An updated state of the science EQC model for evaluating chemical fate in the environment: application to D5 (decamethylcyclopentasiloxane)

The EQuilibrium Criterion (EQC) model developed and published in 1996 has been widely used for screening level evaluations of the multimedia, fugacity-based environmental fate of organic chemicals for educational, industrial, and regulatory purposes. Advances in the science of chemical partitioning and reactivity and the need for more rigorous regulatory evaluations have resulted in a need to update the model. The New EQC model is described which includes an improved treatment of input partitioning and reactivity data, temperature dependence and an easier sensitivity and uncertainty analysis but uses the same multi-level approach, equations and environmental parameters as in the original version. A narrative output is also produced. The New EQC model, which uses a Microsoft Excel platform, is described and applied in detail to decamethylcyclopentasiloxane (D5; CAS No. 541-02-6). The implications of these results for the more detailed exposure and risk assessment of D5 are discussed. The need for rigorous evaluation and documentation of the input parameters is outlined.     

Key competencies in sustainability: a reference framework for academic program development

The emerging academic field focused on sustainability has been engaged in a rich and converging debate to define what key competencies are considered critical for graduating students to possess. For more than a decade, sustainability courses have been developed and taught in higher education, yet comprehensive academic programs in sustainability, on the undergraduate and graduate level, have emerged only over the last few years. Considering this recent institutional momentum, the time is seemingly right to synthesize the discussion about key competencies in sustainability in order to support these relatively young academic programs in shaping their profiles and achieving their ambitious missions. This article presents the results of a broad literature review. The review identifies the relevant literature on key competencies in sustainability; synthesizes the substantive contributions in a coherent framework of sustainability research and problem-solving competence; and addresses critical gaps in the conceptualization of key competencies in sustainability. Insights from this study lay the groundwork for institutional advancements in designing and revising academic programs; teaching and learning evaluations; as well as hiring and training faculty and staff.     

Work-contingent self-esteem: A boon or bane for worker well-being?

Work-contingent self-esteem (WCSE; the degree to which workers' self-esteem is based on workplace performance) has positive consequences for performance, yet less is known about its consequences for well-being. In this paper, we contribute to the literature on WCSE by examining the mechanisms through which it impacts well-being at work and outside of work. We challenge contingent self-esteem (CSE) theory (Crocker & Park, 2004), which argues that CSE negatively impacts well-being by fostering internally controlled (introjected) motivation and diminishing autonomous motivation, by suggesting that WCSE fosters autonomous and internally controlled motivation and thus has both beneficial and harmful effects on well-being. We also expand CSE theory by suggesting that WCSE can negatively impact well-being outcomes by causing work–nonwork conflict. Results from a time-separated design in a sample of full-time employees supported our arguments, revealing that WCSE impacted well-being at work through both autonomous and internally controlled work motivations. WCSE also had negative effects on well-being at and outside of work through work–nonwork conflict. The beneficial effects of WCSE outweighed its harmful effects on job satisfaction and neutralized its harmful effects for all other outcomes. We discuss theoretical implications for CSE theory, self-determination theory, and work–nonwork issues and note important practical implications.     

Managing volunteers: FEMA's Urban Search and Rescue programme and interactions with unaffiliated responders in disaster response

In the aftermath of disasters it is not uncommon for a large number of individuals, ranging from professional technical responders to untrained, albeit well meaning, volunteers, to converge on site of a disaster in order to offer to help victims or other responders. Because volunteers can be both a help and a hindrance in disaster response, they pose a paradox to professional responders at the scene. Through focus group interviews and in-depth structured interviews, this paper presents an extended example of how Urban Search and Rescue (US&R) task forces, a type of professional technical-responder organisation, interact with and utilise volunteers. Findings show that US&R task forces evaluate the volunteers in terms of their presumed legitimacy, utility, and potential liability or danger posed during the disaster response. Other responses to volunteers such as a feeling of powerlessness or the use of volunteers in non-technical ways are also explored. This paper demonstrates some key aspects of the relationship between volunteers and formal response organisations in disasters.     

Removal of PCBs from a Contaminated Soil Using CF-Systems® Solvent Extraction Process

ABSTRACT

The U.S. Environmental Protection Agency’s (EPA) Superfund Technical Assistance Response Team (START) in cooperation with EPA’s Superfund Innovative Technology Evaluation (SITE) program evaluated a pilot scale solvent extraction process developed by CF-Systems. This process uses liquefied propane to extract organic contaminants from soils, sludges, and sediments. A pilot-scale evaluation was conducted in Golden, CO at Hazen Research, Inc., using CF-Systems’ trailer-mounted organics extraction unit. Approximately 1,000 pounds of soil, with an average poly-chlorinated biphenyl (PCB) concentration of 260 mg/kg, was obtained from a remote Superfund site. Six 100-pound batches of the contaminated soil were extracted using multiple extraction sequences. Three of the six batch runs were subjected to three extraction sequences each, so that process variability could be evaluated. Results showed that PCB removal efficiencies varied between 91.4 and 99.4%, with the propane-extracted soils retaining low concentrations of PCBs (19.0–1.8 mg/kg). Removal efficiencies of oil and grease (O&G) were found to be 96.0 to 99.6% with propane-extracted soils retaining O&G concentrations from 279 to <20 mg/kg. Overall extraction efficiency was found to be dependant upon the numberof extraction cycles used.     

