Quality-assured measurements of animal building emissions: particulate matter concentrations

Federally funded, multistate field studies were initiated in 2002 to measure emissions of particulate matter (PM) < 10 microm (PM10) and total suspended particulate (TSP), ammonia, hydrogen sulfide, carbon dioxide, methane, nonmethane hydrocarbons, and odor from swine and poultry production buildings in the United States. This paper describes the use of a continuous PM analyzer based on the tapered element oscillating microbalance (TEOM). In these studies, the TEOM was used to measure PM emissions at identical locations in paired barns. Measuring PM concentrations in swine and poultry barns, compared with measuring PM in ambient air, required more frequent maintenance of the TEOM. External screens were used to prevent rapid plugging of the insect screen in the PM10 preseparator inlet. Minute means of mass concentrations exhibited a sinusoidal pattern that followed the variation of relative humidity, indicating that mass concentration measurements were affected by water vapor condensation onto and evaporation of moisture from the TEOM filter. Filter loading increased the humidity effect, most likely because of increased water vapor adsorption capacity of added PM. In a single layer barn study, collocated TEOMs, equipped with TSP and PM10 inlets, corresponded well when placed near the inlets of exhaust fans in a layer barn. Initial data showed that average daily mean concentrations of TSP, PM10, and PM2.5 concentrations at a layer barn were 1440 +/- 182 microg/m3 (n = 2), 553 +/- 79 microg/m3 (n = 4), and 33 +/- 75 microg/m3 (n = 1), respectively. The daily mean TSP concentration (n = 1) of a swine barn sprinkled with soybean oil was 67% lower than an untreated swine barn, which had a daily mean TSP concentration of 1143 +/- 619 microg/m3. The daily mean ambient TSP concentration (n = 1) near the swine barns was 25 +/- 8 microg/m3. Concentrations of PM inside the swine barns were correlated to pig activity.     

Projections of highway vehicle population,energy demand,and CO2 emissions in India to 2040

This paper presents projections of motor vehicles, oil demand, and carbon dioxide (CO₂) emissions for India through the year 2040. The populations of highway vehicles and two‐wheelers are projected under three different scenarios on the basis of economic growth and average household size in India. The results show that by 2040, the number of highway vehicles in India would be 206‐309 million. The oil demand projections for the Indian transportation sector are based on a set of nine scenarios arising out of three vehicle‐growth and three fuel‐economy scenarios. The combined effects of vehicle‐growth and fuel‐economy scenarios, together with the change in annual vehicle usage, result in a projected demand in 2040 by the transportation sector in India of 404‐719 million metric tons (8.5‐15.1 million barrels per day). The corresponding annual CO₂ emissions are projected to be 1.2‐2.2 billion metric tons.     

Aquatic biodiversity and the electric utility industry

Results from a 1995 survey of utility company biologists indicate that aquatic biodiversity is an emerging and poorly understood issue. As a result, there is some confusion about what aquatic biodiversity actually is, and how we can best conserve it. Only one fourth (24%) of the respondents said their company has a stated environmental policy that addresses biodiversity. Many respondents indicate that over the years they have not specifically managed for biodiversity, but have been doing that through their efforts to assure balanced indigenous populations. While regulations are still the major driver for biological work, an increasing number of companies are involved in voluntary partnerships in managing water resources. Of these voluntary partnerships, 70% have biodiversity as a goal. Biodiversity is becoming an increasingly common subject of study, and a vast majority (75%) of the respondents suggested it should be a goal for utility resource management. Conservation of aquatic biodiversity is a complex task, and to date most aquatic efforts have been directed toward fish and macroinvertebrates. Ecological research and technological development performed by the utility industry have resulted in a number of successful biopreservation and biorestoration success stories. A common theme to preserving or enhancing aquatic biodiversity is preserving aquatic habitat. Increasingly, ecosystem management is touted as the most likely approach to achieve success in preserving aquatic biodiversity. Several utilities are conducting progressive work in implementing ecosystem management. This paper presents the potential interactions between power plants and biodiversity, an overview of aquatic biodiversity preservation efforts within the electric utility industry, more detail on the results of the survey, and recent initiatives in ecosystem management.     

Sources and toxicities of phenolic polychlorinated biphenyls (OH-PCBs)

Polychlorinated biphenyls (PCBs), a group of 209 congeners that differ in the number and position of chlorines on the biphenyl ring, are anthropogenic chemicals that belong to the persistent organic pollutants (POPs). For many years, PCBs have been a topic of interest because of their biomagnification in the food chain and their environmental persistence. PCBs with fewer chlorine atoms, however, are less persistent and more susceptible to metabolic attack, giving rise to chemicals characterized by the addition of one or more hydroxyl groups to the chlorinated biphenyl skeleton, collectively known as hydroxylated PCBs (OH-PCBs). In animals and plants, this biotransformation of PCBs to OH-PCBs is primarily carried out by cytochrome P-450-dependent monooxygenases. One of the reasons for infrequent detection of lower chlorinated PCBs in serum and other biological matrices is their shorter half-lives, and their metabolic transformation, resulting in OH-PCBs or their conjugates, such as sulfates and glucuronides, or macromolecule adducts. Recent biomonitoring studies have reported the presence of OH-PCBs in human serum. The occurrence of OH-PCBs, the size of this group (there are 837 mono-hydroxyl PCBs alone), and their wide spectra of physical characteristics (pKa’s and log P’s ranging over 5 to 6 orders of magnitude) give rise to a multiplicity of biological effects. Among those are bioactivation to electrophilic metabolites that can form covalent adducts with DNA and other macromolecules, interference with hormonal signaling, inhibition of enzymes that regulate cellular concentrations of active hormones, and interference with the transport of hormones. This new information creates an urgent need for a new perspective on these often overlooked metabolites.     

