Global warming contributions from wheat,sheep meat and wool production in Victoria,Australia – a life cycle assessment

This paper compares the life cycle global warming potential of three of Australia’s important agricultural production activities – the production of wheat, meat and wool in grazed subterranean clover (sub-clover) dominant pasture and mixed pasture (perennial ryegrass/phalaris/sub-clover/grass and cape weed) systems. Two major stages are presented in this life cycle assessment (LCA) analysis: pre-farm, and on-farm. The pre-farm stage includes greenhouse gas (GHG) emissions from agricultural machinery, fertilizer, and pesticide production and the emissions from the transportation of these inputs to paddock. The on-farm stage includes GHG emissions due to diesel use in on-farm transport and processing (e.g. seeding, spraying, harvesting, topdressing, sheep shearing), and non-CO₂ (nitrous oxide (N₂O), and methane (CH₄)) emissions from pastures and crop grazing of lambs.The functional unit of this life cycle analysis is the GHG emissions (carbon dioxide equivalents – CO₂ -e) from 1 kg of wheat, sheep meat and wool produced from sub-clover, wheat and mixed pasture plots. The GHG emissions (e.g. CO₂, N₂O and CH₄ emission) from the production, transportation and use of inputs (e.g. fertilizer, pesticide, farm machinery operation) during pre-farm and on-farm stages are also included. The life cycle GHG emissions of 1 kg of wool is significantly higher than that of wheat and sheep meat. The LCA analysis identified that the on-farm stage contributed the most significant portion of total GHG emissions from the production of wheat, sheep meat and wool. This LCA analysis also identified that CH₄ emissions from enteric methane production and from the decomposition of manure accounted for a significant portion of the total emissions from sub-clover and mixed pasture production, whilst N₂O emissions from the soil have been found to be the major source of GHG emissions from wheat production.     

MR imaging of the fetal musculoskeletal system

Magnetic resonance imaging (MRI) appears to be increasingly used, in addition to standard ultrasonography for the diagnosis of abnormalities in utero. Previous studies have recently drawn attention to the technical refinement of MRI to visualize the fetal bones and muscles. Beyond commonly used T2-weighted MRI, echoplanar, thick-slab T2-weighted and dynamic sequences, and three-dimensional MRI techniques, are about to provide new imaging insights into the normal and the pathological musculoskeletal system of the fetus. This review emphasizes the potential significance of MRI in the visualization of the fetal musculoskeletal system. © 2012 John Wiley & Sons, Ltd.     

Heavy metals in potable groundwater of mining-affected river catchments,northwestern Romania

Groundwater, accessed using wells and municipal springs, represents the major source of potable water for the human population outside of major urban areas in northwestern Romania, a region with a long history of metal mining and metallurgy. The magnitude and spatial distribution of metal contamination in private-supply groundwater was investigated in four mining-affected river catchments in Maramureş and Satu Mare Counties through the collection of 144 groundwater samples. Bedrock geology, pH and Eh were found to be important controls on the solubility of metals in groundwater. Peak metal concentrations were found to occur in the Lapuş catchment, where metal levels exceed Dutch target and intervention values in up to 49% and 14% of samples, respectively. A 700 m wide corridor in the Lapuş catchment on either side of the main river channel was identified in which peak Cd (31 μg l⁻¹), Cu (50 μg l⁻¹), Pb (50 μg l⁻¹) and Zn (3,000 μg l⁻¹) concentrations were found to occur. Given the generally similar bedrock geologies, lower metal levels in other catchments are believed to reflect differences in the magnitude of metal loading to the local environment from both metal mining and other industrial and municipal sources. Sampling of groundwater in northwestern Romania has indicated areas of potential concern for human health, where heavy metal concentrations exceed accepted environmental quality guidelines. The presence of elevated metal levels in groundwater also has implications for the implementation of the EU Water Framework Directive (WFD) and achieving ‘good’ status for groundwater in this part of the Danube River Basin District (RBD).     

Response of “Alamo” switchgrass tissue chemistry and biomass to nitrogen fertilization in West Tennessee,USA

Switchgrass (Panicum virgatum) is a perennial, warm-season grass that has been identified as a potential biofuel feedstock over a large part of North America. We examined above- and belowground responses to nitrogen fertilization in “Alamo” switchgrass grown in West Tennessee, USA. The fertilizer study included a spring and fall sampling of 5-year old switchgrass grown under annual applications of 0, 67, and 202 kg N ha^?1 (as ammonium nitrate). Fertilization changed switchgrass biomass allocation as indicated by root:shoot ratios. End-of-growing season root:shoot ratios (mean ± SE) declined significantly (P ≤ 0.05) at the highest fertilizer nitrogen treatment (2.16 ± 0.08, 2.02 ± 0.18, and 0.88 ± 0.14, respectively, at 0, 67, and 202 kg N ha^?1). Fertilization also significantly increased above- and belowground nitrogen concentrations and decreased plant C:N ratios. Data are presented for coarse live roots, fine live roots, coarse dead roots, fine dead roots, and rhizomes. At the end of the growing season, there was more carbon and nitrogen stored in belowground biomass than aboveground biomass. Fertilization impacted switchgrass tissue chemistry and biomass allocation in ways that potentially impact soil carbon cycle processes and soil carbon storage.     

