Co-pyrolysis of swine manure with agricultural plastic waste: Laboratory-scale study

Manure-derived biochar is the solid product resulting from pyrolysis of animal manures. It has considerable potential both to improve soil quality with high levels of nutrients and to reduce contaminants in water and soil. However, the combustible gas produced from manure pyrolysis generally does not provide enough energy to sustain the pyrolysis process. Supplementing this process may be achieved with spent agricultural plastic films; these feedstocks have large amounts of available energy. Plastic films are often used in soil fumigation. They are usually disposed in landfills, which is wasteful, expensive, and environmentally unsustainable. The objective of this work was to investigate both the energetics of co-pyrolyzing swine solids with spent plastic mulch films (SPM) and the characteristics of its gas, liquid, and solid byproducts. The heating value of the product gas from co-pyrolysis was found to be much higher than that of natural gas; furthermore, the gas had no detectable toxic fumigants. Energetically, sustaining pyrolysis of the swine solids through the energy of the product gas could be achieved by co-pyrolyzing dewatered swine solids (25% m/m) with just 10% SPM. If more than 10% SPM is used, the co-pyrolysis would generate surplus energy which could be used for power generation. Biochars produced from co-pyrolyzing SPM and swine solid were similar to swine solid alone based on the surface area and the ¹H NMR spectra. The results of this study demonstrated the potential of using pyrolysis technology to manage two prominent agricultural waste streams (SPM and swine solids) while producing value-added biochar and a power source that could be used for local farm operations.     

Mowers versus growers: Riparian buffer management in the Southern Blue Ridge Mountains,USA

Despite long-standing knowledge of the benefits of riparian buffers for mitigating nonpoint source pollution, many streams are unprotected by buffers. Even landowners who understand ecological values of buffers mow riparian vegetation to the streambank. Do trends in rural riparian conditions reflect the development of riparian forest science? What motivates residential riparian management actions? Using high-resolution orthoimagery, we quantified riparian conditions and trends between 1998 and 2015 in the rural upper Little Tennessee River basin in Macon County, North Carolina and explored how landowners view riparian zone management and riparian restoration programs. Buffer composition in 2015 was as follows: no buffer (32.5%), narrow (19.3%), forested (26.7%), shrub (7.2%), and intermediate (7.0%). Relative to 1998, the greatest decrease occurred in the no buffer class (−17.7%, 46 km) and the largest increases occurred in the shrub (+72.5%, 20 km) and narrow (12.6%, 14 km) classes. Forested buffer marginally increased. Semi-structured interview data suggest that landowners prioritize recreational and scenic aspects of riparian buffers over ecological functions such as filtration and bank stabilization. Riparian restoration programs might be made more enticing to non-adopters if outreach language appealed to landowner priorities, design elements demonstrated intentional management, and program managers highlighted areas where ecological goals and landowner values align.     

The role of digital data entry in participatory environmental monitoring

Many argue that monitoring conducted exclusively by scientists is insufficient to address ongoing environmental challenges. One solution entails the use of mobile digital devices in participatory monitoring (PM) programs. But how digital data entry affects programs with varying levels of stakeholder participation, from nonscientists collecting field data to nonscientists administering every step of a monitoring program, remains unclear. We reviewed the successes, in terms of management interventions and sustainability, of 107 monitoring programs described in the literature (hereafter programs) and compared these with case studies from our PM experiences in Australia, Canada, Ethiopia, Ghana, Greenland, and Vietnam (hereafter cases). Our literature review showed that participatory programs were less likely to use digital devices, and 2 of our 3 more participatory cases were also slow to adopt digital data entry. Programs that were participatory and used digital devices were more likely to report management actions, which was consistent with cases in Ethiopia, Greenland, and Australia. Programs engaging volunteers were more frequently reported as ongoing, but those involving digital data entry were less often sustained when data collectors were volunteers. For the Vietnamese and Canadian cases, sustainability was undermined by a mismatch in stakeholder objectives. In the Ghanaian case, complex field protocols diminished monitoring sustainability. Innovative technologies attract interest, but the foundation of effective participatory adaptive monitoring depends more on collaboratively defined questions, objectives, conceptual models, and monitoring approaches. When this foundation is built through effective partnerships, digital data entry can enable the collection of more data of higher quality. Without this foundation, or when implemented ineffectively or unnecessarily, digital data entry can be an additional expense that distracts from core monitoring objectives and undermines project sustainability. The appropriate role of digital data entry in PM likely depends more on the context in which it is used and less on the technology itself.     

14C‐labeled aflatoxin B1 prepared with yeastlike cultures of Aspergillus parasiticus

Abstract

A simple method was developed to produce ¹⁴C‐labeled aflatoxin B₁ by using the yeastlike phase of Aspergillus parasiticus NRRL 2999. Yeastlike cultures resulted from absence of manganese in a synthetic medium. Sodium acetate‐1‐¹⁴C had a 0.22% average incorporation; sodium acetate‐1,2‐¹⁴C, 0.70%. The average yield of labeled B₁ was 10 mg/500 ml medium with an average specific activity of either 63.3 mCi/mole (C‐l label) or 194.3 mCi/mole (C‐1, 2 label).     

