Feasibility study of a passive aeration reactor equipped with vertical pipes for compost stabilization of cow manure.

Pilot-scale composting was carried out with cow manure to evaluate the performances of two passive aeration systems: a conventional passive aeration system equipped with horizontal pipes and an unusual passive aeration method based on air delivery by means of vertical pipes. The effects of both types of passive aeration apparatus were investigated in order to determine the degree of composting rate by continuously monitoring temperature, moisture content, organic matter, electrical conductivity, pH and C/N ratio in the piles. Temperatures in the range of thermophily (55-65 degrees C) were reached in all runs within 1-2 days then lasting for about 1 week, a span long enough for pathogen abatement. Results suggest that passive aeration carried out by vertical pipes is more effective for air delivery into compost piles than conventional passive aeration of air adduction with horizontal pipes. The variation in the number of vertical pipes was revealed to be an important parameter for the control of composting rate and temperature. Composting rates estimated from the heat balance equation were substantially in agreement with those computed through the conversion ratio of total organic matter decrement. The conversion ratios and composting rates obtained in this study using passive aeration with vertical pipes were well aligned with those found using forced air delivery systems.     

Attitudes towards sex selection for non-medical reasons: a review

Early non-invasive fetal sexing is widely available over the Internet, leading to concerns about its possible use for sex selection. The aim of this review is to summarise the results of surveys describing lay attitudes towards sex selection for non-medical reasons to help address or inform such concerns. A search of electronic databases and key journals was supplemented by an Internet search and citation-tracking. Twenty-one quantitative studies were identified. Most were conducted in the US, with five recent studies in the UK and Germany. Most studies found that, overall, people were not in favour of sex selection. However, this varied from 94 to 18%. People may hold more negative attitudes when the method of sex selection is specified, particularly if this involves termination of pregnancy (TOP). Attitudes towards the general availability of sex selection are less negative than those towards personal use. Attitudes were consistently negative in German surveys. Little is known of such attitudes outside the US, the UK and Germany, and how such attitudes may change as new sex selection technologies become available. Studies of use of early non-invasive fetal sexing for sex selection for non-medical reasons are needed to assess the extent to which concerns about usage are justified and to assist in debates on how these might be most appropriately addressed. Copyright © 2006 John Wiley & Sons, Ltd.     

构筑防灾科技学院学生文化体系

文章从四个方面阐释学生文化体系的构成，即重在打基础，鼓励学生个性化发展；培植防灾学院自己的学生文化“精英”；创新与创业是学生文化的闪光点；培育一个好的学生文化的管理环境。做到此四点，就可办一个好的、有特点的、合格的高等学校。本文有的放矢，用事实来说话。     

Effects of calcium hydroxide and calcium chloride addition to bentonite in iron ore pelletization.

Pyrite ash is created as waste from the roasting of pyrite ores during the production of sulphuric acid. These processes generate great amounts of pyrite ash waste that is generally land filled. This creates serious environmental pollution due to the release of acids and toxic substances. Pyrite ash waste can be utilized in the iron production industry as a blast furnace feed to process this waste and prevent environmental pollution. The essential parameters affecting the pelletization process of pyrite ash were studied using bentonite as a binder. Experiments were then carried out using bentonite and a mixture of bentonite with calcium hydroxide and calcium chloride in order to make the bentonite more effective. The metallurgical properties of pyrite ash, bentonite, calcium hydroxide, calcium chloride, a mixture of these and sintered pellets were studied using X-ray analysis. The crushing strength tests were carried out to investigate the strength of pyrite ash waste pellets. The results of these analyses showed that pyrite ash can be agglomerated to pellets and used in the iron production industry as a blast furnace feed. The crushing strength of the pellets containing calcium hydroxide and calcium chloride in addition to bentonite was better than the strength of pellets prepared using only bentonite binder.     

Prenatal diagnosis and molecular cytogenetic characterisation of a small de novo interstitial duplication 16q11.2-q13

We describe the first prenatally detected case of a small de novo interstitial duplication of chromosome 16q. This chromosomal aberration is extremely rare. Amniocentesis was indicated by advanced maternal age only. Ultrasound examinations of the foetus showed no abnormalities. Conventional and molecular cytogenetic analyses on cultured amniocytes by comparative genomic hybridisation (CGH) and fluorescence in situ hybridisation (FISH) using partial chromosome paints and a locus-specific YAC clone revealed a de novo direct duplication of the chromosomal region 16q11.2-q13 leading to a partial trisomy 16q (46,XX,dup(16)(q11.2q13)). There are only five postnatal reports of comparable duplications involving this chromosomal region. These patients presented with little or no associated dysmorphic features but with significant neurodevelopmental delay and severe behavioural problems. After genetic counselling, the parents opted for termination of pregnancy. Post-mortem examination showed slight facial dysmorphic signs, minor dysgenesis of the ovaries and an atypical outflow of the arteria thyroidea ima. Copyright © 2006 John Wiley & Sons, Ltd.     

On-line speciation of arsenical compounds in fish and mussel extracts by HPLC-ICP-MS

The separation and determination of sub-μmol/l levels of six environmentally significant As compounds was accomplished by means of high performance liquid chromatography (HPLC) combined online with inductively coupled plasma mass spectrometry (ICP-MS). The species of interest (arsenite and arsenate, monomethylarsonic acid, dimethylarsinic acid, arsenobetaine and arsenocholine) were quantified in fish and mussel extracts after separation on a Dionex AS7 column equipped with an on-guard AG7 column using a bicarbonate buffer as the mobile phase in a gradient mode. The species thus eluted were directly forwarded to the ICP-MS detector. The detection power of the overall system allows each As form to be determined at concentrations as low a 0.0013–0.0027 μmol 1⁻¹.     

Tolerance of calluna vulgaris and peatland plant communities to sulphuric acid deposition

Critical loads offer a unique way of evaluating impacts of acid deposition by quantifying environmental sensitivity. The critical loads of acidity for UK peat soils have been based upon an arbitrary reduction in pH of 0.2 units. This chemical shift needs to be better related to adverse effects on sensitive biological receptors. It is known that effective precipitation pH equates closely to soil solution pH, and the latter is directly linkable to biotic effects of pH change. On continuation of a long-term experiment assessing impacts of simulated acid rain on peat microcosms in a realistic outdoor environment, Calluna vulgaris continued to flourish at acid deposition loads well above the existing critical load. Calluna plants were harvested and analysed, and acid deposition treatments to the microcosms continued to allow natural vegetation to regenerate. A diverse mixture of moorland plants and bryophytes established at acidity treatments well above the existing critical load, and only a very high acid load resulted in no natural regeneration. A critical effective rain pH value of 3.6 is suggested as a basis for setting critical loads. At this pH, Calluna grows well, and a healthy diverse vegetation community re-establishes when harvested. It is suggested that the peat critical load should be set at the acid load that, at any specific site, would result in a mean effective precipitation pH of 3.6.