Improving Baghouse Performance at the Monticello Generating Station

At the Monticello station, operated by the Texas Utilities Generating Company, lignite coal obtained locally in Titus and Hopkins Counties fuels each of the three units. Units 1 and 2 are identical 575-MW Combustion Engineering (CE) boilers, each of which discharges its effluent to a 36- compartment shake/deflate cleaned baghouse paralleled with four electrostatic precipitators (ESP). Unit 3 is a larger boiler and is followed by an ESP and a scrubber. The Unit 1 and 2 baghouses were designed to clean 80 percent of the flue gas. Since startup, these baghouses have regularly experienced flange-to-flange pressure drops in excess of 10 in. H₂O, with large opacity spikes caused by ash bleeding through the bags after compartment cleanings. Because of higher-than-expected pressure drop, the baghouses receive only about 45-50 percent of the flue gas. Analysis has shown the Monticello lignite ash significantly differs from most other coal ashes. Testing has shown that the Monticello ash is not filtered effectively by many "standard" bag materials. However, this testing indicates that there are fabrics that show promise of eliminating the ash bleedthrough with little pressure drop penalty. Testing has also shown that injection of low concentrations (10-15 ppm) of ammonia (NH₃) into the flue gas significantly decreases ash bleedthrough, so that with NH₃ injection "standard" bag materials may perform adequately. Currently, fullcompartment testing of four fabrics, with and without NH₃ injection, is under way at the Unit 1 baghouse. The research conducted at the Monticello station is reviewed in this paper and the encouraging results from the full-compartment tests are presented.     

Effect of Common Chemical Treatments on the Process Kinetics and Mechanical Properties of Flax/Epoxy Composites Manufactured by Resin Infusion

Chemical treatments are widely employed to improve the fiber-matrix adhesion in composites based on eco-friendly fibers such as flax. To better understand the influence of these treatments on processing behavior, this study characterized the surface chemistry and morphology of woven flax fabrics treated by acetone, alkaline, silane and diluted epoxy. Flax/epoxy composites were then manufactured by resin infusion and the flow front and preform thickness evolution was monitored. The alkaline treatment was shown to result in a 50 % increase in equivalent permeability due to an increase in porosity which led to a decrease in flexural properties. The processing results were found to be in good agreement with predictions of a 1-dimensional model. This study suggests that infusion times are not considerably affected by the observed changes in surface energy. However, other implications of the treatments such as an increase in fibrillation can alter the infusion times significantly.

     

Feasibility of mercury removal from simulated flue gas by activated chars made from poultry manures

Increased emphasis on reduction of mercury emissions from coal fired electric power plants has resulted in environmental regulations that may in the future require application of activated carbons as mercury sorbents for mercury removal. At the same time, the quantity of poultry manure generated each year is large and technologies that take advantage of the material should be explored. The purpose of the work was to obtain preliminary data to investigate if activated chars made from different poultry manures could adsorb mercury from simulated flue gas. In laboratory experiments, activated chars made from chicken cake and litter removed mercury from the gas as well as a commercial alternative. It was also found that acid-washing these chars after activation may improve pore structure but does not influence the mercury removal efficiency. Activated chars were also made from turkey cake and litter. These raw materials produced activated chars with similar pore structure as those made from chicken manure, but they did not adsorb mercury as well. Acid-washing the turkey manure-based chars improved their performance, but this step would add to the cost of production. Preliminary evaluations suggest that unwashed activated chars may cost as little as $0.95/kg to produce.     

APPLICATION OF ENHANCED ANNEALING TO GROUND WATER REMEDIATION DESIGN1

ABSTRACT: A methodology for ground water remediation design has been developed that interfaces ground water simulation models with an enhanced annealing optimizer. The ground water flow and transport simulators provide the ability to consider site‐specific contamination and geohydrologic conditions directly in the assessment of alternative remediation system designs. The optimizer facilitates analysis of tradeoffs between technical, environmental, regulatory, and financial risks for alternative design and operation scenarios. A ground water management model using an optimization method referred to as “enhanced annealing” (simulated annealing enhanced to include “directional search” and “memory” mechanisms) has been developed and successfully applied to an actual restoration problem. The demonstration site is the contaminated unconfined aquifer referred to as N‐Springs located at Han‐ford, Washington. Results of the demonstration show the potential for improving groundwater restoration system performance while reducing overall system cost.     

