥施用量，在不同质地土壤上，田间试验小白菜、苦瓜、豇豆三种蔬菜施不同量有机肥，收获时测定其产量、品质及试验前后的土壤有机质质量分数。结果表明，(1)在施适量无机NPK的条件下，每造蔬菜的有机肥(禽畜粪便，下同)施用量，砂土上小白菜为4500kg／hm^2、苦瓜和豇豆为3000kg/hm^2；在壤土上，小白菜和苦瓜均宜施3000kg/hm^2，豇豆则宜施4500kg／hm^2；在粘土上，小白菜每造只宜施1500～3000kg／hm^2的有机肥。(2)有机肥必须与无机肥合理配合施用，才能获得最佳的产量和品质效果。(3)施有机肥3000-4500kg/hm^2 适量无机肥可使土壤有机质水平保持在种植蔬菜前的质量分数水平，该施肥量和方式不仅可使蔬菜高产、优质，还有利于保护土壤肥力。(4)对蔬菜产量的贡献，有机肥和化肥配合施用的处理对蔬菜产量的贡献最大，来自土壤的效应由小到大依次为有机肥和化肥配合施用→化肥→有机肥，进一步反映合理施肥有利于保护土壤肥力。     

成都平原蔬菜生产中灌溉水对农药渗漏的影响研究

针对成都平原蔬菜生产中大量施用农药、大量灌水的特点,首次在国内应用欧洲官方成熟的农药评估模型——PEARL模型,研究评估了成都平原当前蔬菜生产中的灌溉方式对两种不同特性农药的渗漏的影响。杀毒矾(土壤吸附力(KOM)为0 L/kg,半衰期(DT50)为80 d)在没有灌溉条件下,其渗出土体时的最大质量浓度是190μg.L-1,而有灌溉条件下其渗出质量浓度则可达523μg.L-1,是没有灌溉条件下的2.75倍。三唑磷(KOM为200 L.kg-1,DT50为60 d)在没有灌溉条件下,其渗出土体时的最大质量浓度是0.025μg.L-1,而有灌溉条件下其渗出质量浓度为0.13μg.L-1,比没有灌溉时提高了4.2倍。不管有没有灌溉三唑磷在该地区对地下水的污染风险都很小,而杀毒矾的风险则很高。因此,农药的化学特性是影响农药渗漏的最重要的因子。在蔬菜生产中应尽量选用被土壤吸附力强、半衰期短的农药,例如:三唑磷;农药在土壤中的移动载体是土壤水,不合理的灌溉会大大地加大农药淋溶,应当多使用微喷、滴灌等节水灌溉措施,减少使用漫灌等耗水多的原始灌溉方式。