Development of an ombrotrophic peat bog (low ash) reference material for the determination of elemental concentrations

Given the increasing interest in using peat bogs as archives of atmospheric metal deposition, the lack of validated sample preparation methods and suitable certified reference materials has hindered not only the quality assurance of the generated analytical data but also the interpretation and comparison of peat core metal profiles from different laboratories in the international community. Reference materials play an important role in the evaluation of the accuracy of analytical results and are essential parts of good laboratory practice. An ombrotrophic peat bog reference material has been developed by 14 laboratories from nine countries in an inter-laboratory comparison between February and October 2002. The material has been characterised for both acid-extractable and total concentrations of a range of elements, including Al, As, Ca, Cd, Cr, Cu, Fe, Hg, Mg, Mn, Na, Ni, P, Pb, Ti, V and Zn. The steps involved in the production of the reference material (i.e. collection and preparation, homogeneity and stability studies, and certification) are described in detail.     

New hydroepidemiological models of indicator organisms and zoonotic pathogens in agricultural watersheds

Simple analytical models are derived to assess how a series of cattle animal farms affect the transport and fate of an indicator organism (Escherichia coli) and a zoonotic pathogen (Campylobacter) in a stream. Separate steady-state mass-balance models are developed and solved for the ultimate minimum and maximum concentrations for the two organisms. The E. coli model assumes that the organism is ubiquitous and abundant in the animals’ digestive tracts. In contrast, a simple dose-response model is employed to relate the Campylobacter prevalence to drinking water drawn from the stream. Because faecal indicators are commonly employed to assess the efficacy of best management practice (BMP) interventions, we also employ the models to assess how BMPs impact pathogen levels. The model provides predictions of (a) the relative removal efficacy for Campylobacter and (b) the prevalence of Campylobacter infection among farm animals after implementation of BMPs. Dimensionless numbers and simple graphs are developed to assess how prevalence is influenced by a number of factors including animal density and farm spacing. A significant outcome of this model development is that the numerous dimensional input and parameter variables are reduced to a group of just four dimensionless Campylobacter-related quantities, characterizing: animal density; in-stream attenuation; animal-to-animal transmission; and infection recovery. Calculations reveal that for some constellations of these four quantities there can be a greater-than-expected benefit in that the proportional reduction of stream Campylobacter concentrations post-BMP can substantially exceed the proportional reduction of concentrations of E. coli in that stream. In addition, a criterion for system sterility (i.e., the conditions required for the farm infection rate to decrease with downstream distance) is derived.     

Combined effects of flow condition and parasitism on shoaling behaviour of female guppies Poecilia reticulata

Group living in fish can provide benefits of protection from predators and some parasites, more efficient foraging for food, increased mating opportunities and enhanced energetic benefit when swimming. For riverine species, shoaling behaviour can be influenced by various environmental stressors, yet little is known how flow rate might influence the shoaling of diseased fish shoals. In view of the increasingly unpredictable flow rates in streams and rivers, this study aimed to assess the combined effect of flow condition and parasitism on the shoaling behaviour of a model fish species. Shoal size, shoal cohesion and time spent shoaling of female guppies Poecilia reticulata were compared when infected with the directly transmitted ectoparasite Gyrodactylus turnbulli under flow and static conditions. Flow condition was an important factor in influencing shoaling behaviour of guppies with the fish forming larger shoals in the absence of flow. When a shoal member was infected with G. turnbulli, shoal cohesion was reduced, but the magnitude of this effect was dependent on flow condition. In both flow and static conditions, bigger fish formed larger shoals than smaller counterparts. Future changes to stream hydrology with more frequent flooding and drought events will affect the shoaling tendency of fish. During high-flow events, diseased fish may not be able to keep up with shoal mates and therefore have a higher risk of predation. Additionally, these findings may be important for aquaria and farmed species where an increase in flow rate may reduce aggregation in fish.     

Observations of 2,4,6-trichlorophenol degradation by ozone

The aqueous reactivity of 2,4,6-trichlorophenol (TCP) with ozone has been studied at laboratory-scale using a simple gas bubble/liquid contacting system. Degradation rate constants were measured directly and found to be 7.6 and 77.2 M(-1)s(-1) at pH 2 and 7.5, respectively. At pH 7.5, 10 min of ozonation ( identical with 15 mM ozone consumption) achieved a 90% degradation of TCP, which corresponded to the release of approximately 2 mol Cl(-) per mol TCP. The presence of hydrogen peroxide in solution did not significantly increase the TCP degradation but increased the overall dechlorination to 2.7 mol Cl(-) per mol TCP. The presence of humic acid (HA) in solution was found to enhance the degradation rate of TCP at low relative HA concentrations (<0.6 g/g HA:TCP), but to reduce the rate at higher HA concentrations.     

A risk model for predicting the effects of lake-side development on wildfowl populations

The lack of quantitative analysis and general scientific rigour in environmental impact assessment (EIA) is well documented. While reasons for this may include political and economic factors, the lack of high-level statistical knowledge and skills in environmental consultancies probably contributes to the problem, particularly with regard to ecological studies. This paper develops a simple model for wintering wildfowl populations that predicts different levels of risk from lake-side development. The aim was to create a model that could be used easily and quickly by consultants, is readily understandable for developers and various groups associated with the planning process, with explicit assumptions that can be criticised, and predictions that can be tested with post-development audits. The model is used in a case study. The basic parameters of the model are (i) average wildfowl abundance on lakes before development, (ii) maximum potential density of wildfowl across lakes (Kmax) before development, and (iii) reduction in lake area suitable for wildfowl after development. The model includes abundance-area relationships that are useful for highlighting the importance of particular lakes at a site. In the case study, abundance-area relationships focused attention on two lakes with thick charophyte beds which supported higher than expected numbers of pochard and coot given their size. As well as being robust (confidence limits are calculated), the model's predictions are quantitative and testable, making it possible to compare the predictions with on-going post-development monitoring of wildfowl population levels. The predictions rely on the effectiveness of path screening, and post-development monitoring can suggest where screening should be strengthened if the model's predictions are not met. Similarly, if other assumptions in the model are not met by the development, appropriate action can be implemented.