黄浦江流域典型污水中不同粒径胶体的三维荧光光谱特征

基于切向流超滤系统及三维荧光光谱技术,对黄浦江流域典型污水(即生活污水及农业污水)中的胶体进行粒径分级及三维荧光光谱特性分析.结果表明,所选水样的胶体质量浓度及胶体态有机碳质量浓度分别为9.60~32.50 mg·L~(-1)和0.03~6.25 mg·L~(-1),二者均随粒径的增加而呈递增趋势.不同粒径分级胶体的三维荧光图谱表现为类蛋白荧光峰(峰D和峰T)及类腐殖质荧光峰(峰C和峰A)这4个荧光峰,其中类蛋白荧光峰主要存在于M_r1×10~3~5×10~3分级胶体中,类腐殖质荧光峰主要存在于M_r10×10~3~300×10~3分级胶体中.同时,通过表征胶体荧光光谱特性的荧光指数,包括FI值、腐殖化指数HIX及生源指数BIX,分析了所选胶体的来源及光谱特性.结果表明,小粒径胶体主要为陆源来源,芳香性及腐殖化程度较高;而大粒径胶体自生源比重大,类蛋白物质是其主要成分.     

太湖表层水体及沉积物中双酚A类似物的分布特征及潜在风险

本研究对太湖表层水和沉积物中7种双酚A类似物(BPs)的浓度水平及分布特征进行了调查,并对其潜在的风险进行了评估.结果表明太湖表层水中双酚F(BPF)、双酚S(BPS)和双酚A(BPA)为主要的BPs组分;沉积物中BPA对BPs总浓度的贡献率最高,其次为BPF和BPS,且与沉积物中TOC含量具有显著的正相关;BPA、BPF和BPS在表层水和沉积物中的高浓度水平均分布在太湖入湖支流(采样点S4~S10).风险评估表明BPs的联合毒性风险熵表现出低生态风险,且对人体不具有明显的健康风险.     

西安市重污染与清洁天PM2.5组分及其活性氧物质对比

针对重霾污染,在西安市冬季重污染日(2015-11-30~2015-12-09)和清洁日(2016-01-13~2016-01-22)各进行了为期10d的PM_(2.5)采集,测量其中的有机碳、元素碳,及NH_4~+、NO_3~-、SO_4~(2-)等无机水溶性离子,探讨两种污染条件下的组分特征及其成因.结果表明:观测期,重霾日和清洁日PM_(2.5)质量浓度分别为(170±47.5)μg·m~(-3)和(48.6±17.9)μg·m~(-3),且重霾日伴随低能见度、高湿静风等多种不利气象条件;重霾日二次无机离子(NH_4~+、NO_3~-、SO_4~(2-))组分占PM_(2.5)质量浓度的49.8%±13.1%,而清洁日为19.4%±5.95%,并且重霾日硫氧化速率(sulfur oxidation ratio,SOR)和氮氧化速率(nitrogen oxidation ratio,NOR)分别为0.282±0.157和0.269±0.124,远高于清洁日(SOR和NOR分别为0.189±0.057和0.077±0.046),重霾日二次有机组分浓度[(6.22±3.87)μg·m~(-3)]是清洁日[(1.44±1.63)μg·m~(-3)]的5倍,表明二次污染及不利气象条件是造成重霾期间相关组分浓度升高的重要原因.最后,通过二氯荧光黄双乙酸盐(2',7'-DCFH)化学荧光分析法测定了其中活性氧物质(reactive oxygen species,ROS)的浓度,探讨其对于二次无机组分形成的影响,结果表明观测期ROS平均浓度(以H_2O_2计)分别为(4.99±1.54)nmol·m~(-3)(重霾期),(0.492±0.356)nmol·m~(-3)(清洁期),二次反应及积累效应可能是西安重霾条件下ROS浓度升高的主要原因.NO_3~-、SO_4~(2-)与ROS均呈现正相关(P0.05),表明ROS可能通过二次氧化过程参与到二次无机组分形成过程中.     

黄山PM10中二元羧酸类化合物的季节变化特征及其来源

为研究黄山大气PM_(10)中二元羧酸类化合物的季节变化特征,分别于2015年夏季、冬季在黄山山顶采集PM_(10)样品,并分析二元羧酸、酮羧酸和α-二羰基化合物.结果表明,无论在夏季还是冬季,草酸(HOOC—COOH,C_2)均是浓度最高的二元羧酸,其次是丙二酸(HOOC—CH_2—COOH,C_3)、丁二酸[HOOC—(CH_2)_2—COOH,C_4],这与其它高海拔地区的分子组成是相似的.大部分二元羧酸的浓度呈冬低夏高的季节变化特征,但是冬季己二酸(C_6)和邻苯二甲酸(Ph)的浓度约高于夏季的2倍,表明冬季黄山大气受周边地区所排放的人为污染物的影响更大.作为二元羧酸的重要前体物,乙二醛(Gly)与甲基乙二醛(mGly)的浓度呈冬高夏低的季节变化特征,表明夏季黄山气溶胶的氧化性比冬季强.主成分分析(PCA)结果表明,黄山冬季SOA主要来自人为源的长距离传输,而夏季SOA主要是当地生物源经二次氧化形成.气溶胶无机模型(AIM)的计算结果表明,黄山夏季的C_2主要是经酸催化反应二次形成的.     

