城乡接合部居民楼火灾风险评价及防控对策研究

为了准确探究城乡接合部居民楼火灾事故致因机理,预防与控制城乡接合部日常生产与生活过程中引发火灾事故的有效途径,建立信息面更全、实际性更强的火灾风险评估模型是目前行之有效的手段。基于湖南省某地发生火灾事故的实际情况,根据事故树分析法,以城乡接合部居民楼火灾事故为顶事件构建事故树,计算得到事故树的最小割集、最小径集和结构重要度,研究城乡接合部居民楼火灾事故的发生模式、致因因素及影响程度,为改善城乡接合部居民楼火灾安全提供重要的理论依据,并提出相应的防控措施及对策。     

基于24Model的矿工怠工行为 管理模式架构及策略研究

为减少矿工怠工行为,基于24Model研究矿工怠工行为的管理模式架构及策略。首先,基于冰山模型理论分析矿工怠工行为的影响因素;其次,基于24Model和行为修正理论提出集怠工行为识别、行为原因分析、行为管理策略选择和行为修正评估于一体的矿工怠工行为管理模式架构;最后,提出了针对性的管理策略。对于提高煤矿企业矿工的工作绩效具有重要的理论意义和实践价值。     

危险废物处置综合废水处理系统优化研究

固体废物处置中心能够对多种固体废物和危险废物进行处置,在处置过程中产生的废水水质复杂,因此需要对废水进行综合处理,去除废水中的重金属和有机物。为了达到废水排放标准,以某固体废物处置中心的废水处理设施为研究对象,对处理设施中的还原沉淀和曝气生物滤池等环节进行优化,得出其最优的运行参数,结果显示:亚铁与六价铬物质量比为20∶1,曝气气水比为4,水力停留时间为2h时,出水的各项检测指标均达到废水排放标准限值。     

雷管壳体安全检测过程的模拟与检测时间的确定

采用数值模拟与现场试验相结合的方法,分析了带缺陷雷管在气压检测过程中气体的泄漏过程,确定了最佳的检测时间。采用Fluent建立了缺陷雷管正气压检测模型,分析了缺陷在不同位置处的气体泄漏过程,研究了气体泄漏过程中,雷管内部气压的分布及其随时间变化过程,结果表明:距雷管顶端的缺陷因尺寸较大,所以该泄漏点的压强要大于侧壁处,而气体泄漏流速小于侧壁处,综合分析缺陷处和雷管内部的气体压降过程及试验,可确定4s为最佳的充气时间,5s作为最佳的雷管质量诊断时间。     

氢安全研究现状及面临的挑战

氢能具有储运便捷、来源多样、洁净环保等突出优点,许多国家把发展氢能作为重要的能源战略。氢安全是氢能大规模商业化应用的重要保障。在分析国内外氢安全领域近年来最新研究进展的基础上,依次从氢泄漏与扩散、氢燃烧与爆炸、氢与金属材料相容性及氢风险评价等方面,系统总结了国内外氢安全研究面临的挑战,并对我国氢安全的发展提出了建议。     

平原河网地区非点源污染风险差异化分区防控研究

土地利用优化和空间防控策略对非点源污染风险控制及水环境质量的改善具有重要意义。本文以太湖流域典型平原河网地区-上海市青浦区为研究对象,将灰色线性规划模型与最小累积阻力模型相结合,以控制非点源污染风险和增加经济效益、生态效益为目标,进行土地利用结构优化与空间分区防控研究,在空间上划设了水资源保育区、水资源重点防护区、非点源污染一般阻控区、非点源污染中等阻控区及非点源污染重点阻控区,并针对不同分区提出具有针对性的防控措施。与2012年相比,预测2020年优化防控方案下,可减少总氮、总磷的输出10.96%和41.33%。由此表明,优化土地利用结构和构建空间差异化防控机制是有效调控非点源污染风险,实现区域可持续土地利用,促进经济发展和保证生态环境安全的有效途径。     

含阶梯结构的高层楼梯井内烟气湍流及输运特征量的全局敏感性分析

高层建筑竖井火灾中影响因素众多,并且各因素对高层楼梯井火灾中重要现象、关键数值等的影响大小不一,使得此类火灾中的实验或理论研究成本较高。通过建立全局敏感性分析平台,定量考察了高层楼梯井结构所涉及因素的影响大小,并能够方便地筛选掉对所考察量影响较小的因素,以降低实验或计算成本。使用数值模拟方法,通过CFD软件对包含阶梯几何框架的高层楼梯井结构火灾进行了共计60次工况计算。并且根据计算结果,使用全局参数敏感性分析方法,得出建筑尺寸、热释放速率、环境参数对高层楼梯井内烟气湍流特性及输运特性的敏感性排序。结果表明,火源热释放速率对各输出参数的影响均占38%以上。     

Determination of trace metal concentrations in soil profiles of municipal waste dumps in Nigeria

The concentrations of trace metals (Cd, Pb, Cu, Cr, Fe, Ni, Zn and Co) were studied in soil profiles of eight municipal waste dump sites in Warri metropolis. The results indicate that concentrations of trace metals varied widely among the different dumpsites and decreased with depths in a studied soil profile. The accumulation pattern for the heavy metals in the soil profiles follows the order: Fe > Pb > Mn > Co > Cr > Zn > Ni > Cu > Cd. The concentrations of metals found in these sites was below the Canadian remediation criteria for land for agricultural, residential and commercial/industrial purposes except for the cadmium levels in some sites that exceeded criterion values for agricultural and residential. In such sites, remedial actions are required before any form of chosen development can take place. The levels of heavy metals found in these dump sites were higher than that of the control site. The examined metals showed no significant correlation with soil physicochemical properties at the surface horizon, which is suggestive evidence that these metals arise from anthropogenic input.     

Critical Review of Norms and Standards for Biodegradable Agricultural Plastics Part II: Composting

The critical review of norms and standards and corresponding tests to determine the compostability of biodegradable plastics, possibly applicable also to biodegradable agricultural plastics, shows that many norms concerning testing and labelling of compostable plastics have been established at the international level. Some of them are about plastic materials, some others are about products like packaging. The media and conditions of testing cover mainly the conditions designed for industrial composting facilities, and only a few concern home composting conditions. Considering that the end of life management of biodegradable agricultural plastic products will be done at the farm to reduce the management of the waste and also its cost, only a few of these norms are considered to be suitable for adaptation to cover also biodegradable agricultural plastic products. The biodegradability validation criteria under composting conditions, such as the threshold percentage of biodegradation and disintegration, the time and temperature, and the ecotoxicity, are presented for the main norms and standard testing methods. Based on these different norms and their content, a list of specs and technical requirements that could be adapted to meet farm composting conditions for agricultural compostable plastics is proposed. These requirements may be used as criteria for the establishment of a new integrative norm for agricultural compostable plastics.     

Research on Methods for Building Volcano Disaster Information System--taking Changbai Mountain as an example

1IntroductionAs a many-volcano-distributed country,China is covered with many volcanoes and lava rocks.A-mong the one-thousand-or-so volcanoes,Changbai Mountain Volcano,Wudalianchi Volcano,Tengchong Volcano and Ashikule Volcano of West Kunlun are the mostlatentcatastrophic erup-tive active volcanoes.In recent years,the activity of the earth' s crust in some volcanic areas isobviously becoming increasing violent.Butfew scholars have monitored and evaluated volcano inChina.So building VDI…