Authentication of synthetic environmental contaminants and their (bio)transformation products in toxicology: polychlorinated biphenyls as an example

Environmental Science and Pollution Research - Toxicological studies use “specialty chemicals” and, thus, should assess and report both identity and degree of purity (homogeneity) of...     

Mutagenic and carcinogenic potency of diesel and related environmental emissions: Salmonella bioassay

Due to the expected increase in the percentage of diesel vehicles in the United States, the Environmental Protection Agency must evaluate the health effects associated with exposure to diesel emissions. Respirable particles from a variety of combustion sources have the potential of being carcinogenic and mutagenic. The objective of these studies was to determine the relative biological activity of the organic material adsorbed on these particles in in vitro mutagenesis bioassays. The organic extracts from the following series of emission sources were bioassayed in the Salmonella assay for mutagenic activity: (1) a light-duty Oldsmobile diesel 350 engine; (2) a heavy-duty Caterpillar diesel engine; (3) a light-duty Nissan engine; (4) a Volkswagen Rabbit diesel engine; (5) cigarette smoke; (6) roofing tar; (7) coke oven; and (8) a gasoline catalyst Mustang. This paper provides a comparison of these sources within the Salmonella bioassay and also demonstrates how bacterial systems can be used as a quality assurance measure in in vivo testing.     

Application of the analytic hierarchy process to compare alternatives for the long-term management of surplus mercury

This paper describes a systematic method for comparing options for the long-term management of surplus elemental mercury in the US, using the analytic hierarchy process as embodied in commercially available Expert Choice software. A limited scope multi-criteria decision analysis was performed. Two (2) general types of treatment technologies were evaluated (stabilization/amalgamation and selenide), combined with four (4) disposal options: (a) hazardous waste landfill; (b) hazardous waste monofill; (c) engineered below-ground structure; and (d) mined cavity. In addition, three storage options for elemental mercury were considered: (a) aboveground structure; (b) hardened structure; and (c) mined cavity. Alternatives were evaluated against criteria that included costs, environmental performance, compliance with current regulations, implementation considerations, technology maturity, potential risks to the public and workers, and public perception. Considering non-cost criteria only, the three storage options rank most favorably. If both cost and other criteria are considered, then landfill options are preferred, because they are the least expensive ones. Storage options ranked unfavorably on cost because: (a) even relatively small per annum costs will add up over time; and (b) storage is a temporary solution and, sooner or later, a treatment and disposal technology will be adopted, which adds to the cost. However, the analysis supports continued storage for a short period (up to a few decades) followed by permanent retirement when treatment technologies have matured. Suggestions for future work include: (a) involving additional stakeholders in the process, (b) evaluating alternatives for mercury-containing wastes rather than for elemental mercury only, (c) revisiting the analysis periodically to determine if changes are required, (d) conducting uncertainty analyses utilizing Monte Carlo-based techniques.     

Regional economic impacts of water management alternatives: the case of Devils Lake,North Dakota,USA

Devils Lake, located in a closed basin in northeastern North Dakota has over a century-long history of highly fluctuating water levels. The lake has risen nearly 25 feet (7.7 m) since 1993, more than doubling its surface area. Rising water levels have affected rural lands, transportation routes, and communities near the lake. In response to rising lake levels, Federal, state and local agencies have adopted a three-part approach to flood damage reduction, consisting of (1) upper basin water management to reduce the amount of water reaching the lake, (2) protection for structures and infrastructure if the lake continues to rise, and (3) developing an emergency outlet to release some lake water. The purpose of this study was to provide information about the net regional economic effects of a proposed emergency outlet for Devils Lake. An input-output model was used to estimate the regional economic effects of the outlet, under two scenarios: (1) the most likely future situation (MLS) and (2) a best case situation (BCS) (i.e., where the benefits from the outlet would be greatest), albeit an unlikely one. Regional economic effects of the outlet include effects on transportation (road and railroad construction), agriculture (land kept in production, returned to production sooner, or kept in production longer), residential relocations, and outlet construction expenditures. Effects are measured as changes in gross business volume (gross receipts) for various sectors, secondary employment, and local tax collections. The net regional economic effects of the proposed outlet would be relatively small, and consideration of these economic impacts would not strengthen the case for an outlet.     

Transport and fate of nitrate and pesticides: hydrogeology and riparian zone processes

There is continuing concern over potential impacts of widespread application of nutrients and pesticides on ground- and surface-water quality. Transport and fate of nitrate and pesticides were investigated in a shallow aquifer and adjacent stream, Cow Castle Creek, in Orangeburg County, South Carolina. Pesticide and pesticide degradate concentrations were detected in ground water with greatest frequency and largest concentrations directly beneath and downgradient from the corn (Zea mays L.) field where they were applied. In almost all samples in which they were detected, concentrations of pesticide degradates greatly exceeded those of parent compounds, and were still present in ground waters that were recharged during the previous 18 yr. The absence of both parent and degradate compounds in samples collected from deeper in the aquifer suggests that this persistence is limited or that the ground water had recharged before use of the pesticide. Concentrations of NO(-)(3) in ground water decreased with increasing depth and age, but denitrification was not a dominant controlling factor. Hydrologic and chemical data indicated that ground water discharges to the creek and chemical exchange takes place within the upper 0.7 m of the streambed. Ground water had its greatest influence on surface-water chemistry during low-flow periods, causing a decrease in concentrations of Cl(-), NO(-)(3), pesticides, and pesticide degradates. Conversely, shallow subsurface drainage dominates stream chemistry during high-flow periods, increasing stream concentrations of Cl(-), NO(-)(3), pesticides, and pesticide degradates. These results point out the importance of understanding the hydrogeologic setting when investigating transport and fate of contaminants in ground water and surface water.