Modelling nitrogen fluxes at the landscape scale

The distribution and impacts of different nitrogen pollutants are inextricably linked. To understand the problem fully, the interactions between the different pollutants need to be taken into account. This is particularly important when it comes to abatement techniques, since measures to reduce emissions of one nitrogen pollutant can often lead to an increase in another. This project represents a step towards greater understanding of these issues by linking together new and existing nitrogen flux models into a larger framework. The modelling framework has been constructed and some of the nitrogen flows between fields, farms and the atmosphere have been modelled for a UK study area for typical farm management scenarios.     

Rapid amino acid cycling in arctic and antarctic soils

Amino acids constitute one of the largest inputs of organic nitrogen (N) to most polar soils and have been hypothesized to be important in regulating vegetational succession and productivity in Arctic ecosystems. Our understanding of amino acid cycling in these soils, however, is poor. The aim of this study was to investigate the size and rate of turnover of the amino acid pool in a range of Arctic and Antarctic soils. Our results indicate that in polar soils with either high or low ornithogenic inputs the amino acid pool is small in comparison to the inorganic N pool (NO^–₃ and NH⁺₄). The free amino acid pool constituted only a small proportion of the total dissolved organic nitrogen (DON) pool in these soils. Here we show that these low concentrations may be due to rapid use by the soil microbial community in both Arctic and Antarctic soils. The turnover of the amino acid pool in soil was extremely rapid, with a half-life ranging from 2 to 24 h, indicating that this N pool can be turned over many hundred times each summer when polar soils are frequently unfrozen. The implications of amino acids in N cycling and plant and microbial nutrition are discussed.     

Applying metabolic fingerprinting to ecology: The use of Fourier-transform infrared spectroscopy for the rapid screening of plant responses to N deposition

The potential for metabolic fingerprinting via Fourier-transform infrared (FT-IR) spectroscopy to provide a novel approach for the detection of plant biochemical responses to N deposition is examined. An example of spectral analysis using shoot samples taken from an open top chamber (OTC) experiment simulating wet ammonium deposition is given. Sample preparation involved oven drying and homogenisation via mill grinding. Slurries of a consistent dilution were then prepared prior to FT-IR analysis. Spectra from control, 8 and 16 kg N ha^–1 yr^–1 treatments were then subjected to cross-validated discriminant function analysis. Ordination diagrams showed clear separation between the three N treatments examined. The potential for using Calluna vulgaris (L.) Hull as a bioindicator of N deposition is further evident from these results. The results also clearly demonstrate the power of FT-IR in discriminating between subtle phenotypic alterations in overall plant biochemistry as affected by ammonium pollution.     

多级模糊综合评判方法在泥石流评价中的应用

介绍了多级模糊综合评判方法在泥石流评价中的应用, 指出了在进行模糊评判的时候,评判因子的选取以及隶属函数的构造应具体结合泥石流自身的特点来进行,并应用此方法对西南某拟建水电站坝址附近泥石流沟危险性做出了评价,评价结果与实际调查结果比较吻合.     

黄河积石峡水电站库区泥石流危险度评价

在选取一次(可能)最大冲出物方量、泥石流发生频率、流域面积、主沟长度、流域相对高差、流域切割密度、泥沙补给段长度比7个因子为泥石流沟谷危险度划分的主要因子的基础上,对评价因子隶属度的确定作了分析和阐述,并运用模糊综合评判法对黄河上游积石峡水电站库区16条泥石流沟进行了危险度划分.     

略阳电厂后部山体边坡的稳定性评价与初步治理设计

在对略阳电厂后部山体地质条件分析的基础上,采用定性分析与定量数值计算相结合的方法评价了电厂后部山体在开挖前后的稳定性问题,并对开挖后的坡体提出了相应的工程治理措施.     

山东省主要气象灾害及其防御对策

简述了山东省的主要气象灾害,提出了相应的防御对策.     

中国湿地现状综述

湿地是重要的自然资源,对人类生存起着重要作用。本文综述了湿地的含义、功能与 价值、中国湿地的特点与现状,以促进中国湿地的可持续发展与利用。     

后张梁管道摩阻损失测试技术与数据处理

针对常规测试中存在的问题 ,改进了管道摩阻损失的测试方法 ,消除了喇叭口等因素影响 ,使得管道摩阻测试更加合理和准确。介绍了后张法预应力管道摩阻损失的计算 ,结合秦沈客运专线双线整孔简支箱梁的管道摩阻损失测试 ,利用最小二乘原理对测试数据进行处理 ,得到了摩阻系数 μ和k的计算公式 ,所得参数为施工提供了依据。最后讨论了摩阻系数对张拉控制应力的影响 ,提出现场测试的一般性原则和要求。     

复杂矿井通风系统角联风路自动识别方法的研究

角联风路的识别与稳定性分析是矿井通风系统稳定性与可靠性分析理论中的核心内容之一。笔者对通风系统角联风路进行了深入的研究;分析了通路法的局限性,简化了角联风路的数学模型,提出了快速、准确、灵活的角联风路自动识别的新方法——节点位置法;编写了角联风路自动识别软件,并应用现场数据进行测试,将其结果与通路法的结果进行了比较分析;证明了节点位置法是切实可行的。