温室条件下UV-B辐射对蓝藻结皮生长和超微结构的影响

UV-B辐射是野外蓝藻结皮经常面临的一种环境胁迫因子.报道了温室条件下UV-B辐射对蓝藻结皮形态、生理和超微结构特征的影响.在本研究中,首先通过接种具鞘微鞘藻和爪哇伪枝藻形成初始蓝藻结皮,接着以初始蓝藻结皮为材料进行3种辐射处理:光合有效辐射、UV-B辐射+光合有效辐射和N-乙酰半胱氨酸+UV-B辐射+光合有效辐射.在...     

连续流膜生物反应器中好氧颗粒污泥的形成及机制探讨

为了探讨好氧颗粒污泥在连续流膜生物反应器(MBR)中的形成过程和机制,采用连续流试验的方法,研究了好氧颗粒污泥形成过程中膜反应器内污染物的去除效果和好氧颗粒污泥特性的变化,并对连续流MBR中好氧颗粒污泥的形成机制进行了探讨.结果显示,连续流MBR中好氧颗粒污泥的形成增强了MBR的运行稳定性和抗冲击能力.废水中微生物抑制...     

基于实测的燃煤电厂细颗粒物排放特性分析与研究

选取我国6个有代表性的燃煤电厂对烟尘、PM10和PM2.5的排放情况进行实测,根据所测数据计算各电厂对烟尘、PM10和PM2.5除尘效率以及排放因子,并分析得到其排放特性.6个受检燃煤电厂静电除尘及湿法脱硫设备对烟尘总除尘效率最高为99.88%,最低为99.75%,平均去除率为99.82%;除尘前,烟气中PM10含量范...     

重点产业源增长对北部湾地区气态污染物模拟的影响

根据污染源普查资料制作北部湾地区2007年人为排放源清单,以及中期/远期参比情景(REF15/REF20)和远期调控情景(SCEi20)下的排放源清单.采用WRF-Chem模拟北部湾地区空气质量现状及未来变化.2007年SO2和NO2月平均质量浓度模拟值与监测值比较吻合.广东、广西(海南)地区污染物质量浓度较高(低)....     

基于格网的太湖生态环境质量空间评价

将GIS格网空间分析技术应用于太湖生态环境综合评价,实现了全湖范围内多因素的综合评价,揭示太湖生态环境状况的空间分布规律。首先将太湖分为800个格网单元,在2002~2003年实测样点的水体、底泥、水生生物特征数据基础上,通过空间插值获得全部单元模拟值,然后进行格网叠加计算,通过层次分析法得出各单元综合评价值,将太湖分为好、较好、中等、较差、差5个等级区,生成太湖生态环境空间综合评价图。结果显示,评价结果与太湖实际情况基本相符,太湖生态环境质量基本上由东南向西北逐渐降低,中等以下地区占全部湖区的一半以上,整体状况偏差。     

基于模态分析的某振动试验方法改进

目的对该试验夹具进行改进设计,使试验夹具首阶模态频率大于60 Hz。方法基于模态分析方法,分别采取改进夹具结构形式和改变夹具边界条件两种改进方式进行优化设计。结果根据模态分析结果发现,夹具结构形式改进对模态频率提高的效果不明显,改变边界条件能够显著提高夹具频率。改进后试验夹具首阶模态频率为69.5 Hz,大于试验输入载荷频率范围。结论试验夹具的固有频率应避开振动试验输入载荷频率范围,避免对试验结果造成影响。     

应用景观生态学原理构建城市河道生态护岸

首先分析了传统水工设计中护岸的弊端,然后从景观生态学角度介绍了岸坡生态系统的主要特征、生态护岸的多种功能和景观生态学内涵;介绍了国内外生态护岸的研究现状,提出了城市河道在生态护岸设计中应在保证稳定安全的前提下,坚持生态优先的原则,重视其景观性和亲水性;最后对生态护岸的材料与植物群落的选择进行了分析。旨在探讨河流生态治理的方法,为生态护岸的构建与河流、洪泛区的治理提供一定的思路和参考。     

中国旅游业空间集聚与集群化发展研究

旅游产业集聚与集群是联系密切而又有明显区别的一组概念,旅游产业集聚是集群形成的前提,但旅游产业集聚不一定形成集群,影响旅游产业空间集聚和集群发展的因素较多。选择行业集中度、基尼系数、赫芬代尔系数等指标,以相关数据为依据,探讨了中国旅游业的空间集聚问题,指出中国旅游业具有明显的空间集中分布与分散相结合的集聚特征。分析了中国旅游业集群发展现状与存在的问题并提出了相应对策,认为我国旅游业集群化发展是非常必要而且有可能的。     

Effect of platinum on the photocatalytic degradation of chlorinated organic compound

TiO2 nanoparticles, doped with di erent Pt contents, were prepared by a modified photodeposition method using Degussa P-25 TiO2, H2PtCl6 6H2O and methanol as the solvents. The physicochemical properties of Pt/TiO2 were investigated by the nitrogen adsorption and desorption isotherm measurement technique, X-ray di raction analysis and photoluminescence spectra, respectively. Reaction rates from photocatalytic removal of dichloromethane over Degussa P-25 TiO2 and Pt/TiO2 were evaluated. The average diameter and BET surface area of the TiO2 catalyst particles were 300 nm and 50 m2/g, respectively. The degradation e ciency was 99.0%, 82.7%, 55.2%, and 57.9% with TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. And the degradation e ciency was 99.3%, 79.7%, 76.5%, and 73.4% with a 0.005 wt.% Pt/TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. In addition, we found that the photoluminescence emission peak intensities decreased with increases in the doping amount of Pt, which indicates that the irradiative recombination was weakened. Furthermore, the results showed that the UV/0.005 wt.% Pt/TiO2 process was capable of e ciently decomposing gaseous DCM in air.     

Removal of copper ions from aqueous solution by calcium alginate immobilized kaolin

Kaolin has been widely used as an adsorbent to remove heavy metal ions from aqueous solutions. However, the lower heavy metal adsorption capacity of kaolin limits its practical application. A novel environmental friendly material, calcium alginate immobilized kaolin (kaolin/CA), was prepared using a sol-gel method. The e ects of contact time, pH, adsorbent dose, and temperature on Cu2+ adsorption by kaolin/CA were investigated. The Langmuir isotherm was used to describe the experimental adsorption, the maximum Cu2+ adsorption capacity of the kaolin/CA reached up to 53.63 mg/g. The thermodynamic studies showed that the adsorption reaction was a spontaneous and endothermic process.