Prioritizing debt conversion opportunities for marine conservation

Incentivized debt conversion is a financing mechanism that can assist countries with a heavy debt burden to bolster their long-term domestic investment in nature conservation. The Nature Conservancy, an international conservation-based nongovernmental organization, is adapting debt conversions to support marine conservation efforts by small island developing states and coastal countries. Prioritizing debt conversion opportunities according to their potential return on investment can increase the impact and effectiveness of this finance mechanism. We developed guidance on how to do so with a decision-support approach that relies on a novel threat-based adaptation of cost-effectiveness analysis. We constructed scenarios by varying parameters of the approach, including enabling conditions, expected benefits, and threat classifications. Incorporating both abatable and unabatable threats affected priorities across planning scenarios. Similarly, differences in scenario construction resulted in unique solution sets for top priorities. We show how environmental organizations, private entities, and investment banks can adopt structured prioritization frameworks for making decisions about conservation finance investments, such as debt conversions. Our guidance can accommodate a suite of social, ecological, and economic considerations, making the approach broadly applicable to other conservation finance mechanisms or investment strategies that seek to establish a transparent process for return-on-investment decision-making.     

Effect of surfactants, dispersion and temperature on solubility and biodegradation of phenanthrene in aqueous media

In the present study surfactant addition with the help of either a mechanical dispersion or a thermal treatment was applied in order to increase the solubility and the bioavailability of phenanthrene in aqueous media, and therefore to promote its biodegradation. Among four tested surfactants (Tween 80, Brij 30, sodium dodecyl sulphate and rhamnolipids), Brij 30 (0.5 gL(-1)) showed the best results allowing us to attain about 20 mgL(-1) of soluble phenanthrene. An additional thermal treatment at 60°C for 24h, 200 rpm permitted to increase the solubility of phenanthrene in the presence of Brij 30 (0.5 gL(-1)) to about 30 mgL(-1). Higher dispersions of phenanthrene particles as well as the reduction of their size were obtained using Ultra-Turrax and French press. The biodegradation of phenanthrene by Pseudomonas putida was then investigated. The reduction of size of phenanthrene particles by mechanical dispersion did not influence its biodegradation, suggesting that P. putida consumed only soluble phenanthrene. The addition of Brij 30 (0.5 gL(-1)) permitted to obtain more phenanthrene metabolized. The use of Brij 30 coupled with a transitory heating of phenanthrene-containing medium at 60°C led to an even more complete biodegradation. This might be a promising way to enhance biodegradation of PAHs.     

Effects of sulfur dioxide and oxides of nitrogen emission reductions on fine particulate matter mass concentrations: regional comparisons

Two thermodynamic equilibrium models were applied to estimate changes in mean airborne fine particle (PM2.5) mass concentrations that could result from changes in ambient concentrations of sulfate, nitric acid, or ammonia in the southeastern United States, the midwestern United States, and central California. Pronounced regional differences were found. Southeastern sites exhibited the lowest current mean concentrations of nitrate, and the smallest predicted responses of PM2.5 nitrate and mass concentrations to reductions of nitric acid, which is the principal reaction product of the oxidation of nitrogen dioxide (NO2) and the primary gas-phase precursor of fine particulate nitrate. Weak responses of PM2.5 nitrate and mass concentrations to changes in nitric acid levels occurred even if sulfate concentrations were half of current levels. The midwestern sites showed higher levels of fine particulate nitrate, characterized by cold-season maxima, and were projected to show decreases in overall PM levels following decreases of either sulfate or nitric acid. For some midwestern sites, predicted PM2.5 nitrate concentrations increased as modeled sulfate levels declined, but sulfate reductions always reduced the predicted fine PM mass concentrations; PM2.5 nitrate concentrations became more sensitive to reductions of nitric acid as modeled sulfate concentrations were decreased. The California sites currently have the highest mean concentrations of fine PM nitrate and the lowest mean concentrations of fine PM sulfate. Both the estimated PM2.5 nitrate and fine mass concentrations decreased in response to modeled reductions of nitric acid at all California sites. The results indicate important regional differences in expected PM2.5 mass concentration responses to changes in sulfate and nitrate precursors. Analyses of ambient data, such as described here, can be a key part of weight of evidence (WOE) demonstrations for PM2.5 attainment plans. Acquisition of the data may require special sampling efforts, especially for PM2.5 precursor concentration data.     