A user evaluation of biodegradable cutlery

This paper summarizes a study evaluating the acceptance and perceived performance of disposable cutlery made from starch-based biodegradable resins relative to nondegradable polystyrene cutlery. Two hundred forty-three sailors onboard three U.S. Navy vessels ate their lunch using either biodegradable cutlery made with resins manufactured by one of two commercial companies or polystyrene cutlery. The cutlery was rated on several sensory and performance dimensions as well as for overall acceptability. Results indicated that sailors rated both the biodegradable and the polystyrene utensils as easy to hold. There were also no differences in the perceived ease of using each of the spoons. However, compared to the polystyrene utensils, both types of biodegradable utensils were viewed as less sturdy, as having a less attractive color, and as being less acceptable overall. The biodegradable forks and knives were also rated as more difficult to use for piercing and cutting food than the polystyrene ones. In addition, several significant differences emerged between the two types of biodegradable cutlery. The results are discussed in terms of the need for continued consumer testing of products developed from biodegradable polymeric materials.     

Covariance structure modeling in organizational research: Problems with the method versus applications of the method

Brannick (1995) offers several criticisms of how covariance structure analysis techniques (CSA—also known as causal modeling methods) are being used by organizational researchers, as well as some suggestions for improving organizational research. This article responds to some of the issues raised by Brannick (1995), points out areas of agreement and disagreement, and offers some reactions to his suggestions for how future use of CSA methods can be improved.     

Large-scale constructed wetlands for nutrient removal from stormwater runoff: An everglades restoration project

The South Florida Water Management District (SFWMD) constructed a wetland south of Lake Okeechobee to begin the process of removing nutrients (especially phosphorus) from agricultural stormwater runoff entering the Everglades. The project, called the Everglades Nutrient Removal (ENR) project, is a prototype for larger, similarly constructed wetlands that the SFWMD will build as part of the Everglades restoration program. This innovative project is believed to be one of the largest agricultural stormwater cleanup projects in the United States, if not in the world. This publication describes the ENR project's design, construction, and proposed operation, as well as the proposed research program to be implemented over the next few years.     

PHOSPHORUS MANAGEMENT TO PROTECT LAKE WATER QUALITY1

ABSTRACT: The Hallett Quarry gravel pit lakes are an active sand and gravel extraction operation located 0.4 km north of the City of Ames, Iowa. During periods of drought, these lakes serve as a supplemental water supply for Ames. A modified version of the Vollenweider input-output model was used to predict future water quality under various watershed land use, drainage, and lake configurations. The dominant factor controlling the future water quality of the lakes was found to be the nutrient input. It is recommended that a management plan to protect the future water quality should be oriented towards reducing the sources of phosphorus to the lakes.     

APPLICATION OF AN ENVIRONMENTAL AND ECONOMIC MODELING SYSTEM FOR WATERSHED ASSESSMENTS1

ABSTRACT: A National Pilot Project (NPP) on Livestock and the Environment was initiated in 1992 to help provide solutions to environmental problems associated with livestock production. A major development of the NPP was the Comprehensive Economic and Environmental Optimization Tool‐Livestock and Poultry (CEEOT‐LP), an integrated modeling system designed to produce economic and environmental indicators for alternative policy scenarios applied to intensive livestock production watersheds. The system consists of a farm‐level economic model (FEM) and two environmental models: the field‐scale APEX model and the watershed‐level SWAT model. To date, CEEOT‐LP has been applied to two watersheds in Texas and one in Iowa. Predicted reductions in P losses for two P‐based manure application rate scenarios, relative to baseline conditions, ranged from ?4 to ?54 percent across the three watersheds; however, N loss impacts ranged from a decrease of 34 percent to an increase of 79 percent. For five other alternative scenarios that were simulated for only one watershed, N and P loss impacts ranged between a reduction of 78 percent to an increase of 20 percent. Aggregate watershed‐level economic impacts of the seven scenarios spanned a spectrum of a 27 percent decrease to a 25 percent increase in profit, relative to the baseline.     

Advancing the use of an innovative cleanup technology: Case study of Lasagna™

Originated from a recognized need for significantly more effective technologies for soil cleanup, the Lasagna^TM project provides an interesting case study in which industry, government, and academia successfully collaborated to rapidly advance the technology from the laboratory to the field. Called Lasagna^TM because of its layered configurations, the technology combines electrically induced contaminant transport in soils, treatment in place, and geotechnical methods to achieve completely in situ clean-up of contaminated soils. Experiences with respect to the partnership, the development of technology and its current commercialization status are described.