Performance and microbial community of a membrane bioreactor system——Treating wastewater from ethanol fermentation of food waste

In this study, a lab-scale biological anaerobic/anaerobic/anoxic/membrane bioreactor(A_-~3MBR) was designed to treat wastewater from the ethanol fermentation of food waste,a promising way for the disposal of food waste and reclamation of resources. The 454 pyrosequencing technique was used to investigate the composition of the microbial community in the treatment system. The system yielded a stable effluent concentration of chemical oxygen demand(202 ± 23 mg/L), total nitrogen(62.1 ± 7.1 mg/L), ammonia(0.3 ±0.13 mg/L) and total phosphorus(8.3 ± 0.9 mg/L), and the reactors played different roles in specific pollutant removal. The exploration of the microbial community in the system revealed that:(1) the microbial diversity of anaerobic reactors A_1 and A_2, in which organic pollutants were massively degraded, was much higher than that in anoxic A_3 and aerobic MBR;(2) although the community composition in each reactor was quite different, bacteria assigned to the classes Clostridia, Bacteroidia, and Synergistia were important and common microorganisms for organic pollutant degradation in the anaerobic units, and bacteria from Alphaproteobacteria and Betaproteobacteria were the dominant microbial population in A_3 and MBR;(3) the taxon identification indicated that Arcobacter in the anaerobic reactors and Thauera in the anoxic reactor were two representative genera in the biological process. Our results proved that the biological A_-~3MBR process is an alternative technique for treating wastewater from food waste.     

Simultaneous removal of Cu(II) and Cr(VI) by Mg–Al–Cl layered double hydroxide and mechanism insight

Mg–Al–Cl layered double hydroxide (Cl-LDH) was prepared to simultaneously remove Cu(II) and Cr(VI) from aqueous solution. The coexisting Cu(II) (20 mg/L) and Cr(VI) (40 mg/L) were completely removed within 30 min by Cl-LDH in a dosage of 2.0 g/L; the removal rate of Cu(II) was accelerated in the presence of Cr(VI). Moreover, compared with the adsorption of single Cu(II) or Cr(VI), the adsorption capacities of Cl-LDH for Cu(II) and Cr(VI) can be improved by 81.05% and 49.56%, respectively, in the case of coexisting Cu(II) (200 mg/L) and Cr(VI) (400 mg/L). The affecting factors (such as solution initial pH, adsorbent dosage, and contact time) have been systematically investigated. Besides, the changes of pH values and the concentrations of Mg²⁺ and Al³⁺ in relevant solutions were monitored. To get the underlying mechanism, the Cl-LDH samples before and after adsorption were thoroughly characterized by X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. On the basis of these analyses, a possible mechanism was proposed. The coadsorption process involves anion exchange of Cr(VI) with Cl⁻ in Cl-LDH interlayer, isomorphic substitution of Mg²⁺ with Cu²⁺, formation of Cu₂Cl(OH)₃ precipitation, and the adsorption of Cr(VI) by Cu₂Cl(OH)₃. This work provides a new insight into simultaneous removal of heavy metal cations and anions from wastewater by Cl-LDH.     

Simulated reaction of formaldehyde and ambient atmospheric particulate matter using a chamber

The reaction of HCHO with Beijing winter's real ambient particulate matter(PM) inside a 3.3 m~3 Teflon Chamber was conducted in this study. NO_2, O_3 and H_2O gases were removed from the ambient aerosol before entering into the chamber. The decays of HCHO were monitored(acetylacetone spectrophotometry method) during the reactions at different PM number concentrations(N_a) and relative humidities(RHs), and the formed particulate formate was detected by IC and XPS techniques. The results showed that when RH was10%–15%, the decay rate of HCHO in the chamber was higher with the existence of PM from relatively clean days(with number concentration(N_a) 200,000 particle/L, 0.35–22.5 μm)compared to dirty days(N_a 200,000 particle/L, 0.35–22.5 μm). When RH increased to 30%–45%, PM can hardly have significant influences on the decay of HCHO. The formations of formate on the reacted PM were consistent with the HCHO decay rates at different ambient PM N_aand RH conditions. This is a first study related to the "real" ambient PM reacted with HCHO and suggested that in the clean and low RH days, PM could be an effective medium for the conversion of HCHO to formate.     