Quantification of biotransformation of chlorinated hydrocarbons in a biostimulation study: added value via stable carbon isotope analysis

Stable carbon isotope analysis of chlorinated aliphatic compounds was performed at an in situ biostimulation pilot test area (PTA) at a site where 1,2-dichloroethane (1,2-DCA) and trichloroethene (TCE) were present in groundwater. Chlorinated products of TCE reductive dechlorination (cis-dichloroethene (cDCE) and vinyl chloride (VC)) were present at concentrations of 17.5 to 126.4 micromol/L. Ethene, a potential degradation product of both 1,2-DCA dihaloelimination and TCE reductive dechlorination was also present in the PTA. Emulsified soybean oil and lactate were added as electron donors to stimulate anaerobic dechlorination in the PTA. Stable carbon isotope analysis provided evidence that dechlorination was occurring in the PTA during biostimulation, and a means of monitoring changes in dechlorination efficiency over the 183 day monitoring period. Stable carbon isotope analysis was also used to determine if ethene production in the PTA was due to dechlorination of TCE, 1,2-DCA, or both. Fractionation factors (alpha) were determined in the laboratory during anaerobic biotransformation of 1,2-DCA via a dihaloelimination reaction in four separate enrichment cultures. These alpha values (as well as the previously published ranges of alpha for the dechlorination of TCE, cDCE and 1,2-DCA) were used, along with isotopic values measured during the pilot test, to derive quantitative estimates of biotransformation during the pilot test. Dechlorination was found to account for 10.7 to 35.9%, 21.9 to 74.9%, and 54.4 to 67.8% of 1,2-DCA, TCE and cDCE concentration loss respectively in the PTA. Stable carbon isotope analysis indicates that dechlorination of 1,2-DCA, TCE and cDCE were all significant processes during the pilot test, while ethene production during the pilot test was dominated by 1,2-DCA dihaloelimination. This study demonstrates how stable carbon isotope analysis can provide more conservative estimates of the extent of biotransformation than do conventional protocols. In addition, in a complex mixed plume such as this, compound specific isotope analysis is shown to be one of the few methods available for clarifying dominant biotransformation pathways where breakdown products are non-exclusive (i.e. ethene).     

Five approaches to producing actionable science in conservation

The knowledge produced by conservation scientists must be actionable in order to address urgent conservation challenges. To understand the process of creating actionable science, we interviewed 71 conservation scientists who had participated in 1 of 3 fellowship programs focused on training scientists to become agents of change. Using a grounded theory approach, we identified 16 activities that these researchers employed to make their scientific products more actionable. Some activities were more common than others and, arguably, more foundational. We organized these activities into 3 nested categories (motivations, strategies, and tactics). Using a co-occurrence matrix, we found that most activities were positively correlated. These correlations allowed us to identify 5 approaches, framed as profiles, to actionable science: the discloser, focused on open access; the educator, focused on science communication; the networker, focused on user needs and building relationships; the collaborator, focused on boundary spanning; and the pluralist, focused on knowledge coproduction resulting in valuable outcomes for all parties. These profiles build on one another in a hierarchy determined by their complexity and level of engagement, their potential to support actionable science, and their proximity to ideal coproduction with knowledge users. Our results provide clear guidance for conservation scientists to generate actionable science to address the global biodiversity conservation challenge.     

Aligning the logics of inquiry and action to address the biodiversity crisis

Despite an abundance of research reaffirming biodiversity's importance to the health of the planet and society, species continue to go extinct at an alarming rate. Why has continued research on the value of biodiversity not had the intended effect and what can be done about it? We considered biodiversity loss as a public value failure and the result of a misalignment between the logic of inquiry (which guides scientists) and the logic of action (which guides practitioners). We drew lessons from our own research to propose the creation of a national biodiversity strategy designed to link the logic of inquiry with the logic of action and coordinate the production of actionable conservation science and informed conservation action.     

Manipulating the perceived opportunity to cheat: an experimental test of the active roles of male and female zebra finches in mate guarding behavior

Birds are commonly sexually promiscuous, which can lead to conflict between the sexes and the evolution of paternity assurance strategies, such as mate guarding. Adaptive explanations for mate guarding have tended to focus on fitness consequences for males, but mate guarding and participation in being guarded is also likely adaptive for females in certain contexts. To better understand the adaptive explanations for mate guarding as well as the observed variation in paternity patterns, it is necessary to explore the relative costs and benefits of guarding (and being guarded) from both the male and female perspective. To investigate these costs and benefits, we conducted an experiment with the Australian zebra finch (Teniopygia guttata) in which we independently varied the perceived opportunity for each member of a captive breeding pair to engage in extra-pair copulation (EPC) solicitation behavior; as an individual’s EPC opportunity increased, the partner’s EPC opportunity remained constant. Our results indicate that, for males, mate guarding intensity increases when their female’s EPC opportunity increases but decreases when their own (i.e., male) EPC opportunity increases. We did not find evidence of flexible female guarding behavior, but we found that females do not evade their partners more as female EPC opportunity increases.     