Determining the Costs of Air Pollution Control

A general procedure has been described that can be followed for estimating the cost of reducing air pollution emissions within a metropolitan region. The six step procedure examines emission inventories, regional trends, control trends, alternate control schemes, control costs, and optimum cost-effectiveness. The procedure is illustrated for one emission source in the Delaware Valley. By application of “feasible controls,” automobile emissions were shown to be reduced from 4.5 billion pounds per year in the Region during 1968 to 1.5 billion pounds in the year 2000. Annual control costs during the same period will increase from $30 million to over $300 million per year. This represents a cost increase from $15 per registered vehicle in 1968 to about $58 per vehicle per year in 2000. A method was illustrated for determining minimum cost to achieve any desired degree of emission reduction where alternate feasible control schemes are available. This method is especially useful where the allocation of scarce resources is involved. The general procedure is applicable to any number of pollutants and emission sources, and may be useful for calculations in any metropolitan area. The objectives of the present study are to apply this method to other sources within the Delaware Valley and to determine total regional costs for various levels of emission reduction. As one example of a practical application for this type of analysis, the economic impact of regulatory schemes can be evaluated on a cost-effectiveness basis     

Depolarising the 'Broadened' and 'Back-to-basics' Relief Models

Prompted by the calls in recent years to link relief practice to peace-building, development, or both, several conferences and papers have recently mounted a strong critique, seeing these 'broadenings' of relief as 'eroding' or 'corrupting' core humanitarian principles and playing into neo-isolationist agendas to slash humanitarianism. This paper argues that whereas these critiques have important goals in mind when they encourage a concentration on the basics of relief, there has been a loss of subtlety in the ensuing debate. Considering each element of the debate in turn, the paper argues that there is more common ground between 'new' and 'old', 'broadened' and 'basics' relief than at first appears. In concluding, it is argued that further research on key questions, and an openness to hear all perspectives will get us further than entrenched positions and rallying cries.     

Fetal cells and DNA in maternal blood

Although fetal cells have been known to escape to the maternal circulation for a number of years, research attempts to use them for prenatal diagnosis have not had any consistent success. This review attempts to trace the history of such attempts and to document their progress and reasons for success or failure. The opinions of recent conferences including that of the US National Institute of Child Health and Human Development, a sponsor of major US research in the field, are reported and discussed. It is concluded that although basic work has demonstrated the biologic availability of both fetal cells and their free DNA representatives in the maternal circulation at gestational ages relevant to prenatal diagnosis, much work remains to develop practical technology for their consistent recovery and assay. Copyright © 2003 John Wiley & Sons, Ltd.     

Interactions of chlorpyrifos with colloidal materials in aqueous systems

An understanding of sorptive processes is key to describing the fate of chlorpyrifos [O,O-diethyl-O-(3, 5, 6-trichloro-2-pyridyl) phosphorothioate] in aquatic environments. The objectives of this study were to evaluate isotherms for adsorption and desorption of chlorpyrifos on colloidal materials and to advance understanding of interaction mechanisms between chlorpyrifos and colloidal materials. Six Ca-saturated reference smectites, one Ca-saturated humic acid (Ca-humate), and one suspended sediment sample, collected from the Upper Cedar River, Iowa, were studied. A batch equilibration technique was employed to quantify adsorption and desorption isotherms for chlorpyrifos over the 0 to 100 microg L(-1) concentration range in a 0.01 M CaCl(2) background. Large differences in sorption affinity and variation in desorption hysteresis were found among the smectites. Neither chlorpyrifos adsorption nor its desorption were correlated with cation exchange capacity, surface area, or surface charge density of the smectites. The evidence suggests that physical interaction between chlorpyrifos and smectites is the dominant mechanism for adsorption of chlorpyrifos in aqueous systems. Chlorpyrifos was very strongly sorbed on Ca-humate and was not desorbed from the Ca-humate back into the aqueous solution. Chlorpyrifos was moderately sorbed on river sediment, and a large adsorption-desorption hysteresis was also found. The study implies that the nature of both organic and inorganic materials in suspended sediment can influence the adsorption-desorption behavior of chlorpyrifos in aqueous systems.     

In situ treatment of metals in contaminated soils with phytate

Batch experiments were conducted to evaluate the ability of various forms of phytate, the hexaphosphoric form of myo-inositol (IP6), to immobilize U, Ni, and other inorganic contaminants in soils and sediments. A Ca-phytate precipitate (Ca(n)-IP6), dodeca sodium-phytate (Na12-IP6), and hydroxyapatite (HA) were added to contaminated soil at rates of 0, 10, 25, and 50 g kg(-1) and equilibrated in 0.001 M CaCl2. The samples were then centrifuged, the solution pH was measured, and the supernatants were filtered prior to analysis for dissolved organic carbon (DOC), U, Ni, P, and other inorganic contaminants, such as As, Cr, Se, and Pb. The residual sediments were air-dried prior to characterization by analytical electron microscopy and extraction with the Toxicity Characteristic Leaching Procedure (TCLP). The solubility of several metals (e.g., U, Pb, Cu) increased with increasing Na12-IP6 when compared with the nonamended control. In some cases immobilization was observed at the lowest Na12-IP6 application rate (10 g kg(-1)) with an increase in solubility observed at the higher rates, demonstrating the importance of metal to ligand ratio. In contrast, Ca(n)-IP6 and HA decreased the solubility of U, Ni, Al, Pb, Ba, Co, Mn, and Zn. For example, soluble U decreased from 2242 to 76 microg kg(-1) and Ni from 58 to 9.6 mg kg with the Ca(n)-IP6 addition, similar to the results observed for HA. Arsenic and Se solubility increased for HA and both forms of IP6, but to a much greater degree for Na12-IP6, suggesting that the increase in pH observed for HA and Na12-IP6, combined with added competition from PO4 and IP6 for sorption sites, resulted in the release of sorbed oxyanion contaminants. The analytical electron microscopy results indicated that metals such as U and Ni were closely associated with secondary Al-rich precipitates in the HA-treated soils, rather than unreacted HA. The analytical electron microscopy results were less definitive for the Ca(n)-IP6-treated soil, although the residual P-containing material was enriched in Al, with lesser amounts of U and Ni.