三峡库区主要水域典型抗生素分布及生态风险评估

为评价三峡库区主要水域典型抗生素的污染状况和生态风险,利用固相萃取-高效液相色谱-串联三重四极杆质谱联用法（SPE-HPLC-MS/MS）,分析三峡库区长江干流和6条支流表层水体中6类28种抗生素的质量浓度,根据欧盟环境风险评价方法计算RQ_S（风险商值）及RQ_sum（联合风险商值）,并按照Hernando等提出评级方法评价研究区域的生态风险等级.结果表明:三峡库区7条河流共检出4类10种抗生素,质量浓度范围为0.6~218.0 ng/L,其中除OFX（氧氟沙星）和CAP（氯霉素）外,其余8种[SDI（磺胺嘧啶）、SMX（磺胺甲唑）、SMZ（磺胺二甲嘧啶）、ERM（红霉素）、ROM（罗红霉素）、TYL（泰乐菌素）、FF（氟苯尼考）、LIN（林可霉素）]均为畜禽药品,并且FF、LIN在我国畜禽药品中使用量排名居前五位.7条河流抗生素RQ_sum由高到低依次为濑溪河>琼江>綦江>碧溪河>嘉陵江>长江>乌江,其中,濑溪河RQ_sum高达5.532,SMX、ERM和OFX均为高风险,说明其对濑溪河水体中相应的水生生物表现出较高的毒性风险;琼江、綦江、碧溪河和嘉陵江的RQ_sum均处于1~2之间,表现出较高生态风险,但4条河流检出抗生素的单个RQ_S均小于1,处于低风险;长江的RQ_sum为0.605,检出抗生素中TYL、ERM和ROM处于中风险,其余为低风险;乌江的RQ_sum为0.013,检出抗生素均处于低风险,说明水体受人类活动干扰最小.研究显示,三峡库区主要水域中抗生素含量略低于其他水域,但应进一步强化对畜禽养殖行业抗生素使用的监管,开展畜禽粪污还田技术规范中抗生素含量限制的相关研究.      

重庆市夏秋季VOCs对臭氧和二次有机气溶胶生成潜势的估算

为估算重庆市夏秋季VOCs（挥发性有机物）对O₃和SOA（二次有机气溶胶）的生成潜势,利用在线GC-MS/FID在2015年8月22日-9月23日对重庆市区点和郊区点VOCs开展了为期一个月的实时观测,获得市区点和郊区点$ \varphi $（TVOCs）（总挥发性有机物）分别为41.35×10-9和22.72×10-9,其中市区点以烷烃（35.2%）和烯炔烃（25.2%）为主,郊区点以含氧挥发性有机物（oxygenated volatile organic compounds,OVOCs）（30.6%）和烷烃（26.0%）为主.结合最大增量反应活性量化市区点和郊区点VOCs的OFPs（臭氧生成潜势）分别为149.11×10-9和71.09×10-9,市区点OFPs最大的是乙烯、丙烯、甲苯、C8和C9的芳香烃等,郊区点OFPs最大的VOCs是丙烯醛、异戊二烯和甲基乙烯基酮.结合气溶胶生成系数量化郊区点和市区点VOCs对SOA的生成贡献分别为0.36和1.26 μg/m3,相比国内其余城市VOCs的SOAP（二次有机气溶胶生成潜势）较小,主要以甲基环己烷、正壬烷、正葵烷和十一烷等高碳烷烃,以及甲苯、苯、二甲苯和乙苯等芳香烃的SOAP为主.研究显示,控制烯炔烃和芳香烃的浓度有助于控制重庆市O₃的生成,控制高碳烷烃和芳香烃则有助于控制重庆市SOA的生成.      

北京市铺装道路降尘污染特征及来源

为研究北京市道路降尘在不同季节的污染特征及来源,选取北京市4条典型道路得到64个采样点的道路尘样品,采集的道路尘样品经过预处理得到75 μm以下的颗粒物,经过再悬浮及实验室分析得到PM_2.5的粒径分布和化学成分谱.结果表明:不同采样高度及不同道路类型的颗粒物粒径大体分布规律一致,颗粒物质量频率存在三个峰值,分别为0.75 μm（微粒径）、2.50 μm（小粒径）、4.50 μm（大粒径）;各季节的降尘颗粒物的化学组分中质量分数最大的是元素,主要元素（含量>1%）季节变化为冬季>春季>秋季>夏季,元素富集因子法得到污染元素为Cr、Cd、Sn、Cu、Zn、Pb、As,双重元素为Bi、Ti、Ni、W、Mg、Ca、TI、Mo、V、Fe、Zr、Ba,其余16种为非富集元素;颗粒物中离子质量分数在夏季最大为9.31%,春季、秋季、冬季的离子质量分数相差不大,其中Ca2+、NO₃-、Cl-、SO₄2-占总离子质量的80%左右;碳素中w（OC）和w（EC）的季节变化均为夏季>秋季>春季>冬季,OC/EC[w（OC）/w（EC）]的季节变化规律为冬季>春季>秋季>夏季.不同季节w（OC）和w（EC）的相关性大小为夏季>秋季>春季>冬季.对PM_2.5中化学组分来源分析表明,污染元素受机动车和建筑尘影响较大,与机动车尾气相比,机动车磨损造成的污染也不容小视;燃煤影响一直存在,但供暖期污染有所改善.机动车尾气、建筑尘及土壤尘对离子均有贡献,在夏季土壤尘、建筑尘、二次反应的综合影响较大,春季土壤尘影响更为突出.碳在夏秋季节受汽车尾气和建筑尘的影响较大,夏季二次反应影响不大;冬季除气象因素外,燃煤和生物质燃烧也不可忽视;春季土壤尘影响较为突出.