A comparison of data quality control protocols for atmospheric mercury speciation measurements

Significant advances in the measurement of atmospheric mercury species have been made in the past 10 years yet limited protocols on quality control (QC) and assurance on this data have been published in the literature. Recently, considerable work has been done to develop quality control and assurance programs within North America. Environment Canada and the National Atmospheric Deposition Network (NADP) independently developed programs, RDMQ? and AMQC, respectively, to QC atmospheric mercury speciation data (including gaseous elemental mercury (GEM), reactive gaseous mercury (RGM) and mercury associated to particles (PHg)). These 2 programs were assessed by the criteria on which the data is QCed and comparability of the final data products. Results show that the criteria used to flag data compare well within the 4 tested sites and that the number of flags for each criterion is generally comparable. The QC programs were applied to 2 distinct data sets and the final QCed data was compared. From a mid-latitude site, the final data sets compare very well and showed there to be a 0.3, 8.6 and 15% difference in the mean GEM, RGM and PHg concentrations post QC of each program. It is recommended that either the RDMQ or the AMQC programs be employed for a typical mid-latitude site. When the QC programs were applied to highly variable data, the data do not compare as well for RGM and PHg. Results showed a 2.7, 27 and 33% difference in the mean GEM, RGM and PHg concentrations, respectively, post QC of each program. It is recommended that RDMQ be used for data that is highly variable with high RGM/PHg concentrations as it allows for more manual correction over the QCed data. This investigation of 2 QC programs produced comparable data and that either of these programs can be used as standard methods for the quality control of atmospheric mercury speciation data.     

Enhanced removal of heavy metals in primary treatment using coagulation and flocculation.

The goal of this study was to determine the removal efficiencies of chromium, copper, lead, nickel, and zinc from raw wastewater by chemically enhanced primary treatment (CEPT) and to attain a total suspended solids removal goal of 80%. Operating parameters and chemical doses were optimized by bench-scale tests. Locally obtained raw wastewater samples were spiked with heavy metal solutions to obtain representative concentrations of metals in wastewater. Jar tests were conducted to compare the metals removal efficiencies of the chemical treatment options using ferric chloride, alum, and anionic polymer. The results obtained were compared with those from other studies. It was concluded that CEPT using ferric chloride and anionic polymer is more effective than CEPT using alum for metals removal. The CEPT dosing of 40 mg/L ferric chloride and 0.5 mg/L polymer enhanced heavy metals removal efficiencies by over 200% for chromium, copper, zinc, and nickel and 475% for lead, compared with traditional primary treatment. Efficient metals capture during CEPT can result in increased allowable headworks loadings or lower metal levels in the outfall.     

NMOC,ozone, and organic aerosol in the southeastern United States, 1999–2007: 1. Spatial and temporal variations of NMOC concentrations and composition in Atlanta,Georgia

Volatile organic compounds (VOCs) are emitted from anthropogenic and natural (biogenic) sources into the atmosphere. Characterizing their ambient mixing ratios or concentrations is a challenge because VOCs comprise hundreds of species, and accurate measurements are difficult. Long-term hourly and daily-resolution data have been collected in the metropolitan area of Atlanta, Georgia, a major city dominated by motor vehicle emissions. A series of observations of daily, speciated C₂–C₁₀ non-methane organic compounds (NMOC) and oxygenated hydrocarbons (OVOC) in mid-town Atlanta (Jefferson Street, JST) are compared with data from three urban-suburban sites and a nearby non-urban site. Annual-average mixing ratios of NMOC and OVOC at JST declined from 1999 through 2007. Downward trends in NMOC, CO, and NO_y corroborate expected emission changes as reflected in emission inventories for Atlanta’s Fulton County. Comparison of the JST NMOC composition with data from roadside and tunnel sampling reveals similarities to motor vehicle dominated samples. The JST annual average VOC-OH reactivities from 1999 to 2007 were relatively constant compared with the decline in annual-average NMOC mixing ratios. Mean reactivity at JST, in terms of concentration*k_OH, was approximately 40% alkenes, 22% aromatics, 16% isoprene and 6% other biogenics, 13% C₇–C₁₀ alkanes and 3% C₂-C₆ alkanes, indicating that biogenic NMOCs are important but not dominant contributors to the urban reactive NMOC mix. In contrast, isoprene constituted ～50% of the VOC-OH reactivities at two non-urban sites. Ratios of 24-hour average CO/benzene, CO/isopentane, and CO/acetylene concentrations indicate that such species are relatively conserved, consistent with their low reactivity. Ratios of more-reactive to less-reactive species show diurnal variability largely consistent with expected emission patterns, transport and mixing of air, and chemical processing.