Uncertainty analysis using a fugacity-based multimedia mass-balance model: Application of the updated EQC model to decamethylcyclopentasiloxane (D5)

The EQuilibrium Criterion (EQC) model developed and published in 1996 was recently revised to include improved treatment of input partitioning and reactivity data, temperature dependence and an easier sensitivity and uncertainty analysis. This New EQC model was used to evaluate the multimedia, fugacity-based fate of decamethylcyclopentasiloxane (D5; CAS No. 541-02-6) in the environment over a temperature range of 1–25 °C. In addition, Monte Carlo uncertainty analysis was used to quantitatively determine the influence of temperature and input partitioning and reactivity data on the behavior of D5 under various emission scenarios. Results indicated that emission mode was the most influential factor determining the fate and distribution of D5 in the model environment. When emitted to air and soil, D5 partitioned to and remained in the air compartment where rates of removal from degradation and advection processes were relatively rapid. In contrast, D5 emitted to water resulted in a substantial mass fraction of D5 being accumulated in the sediment compartment, where rates of removal from degradation and advection processes were slow. The mass distributions and fate of D5 in the model environment were strongly influenced by multiple input parameters, including temperature, the mode of emission (especially emission rate to water), K_OC and half-life in air. As temperature decreased from 25 °C to 1 °C, K_OC and half-life in air became increasingly more influential such that the mass distribution of D5 increased in air and decreased in sediment, resulting in decreased overall persistence.     

Status and trends of terrestrial arthropod abundance and diversity in the North Atlantic region of the Arctic

Ambio - The Circumpolar Biodiversity Monitoring Programme (CBMP) provides an opportunity to improve our knowledge of Arctic arthropod diversity, but initial baseline studies are required to...     

Bench‐ and pilot‐scale applications of electrochemical peroxidation: A new remedial concept

Electrochemical peroxidation (ECP) is a proprietary process that utilizes sacrificial iron electrodes and stochiometrically balanced applications of hydrogen peroxide to efficiently destroy aqueous phase contaminants. In laboratory trials it has been successful in reducing, often to non‐detectable levels, BTEX, fuel additives, chlorinated solvents, and polychlorinated biphenyls in ground waters. The process has also been found effective in reducing the chemical and biological oxygen demand of industrial waste water. Agency‐approved pilot tests will be conducted at two gasoline spill sites during 2000 where traditional pump and treat methods have proven ineffectual because of ground water chemistry or subsurface hydrologic conditions. The ECP process utilizes a tripartite treatment strategy consisting of 1) ex situ chemical oxidation; 2) in situ oxidation by reinjection of treated water with residual oxidants at the head of the plume; and 3) reestablishment of aerobic biodegradation by alteration of subsurface redox conditions. In contrast to other in situ oxidation treatment methods, dissolved iron is derived electrochemically, negating the need for ferrous salt addition. Dilute hydrogen peroxide (3 percent) is incrementally added to maximize oxidation efficiency and eliminate safety and environmental concerns accompanying the use of highly concentrated solutions. Results of laboratory trials and the geological and geochemical considerations of upcoming pilot‐scale applications are presented. Other potential applications currently under investigation include combination with other remedial processes (e.g. permeable barriers and hydrogen release compounds) to insure complete and rapid contaminant mineralization.     

Global potential of phosphorus recovery from human urine and feces

This study geospatially quantifies the mass of an essential fertilizer element, phosphorus, available from human urine and feces, globally, regionally, and by specific country. The analysis is performed over two population scenarios (2009 and 2050). This important material flow is related to the presence of improved sanitation facilities and also considers the global trend of urbanization. Results show that in 2009 the phosphorus available from urine is approximately 1.68 million metric tons (with similar mass available from feces). If collected, the phosphorus available from urine and feces could account for 22% of the total global phosphorus demand. In 2050 the available phosphorus from urine that is associated with population increases only will increase to 2.16 million metric tons (with similar mass available from feces). The available phosphorus from urine and feces produced in urban settings is currently approximately 0.88 million metric tons and will increase with population growth to over 1.5 million metric tons by 2050. Results point to the large potential source of human-derived phosphorus in developing regions like Africa and Asia that have a large population currently unserved by improved sanitation facilities. These regions have great potential to implement urine diversion and reuse and composting or recovery of biosolids, because innovative technologies can be integrated with improvements in sanitation coverage. In contrast, other regions with extensive sanitation coverage like Europe and North America need to determine how to retrofit existing sanitation technology combined that is combined with human behavioral changes to recover phosphorus and other valuable nutrients.     

Developing an automated risk management tool to minimize bird and bat mortality at wind facilities

A scarcity of baseline data is a significant barrier to understanding and mitigating potential impacts of offshore development on birds and bats. Difficult and sometimes unpredictable conditions coupled with high expense make gathering such data a challenge. The Acoustic and Thermographic Offshore Monitoring (ATOM) system combines thermal imaging with acoustic and ultrasound sensors to continuously monitor bird and bat abundance, flight height, direction, and speed. ATOM’s development and potential capabilities are discussed, and illustrated using onshore and offshore test data obtained over 16 months in the eastern USA. Offshore deployment demonstrated birds tending to fly into winds and activity declining sharply in winds >10 km h^?1. Passerines showed distinct seasonal changes in flight bearing and flew higher than non-passerines. ATOM data could be used to automatically shut down wind turbines to minimize collision mortality while simultaneously providing information for modeling activity in relation to weather and season.